Ca/Zn-doping induces crystal structure optimization of Mn-phosphate chemical conversion coatings for enhancing osteogenic activity
Source abstract
Abstract
The construction of multifunctional phosphate coatings on metallic implants has been proven to possess remarkable potential in promoting bone regeneration. However, systematic investigations into element-doped manganese phosphate (MnP) coatings on titanium (Ti) remain scarce. In this study, phosphate chemical conversion (PCC) was employed to fabricate a series of MnP coatings by doping with varying concentrations of Calcium (Ca) and Zinc (Zn) ions. The results showed that the introduction of Ca 2+ and Zn 2+ effectively refined the MnP crystals and subsequently induced the transformation of the original prismatic crystal structure into unique layered and block-like micro/nano structures. Structural analysis indicated that Ca 2+ and Zn 2+ replaced Mn 2+ in the crystal lattice. Moreover, Mn 2+ could further replace Zn 2+ in zinc phosphate (ZnP), leading to the formation of manganese-zinc phosphate (MnZnP). The doped coatings exhibited high bonding strength, appropriate surface roughness, and improved wettability. In vitro biological evaluations demonstrated that the Ca and Zn-doped MnP coatings on Ti substrates showed superior cell adhesion, proliferation, and osteogenic differentiation compared to the MnP coating. This study provides a feasible strategy for surface functionalization of Ti-based implants and efficient repair of bone defects.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Advancement in smart bone implants: the latest multifunctional strategies and synergistic mechanisms for tissue repair and regeneration
2. The latest perspective on fabrication strategies of smart implants for bone tissue repair and regeneration
3. Effect of TiH2 intermediate on the structure and properties of TiO2 coating induced on titanium by induction heating and its multifunctional mechanism10.1016/j.apsusc.2020.147968 ↗
4. Zinc-doping induces evolution of biocompatible strontium–calcium-phosphate conversion coating on titanium to improve antibacterial property10.1021/acsami.1c23631 ↗
5. Microstructures of Ti6Al4V matrices induce structural evolution of bioactive surface oxide layers via cold compression and induction heating10.1016/j.apsusc.2021.149504 ↗
6. Osseointegration of three-dimensional designed titanium implants manufactured by selective laser melting10.1088/1758-5090/8/4/045014 ↗
7. Titanium-based alloys and composites for orthopedic implants applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
8. Construction of wogonin nanoparticle‐containing strontium‐doped nanoporous structure on titanium surface to promote osteoporosis fracture repair10.1002/adhm.202201405 ↗
9. Composite coatings formed on Ti by PEO and fluoropolymer treatment10.1016/j.apsusc.2020.147976 ↗
10. Preparation of zirconium hydrogen phosphate coatings on alkali thermal titanium via a one-step sol–gel method to improve the friction resistance, bioactivity, and osteogenic potential10.1016/j.apsusc.2024.161596 ↗
11. Preparation of micro/nano-fibrous brushite coating on titanium via chemical conversion for biomedical applications10.1016/j.apsusc.2016.12.100 ↗
12. Influence of pH value on microstructure and properties of strontium phosphate chemical conversion coatings on titanium10.3390/molecules28186651 ↗
13. Effect of reaction temperature on the microstructure and properties of magnesium phosphate chemical conversion coatings on titanium10.3390/molecules28114495 ↗
14. Bioactivity enhancement by Sr doped Zn-Ca-P coatings on biomedical magnesium alloy10.1016/j.jma.2019.05.014 ↗
15. Zn-doped CaP coating equips Ti implants with corrosion resistance, biomineralization, antibacterial and immunotolerant activities10.1016/j.jare.2025.01.045 ↗
16. Structural evolution of Sr-phosphate chemical conversion coatings induced by in-situ Ca doping to achieve efficient osteogenic activity10.1016/j.apsusc.2025.162591 ↗
17. Bioactive manganese-decorated titanium implants for osteoporotic bone regeneration
18. Manganese supplementation of orthopedic implants: a new strategy for enhancing integrin-mediated cellular responses10.1039/D2BM02165J ↗
19. Engineered manganese phosphate coatings on titanium implants: synergistic photothermal antibiosis and ion-stimulated osteogenesis via zinc/calcium co-doping10.1007/s12598-025-03639-7 ↗
20. Manganese-driven microstructural evolution of calcium zinc phosphate coatings on titanium for enhanced photothermal antibacterial and osteogenic performance10.1016/j.matdes.2026.115667 ↗
21. Bone-inspired porous nanotubes modified with bioactive ions for enhancing initial osteogenic and antibacterial properties of Ti-based implants10.1016/j.apsusc.2025.164250 ↗
22. Calcium–Zinc phosphate chemical conversion coating facilitates the osteointegration of biodegradable zinc alloy implants by orchestrating macrophage phenotype10.1002/adhm.202202537 ↗
23. The crystal structure of sergeysmirnovite, MgZn2(PO4)2·4H2O, and complexity of the hopeite group and related structures10.3390/cryst12081120 ↗
24. M.A. Gomez-Gonzalez, M.A. Koronfel, H. Pullin, J.E. Parker, P.D. Quinn, M.D. Inverno, T.B. Scott, F. Xie, N. Voulvoulis, M.L. Yallop, M.P. Ryan, A.E. Porter, Nanoscale Chemical Imaging of Nanoparticles under Real-World Wastewater Treatment Conditions, 5 (2021) 2100023.10.1002/adsu.202100023 ↗
25. Formation of Ca HPO4-2H2O from enamel mineral and its relationship to caries mechanism10.1177/00220345750540031001 ↗
26. Synthesis of hureaulite Mn5(H2O)4(PO3OH)2(PO4)2 with an open 3D network structure as electrode material for electrochemical capacitors10.3390/pr12081622 ↗
27. Synthesis of hureaulite by a reflux process at ambient temperature and pressure10.1016/j.micromeso.2011.11.057 ↗
28. Applications in Inorganic Chemistry, in: Infrared and Raman Spectra of Inorganic and Coordination Compounds, 2008, pp. 149-354.10.1002/9780470405840.ch2 ↗
29. Ellipsometry, FTIR, Raman and X-ray spectroscopy analysis of PECVD a-Si1-xCx:H film10.1080/00387010903348276 ↗
30. Electronegativity values from thermochemical data10.1016/0022-1902(61)80142-5 ↗
31. Unlocking the intercalation mechanism of blue phosphorene/MBene heterostructures for lithium/sodium-ion batteries: a first principles study10.1016/j.molliq.2024.125528 ↗
32. A modern view on the thermolisis of hydrate zinc-manganese(Ii) phosphates10.30890/2709-1783.2023-28-01-007 ↗
33. Effect of different galvanic coupling methods on the surface chemical transformation of TC4 titanium alloy10.1016/j.surfcoat.2024.130483 ↗
34. Synthetic hureaulite as anode material for lithium-ion batteries10.1007/s10800-022-01831-6 ↗
35. Construction of magnesium phosphate chemical conversion coatings with different microstructures on titanium to enhance osteogenesis and angiogenesis10.1021/acsami.4c03024 ↗
36. The dehydration of phosphates monitored by DSC/TGA and in situ Raman spectroscopy10.1016/S0040-6031(01)00582-2 ↗
37. Application of synthetic hureaulite as a new precursor for the synthesis of lithiophilite nanoparticles10.1016/j.solidstatesciences.2020.106469 ↗
38. Current views on calcium phosphate osteogenicity and the translation into effective bone regeneration strategies10.1016/j.actbio.2012.07.002 ↗
39. The effect of calcium ion concentration on osteoblast viability, proliferation and differentiation in monolayer and 3D culture10.1016/j.biomaterials.2005.01.006 ↗
40. Double-edged effects and mechanisms of Zn(2+) microenvironments on osteogenic activity of BMSCs: osteogenic differentiation or apoptosis10.1039/D0RA01465F ↗
41. Plasma spray of biofunctional (Mg, Sr)-substituted hydroxyapatite coatings for titanium alloy implants10.1016/j.jmst.2018.10.020 ↗
42. Alternative to surface sulfonation: biofunctionalizing PEEK surfaces via 3D porous coatings using the nonsolvent-induced phase separation approach10.1016/j.cej.2025.164025 ↗
43. Adhesion and cohesion of epoxy-based industrial composite coatings10.1016/j.compositesb.2020.108035 ↗
44. In-situ construction of the nanostructured TiO2/TiN composite films by induction heat treatment: improved mechanical, corrosion, and biological properties10.1016/j.apsusc.2022.156300 ↗
45. Enhanced mechanical, antibacterial, and osteogenic performance of zinc-doped micro-nano porous layer on Ti6Al4V: Realized by ion exchange and induction heating10.1016/j.surfcoat.2025.131763 ↗
46. Evaluation of nanoscale versus hybrid micro/nano surface topographies for endosseous implants10.1016/j.actbio.2023.10.030 ↗
47. Titanium surface characteristics, including topography and wettability, alter macrophage activation10.1016/j.actbio.2015.12.003 ↗
48. Enhanced SaOS-2 cell adhesion, proliferation and differentiation on Mg-incorporated micro/nano-topographical TiO2 coatings10.1016/j.apsusc.2018.04.095 ↗
49. S. Cai, C. Wu, W. Yang, W. Liang, H. Yu, L. Liu, Recent advance in surface modification for regulating cell adhesion and behaviors, 9 (2020) 971-989.10.1515/ntrev-2020-0076 ↗
50. Fundamental theory of biodegradable metals—definition, criteria, and design
51. Construction of a magnesium hydroxide/graphene oxide/hydroxyapatite composite coating on Mg–Ca–Zn–Ag alloy to inhibit bacterial infection and promote bone regeneration
52. Biomimetic surface nanoengineering of biodegradable Zn‐based orthopedic implants for enhanced biocompatibility and immunomodulation10.1002/adfm.202410033 ↗
53. Angiogenic and immunomodulation role of ions for initial stages of bone tissue regeneration10.1016/j.actbio.2023.06.001 ↗
54. Bioactive elements manipulate bone regeneration
55. Advanced microstructural study of solution precursor plasma sprayed Zn doped hydroxyapatite coatings10.1016/j.jeurceramsoc.2017.12.037 ↗
56. Site-specific antibacterial efficacy and cyto/hemo-compatibility of zinc substituted hydroxyapatite10.1016/j.ceramint.2019.03.132 ↗