Interface-engineered TiO2 molecularly imprinted photocatalysts with synergistic adsorption–photocatalysis enhancement for metronidazole removal in real wastewater
Source abstract
Abstract
Conventional photocatalysts often show limited efficiency in complex aqueous matrices because reactive oxygen species (ROS) are rapidly scavenged by competing solutes. To overcome this limitation, TiO 2 –polymer hybrids bearing molecularly imprinted adsorption sites selective toward metronidazole (MNZ) were synthesised to preconcentrate the pollutant near the photocatalyst surface. Molecularly imprinted (MIP) and non-imprinted (NIP) materials with different polymer-to-TiO 2 mass ratios were prepared to examine how interfacial polymer architecture affects adsorption and photocatalytic performance. Structural and optical analyses confirmed the formation of a thin surface-confined polymer layer that preserved the TiO 2 crystal structure while introducing adsorption centres. All materials followed Langmuir adsorption behaviour. MIPs exhibited 3–4-fold higher adsorption capacities than NIPs and pseudo-second-order kinetics consistent with cavity-driven MNZ binding, whereas NIPs showed faster but non-specific uptake. Under UV irradiation, photocatalytic activity correlated with these interfacial features. MIP_1:10 and MIP_1:5 achieved the highest MNZ removal (∼95%), indicating that increased recognition-site density can offset light attenuation at higher polymer loadings. In municipal wastewater, efficiencies decreased, but MIPs consistently outperformed NIPs. These results show that imprinting-layer thickness and interfacial architecture govern the balance between selective adsorption and photocatalytic degradation in TiO 2 -based hybrids.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Pharmaceutical and Antibiotic Environmental Impacts · TiO2 Photocatalysis and Solar Cells · Adsorption and biosorption for pollutant removal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Impacts of pharmaceutical and personal care products contamination as emerging contaminants in urban ecosystem: emerging risks and future challenges10.1186/s12302-025-01210-w ↗
2. Environmental risk and risk of resistance selection due to antimicrobials’ occurrence in two Polish wastewater treatment plants and receiving surface water10.3390/molecules25061470 ↗
3. Antibiotic residues in final effluents of European wastewater treatment plants and their impact on the aquatic environment10.1016/j.envint.2020.105733 ↗
4. Strategies to combat antibiotic resistance in the wastewater treatment plants10.3389/fmicb.2017.02603 ↗
5. Assessing the risk of antimicrobial resistance and potential environmental harm through national-scale surveillance of antimicrobials in hospital and community wastewater10.1016/j.envint.2025.109606 ↗
6. Understanding the pivotal role of ubiquitous Yellow River suspend sediment in efficiently degrading metronidazole pollutants in water environments10.1016/j.scitotenv.2024.172522 ↗
7. Pharmaceutical pollution of the world’s rivers
8. Toward selective oxidation of contaminants in aqueous systems10.1021/acs.est.1c05862 ↗
9. Molecularly imprinted titanium dioxide: synthesis strategies and applications in photocatalytic degradation of antibiotics from marine wastewater: a review10.3390/ma18092161 ↗
10. Porous BiOBr/Bi2MoO6 heterostructures for highly selective adsorption of methylene blue10.1021/acsomega.6b00160 ↗
11. Unveiling the enhanced selectively photocatalytic degradation for polyphenolic component of Chinese pharmaceutic wastewater by Bi2MoO6/pBC/g-C3N4 S-scheme heterojunction: DFT calculations and mechanism insights10.1016/j.jwpe.2025.107852 ↗
12. Selectivity enhancement in heterogeneous photocatalytic transformations10.1021/acs.chemrev.6b00396 ↗
13. Enhanced degradation of micropollutants by visible light photocatalysts with strong oxygen activation ability10.1016/j.watres.2023.120785 ↗
14. Impact of water matrices on oxidation effects and mechanisms of pharmaceuticals by ultraviolet-based advanced oxidation technologies: a review10.1016/j.scitotenv.2022.157162 ↗
15. Selective micropollutant degradation via nanoconfined core-shell heterostructures with robust resilience to water matrices10.1038/s41467-025-66432-1 ↗
16. Impact of water matrix on the photocatalytic removal of pharmaceuticals by visible light active materials
17. Merits and limitations of radical vs. nonradical pathways in persulfate-based advanced oxidation processes10.1021/acs.est.3c05153 ↗
18. Facet-dependent photocatalytic mechanisms of anatase TiO2: a new sight on the self-adjusted surface heterojunction10.1016/j.jallcom.2015.06.204 ↗
19. TiO2 microspheres with cross-linked cyclodextrin coating exhibit improved stability and sustained photocatalytic degradation of bisphenol a in secondary effluent10.1016/j.watres.2020.116095 ↗
20. Enhanced and selective degradation of pollutants over cyclodextrin/TiO2 under visible light irradiation10.1021/ie201694v ↗
21. Photocatalytic selective degradation of catechol and resorcinol on the TiO2 with exposed 001 facets: roles of two types of hydroxyl radicals10.3390/catal12040378 ↗
22. Specific facets-dominated anatase TiO2: fluorine-mediated synthesis and photoactivity10.3390/catal3020455 ↗
23. A brief overview of molecularly imprinted polymers: highlighting computational design, nano and photo-responsive imprinting10.1016/j.talo.2021.100072 ↗
24. Molecularly imprinted polymers10.1021/acs.chemrev.8b00171 ↗
25. Synthesis of molecularly imprinted photocatalysts containing low TiO2 loading: evaluation for the degradation of pharmaceuticals10.1016/j.jhazmat.2015.11.035 ↗
26. Unveiling the latest developments in molecularly imprinted photocatalysts: a state-of-the-art review10.3390/polym15204152 ↗
27. Molecularly imprinted photocatalysts: fabrication, application and challenges10.1039/D2MA00848C ↗
28. Enhanced photocatalytic activity of TiO2 powders (P25) via calcination treatment10.1155/2012/265760 ↗
29. What is Degussa (Evonic) P25? crystalline composition analysis, reconstruction from isolated pure particles and photocatalytic activity test10.1016/j.jphotochem.2010.07.024 ↗
30. Surface coating of titanium dioxide nanoparticles with a polymerizable chelating agent and its physicochemical property10.1021/acsomega.3c00734 ↗
31. Controlling silica coating thickness on TiO2 nanoparticles for effective photodynamic therapy10.1016/j.colsurfb.2013.02.007 ↗
32. Reporting physisorption data for gas/solid systems10.1351/pac198557040603 ↗
33. Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms10.1016/j.ijheatmasstransfer.2018.01.107 ↗
34. Surface structure and phase composition of TiO2 P25 particles after thermal treatments and HF etching10.3389/fmats.2020.00192 ↗
35. Multitarget evaluation of the photocatalytic activity of P25–SiO2 prepared by atomic layer deposition10.3390/catal10040450 ↗
36. Effect of surface area, pore volume and particle size of P25 titania on the phase transformation of anatase to rutile
37. Selective photodegradation of 2,4-D pesticide from water by molecularly imprinted TiO210.1016/j.jphotochem.2019.111872 ↗
38. Molecularly imprinted Fe3O4/g-C3N4/TiO2 catalyst for selective photodegradation of chlorotetracycline10.1016/j.colsurfa.2023.132691 ↗
39. A molecularly imprinted polymer based on TiO2 as a sacrificial support for selective recognition of dibenzothiophene10.1016/j.cej.2011.05.089 ↗
40. Interstitial N-doped TiO2 for photocatalytic methylene blue degradation under visible light irradiation10.3390/catal14100681 ↗
41. Preparation of ethylene glycol dimethacrylate (EGDMA)-based terpolymer as potential sorbents for pharmaceuticals adsorption10.3390/polym12020423 ↗
42. Synthesis and characterization of poly(HEMA-co-EGDMA-co-VBC) by modified suspension polymerization: effects of polymerization parameters reaction on chemical and thermal properties of polymer10.1016/j.matpr.2018.07.062 ↗
43. Radiation-grafting of ethylene glycol dimethacrylate (EGDMA) and glycidyl methacrylate (GMA) onto silicone rubber10.1016/j.radphyschem.2016.05.015 ↗
44. FTIR and XPS study of the reaction of phenyl isocyanate and cellulose with different moisture contents10.1108/03699420510620300 ↗
45. From trans to cis conformation: further understanding the surface properties of poly(m-phenylene isophthalamide)10.1021/acsomega.6b00527 ↗
46. Electrocatalytic oxygen reduction reaction by the Pd/Fe–N–C catalyst and application in a Zn–air battery10.3390/catal12121640 ↗
47. TiO2 by XPS10.1116/1.1247794 ↗
48. Structural characterization of solar cell prototypes based on nanocrystalline TiO2 anatase sensitized with Ru complexes: X-ray diffraction, XPS, and XAFS spectroscopy study10.1021/cm020123d ↗
49. Universal calibration of computationally predicted N 1s binding energies for interpretation of XPS experimental measurements10.1021/acs.langmuir.7b02301 ↗
50. Conjugated polymer modifying TiO2 performance for visible-light photodegradation of organics10.3390/polym15132805 ↗
51. Visible light absorption by various titanium dioxide specimens10.1021/jp064253b ↗
52. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV–Vis spectra10.1021/acs.jpclett.8b02892 ↗
53. Determination of thermodynamic parameters from Langmuir isotherm constant revisited10.1016/j.molliq.2016.11.058 ↗
54. Sorption–desorption behaviour of 2,4-dichlorophenol by marine sediments10.1016/S0045-6535(99)00214-3 ↗
55. Determination of soil–water sorption coefficients of volatile methylsiloxanes10.1002/etc.2640 ↗
56. Direct UV photolysis of propranolol and metronidazole in aqueous solution10.1016/j.cej.2009.12.017 ↗
57. Metronidazole degradation by UV and UV/H2O2 advanced oxidation processes: kinetics, mechanisms, and effects of natural water matrices10.3390/ijerph191912354 ↗
58. Preferential photodegradation of contaminants by molecular imprinting on titanium dioxide10.1016/j.apcatb.2009.12.024 ↗
59. Photocatalytic removal of metronidazole antibiotics from water using novel Ag-N-SnO2 nanohybrid material10.3390/toxics12010036 ↗
60. B–Sn/TiO2 nanoparticles for photodegradation of metronidazole antibiotics under different lights10.1016/j.matchemphys.2023.127937 ↗
61. Enhanced photocatalytic degradation of metronidazole by TiO2 decorated on magnetic reduced graphene oxide: characterization, optimization and reaction mechanism studies10.1016/j.molliq.2020.113608 ↗
62. Pollution of water resources and application of ICP-MS techniques for monitoring and management—a comprehensive review10.1016/j.geogeo.2023.100210 ↗
63. Removal of metronidazole by TiO2 and ZnO photocatalysis: a comprehensive comparison of process optimization and transformation products10.1007/s11356-018-2848-7 ↗
64. Development of magnetic imprinted PEDOT/CdS heterojunction photocatalytic nanoreactors: three-dimensional specific recognition for selectively photocatalyzing danofloxacin mesylate10.1016/j.apcatb.2019.118433 ↗
65. Highly efficient degradation of metronidazole drug using CaFe2O4/PNA nanohybrids as metal–organic catalysts under microwave irradiation10.1007/s11356-020-10694-3 ↗
66. Degradation of metronidazole by UV/chlorine treatment: efficiency, mechanism, pathways and DBPs formation10.1016/j.chemosphere.2019.02.081 ↗
67. Synthesis and application of stable, reusable TiO2 polymeric composites for photocatalytic removal of metronidazole: removal kinetics and density functional analysis10.1016/j.cej.2018.11.090 ↗