Atmosphere-dependent hydrogenation of TiO2 nanotubes synthesized via one- and two-step anodization for enhanced photoelectrochemical performance
Source abstract
Abstract
• TSA-H shows only 4% photocurrent decay after prolonged UV illumination. • Two-step anodized TiO 2 nanotubes exhibit superior photocurrent stability. • Defect engineering in pure H 2 boosts donor density to 3.51 × 10 22 cm −3 . • PEC performance is more sensitive to H 2 atmosphere than anodization method. • XPS confirms highest oxygen vacancies in TSA-H, enhancing charge transport. This study investigates the influence of hydrogenation atmosphere on the physicochemical and photoelectrochemical (PEC) properties of TiO 2 nanotube arrays fabricated via one-step (OSA) and two-step anodization (TSA). After anodization, samples were thermally hydrogenated at 500 °C under pure H 2 , H 2 /N 2 (10%/90%), and H 2 /Ar (10%/90%) atmospheres. All samples retained the anatase phase with highly ordered nanotubular morphology. X-ray photoelectron spectroscopy revealed varying oxygen vacancy (O Vs ) concentrations, highest under pure H 2 . UV–Vis and PL analyses confirmed band gap narrowing due to defect-induced mid-gap states. PEC measurements showed enhanced photocurrent densities of 477 µA/cm 2 (OSA-H) and 475 µA/cm 2 (TSA-H) at 1.23 V vs. RHE, with photoconversion efficiencies up to 3.01%. Electrochemical impedance spectroscopy and Mott–Schottky analysis indicated reduced charge transfer resistance and elevated donor density (N d ), with TSA-H reaching 3.51 × 10 22 cm −3 . Despite similar photocurrent outputs, TSA-H exhibited superior stability with only 4% decay, nearly 2.5 × lower than OSA-H. These findings demonstrate that while both the anodization strategy and the hydrogenation atmosphere affect performance, the latter plays a more dominant role in defect modulation and PEC enhancement, with pure H 2 treatment yielding the most conductive and stable TiO 2 photoanodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Anodic Oxide Films and Nanostructures · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Environmental impact and pollution-related challenges of renewable wind energy paradigm–a review10.1016/j.scitotenv.2019.05.274 ↗
2. Electrical engineering in renewable energy systems: a review of design and integration challenges10.51594/estj.v5i1.746 ↗
3. Recent advances and perspective of modified TiO2-based photoanodes toward photoelectrochemical water splitting10.1016/j.fuel.2024.132366 ↗
4. Energy consumption, technological innovation, and economic growth in BRICS: a GMM panel VAR framework analysis
5. Membrane technology for energy saving: principles, techniques, applications, challenges, and prospects10.1002/aesr.202400011 ↗
6. Habitable planet to sustainable civilization: global climate change with related clean energy transition reliant on declining critical metal resources10.1016/j.gr.2024.01.013 ↗
7. Deep eutectic electrodeposition for energy storage and conversion systems. A comprehensive review10.1016/j.ijhydene.2024.05.065 ↗
8. Green hydrogen energy production: current status and potential10.1093/ce/zkae012 ↗
9. A comprehensive review of AI-enhanced smart grid integration for hydrogen energy: advances, challenges, and future prospects10.1016/j.ijhydene.2024.01.129 ↗
10. A review of hydrogen production and storage materials for efficient integrated hydrogen energy systems10.1002/ese3.1723 ↗
11. Investigating and predicting the role of photovoltaic, wind, and hydrogen energies in sustainable global energy evolution10.1016/j.gloei.2024.08.009 ↗
12. From fossil fuel energy to hydrogen energy: transformation of fossil fuel energy economies into hydrogen economies through social entrepreneurship10.1016/j.ijhydene.2023.06.123 ↗
13. Environmental performance of a hybrid solar-hydrogen energy system for buildings10.1016/j.ijhydene.2023.07.208 ↗
14. Hydrogen production technologies: from fossil fuels toward renewable sources. A mini review10.1021/acs.energyfuels.1c02501 ↗
15. Hydrogen from sunlight and water: a side-by-side comparison between photoelectrochemical and solar thermochemical water-splitting10.1021/acsenergylett.1c00758 ↗
16. Effective use of geothermal energy for hydrogen production: a comprehensive application10.1016/j.energy.2022.123597 ↗
17. The hydrogen economy-where is the water?10.1016/j.nexus.2022.100123 ↗
18. Advances of nanostructured metal oxide as photoanode in photoelectrochemical (PEC) water splitting application
19. Exploring progress in binary and ternary nanocomposites for photoelectrochemical water splitting: A comprehensive review10.1016/j.ccr.2024.216180 ↗
20. Photoelectrochemical water splitting with engineering aspects for hydrogen production: recent advances, strategies and challenges10.1016/j.ijhydene.2024.05.039 ↗
21. Novel gamma-ray enhanced TiO2 nanoparticles photoanode for efficient photoelectrochemical (PEC) water splitting
22. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
23. The route for commercial photoelectrochemical water splitting: a review of large-area devices and key upscaling challenges10.1039/D1CS01069G ↗
24. Developing new understanding of photoelectrochemical water splitting via in-situ techniques: a review on recent progress, Green
25. Recent developments on the application of photoelectrochemical processes for sustainable water treatment
26. Titanium dioxide: from engineering to applications10.3390/catal9020191 ↗
27. Titanium dioxide-based nanomaterials for photocatalytic fuel generations10.1021/cr500008u ↗
28. Titanium dioxide nanostructures as efficient photocatalyst: progress, challenges and perspective10.1002/er.6079 ↗
29. N. Tsvetkov, L. Larina, J. Ku Kang, N. Shevaleevskiy, Sol-gel processed TiO2 nanotube photoelectrodes for dye-sensitized solar cells with enhanced photovoltaic performance, Nanomaterials 10 (2020) 296, Doi: 10.3390/nano10020296.10.3390/nano10020296 ↗
30. Pollutant template method synthesis of oxygen vacancy and template cavity riched TB-TiO2@MFA towards selective photodegradation of ciprofloxacin10.1016/j.apsusc.2021.151027 ↗
31. Microwave assisted construction of Ag-AgBr/reduced TiO2 nano-tube arrays photoelectrode and its enhanced visible light photocatalytic performance for degradation of 4-chlorphenol10.1016/j.seppur.2017.10.068 ↗
32. Fabrication and characterization of superhydrophobic TiO2 nanotube coating by a facile anodic oxidation approach10.1016/j.surfcoat.2018.09.014 ↗
33. Surface tuning for oxide-based nanomaterials as efficient photocatalysts10.1039/c3cs60176e ↗
34. WO3-based photocatalysts: morphology control, activity enhancement and multifunctional applications10.1039/C6EN00478D ↗
35. Surface modification of 2D photocatalysts for solar energy conversion10.1002/adma.202200180 ↗
36. Significant enhancement in visible light absorption of TiO2 nanotube arrays by surface band gap tuning10.1021/jp405207e ↗
37. TiO2 nanotubes architectures for solar energy conversion10.3390/coatings11080931 ↗
38. Electrochemical hydrogenation of mixed-phase TiO2 nanotube arrays enables remarkably enhanced photoelectrochemical water splitting performance10.1016/j.scib.2017.12.023 ↗
39. E. Khorashadizade, K. Rahimi, S. Mohajernia, S. Hejazi, N. Naseri, O. Moradlou, A.Z. Moshfegh, P. Schmuki, Comparing plasma reduction and thermal hydrogenation of TiO2 nanotubes in creating surface/bulk oxygen vacancy defects for enhanced photoelectrochemical H2 production, SSRN (2023), https://dx.doi.org/10.2139/ssrn.4570075.10.2139/ssrn.4570075 ↗
40. Interfaces, The influence of hydrothermal treatment on TiO2 nanostructure films transformed from titanates and their photoelectrochemical water splitting properties
41. Effective transformation of hydrothermally grown TiO2 nanorods to nanotube arrays for improved PEC hydrogen evolution10.1016/j.electacta.2023.143391 ↗
42. Effective hydrogenation of TiO2 photocatalysts with CH3OH for enhanced water splitting: a computational and X-ray study10.1016/j.apsusc.2019.05.239 ↗
43. Fe3+-doped anatase TiO2 with d–d transition, oxygen vacancies and Ti3+ centers: synthesis, characterization, UV–vis photocatalytic and mechanistic studies10.1021/acs.iecr.6b01104 ↗
44. γ-ray induced formation of oxygen vacancies and Ti3+ defects in anatase TiO2 for efficient photocatalytic organic pollutant degradation10.1016/j.scitotenv.2020.141533 ↗
45. Structure and formation mechanism of black TiO2 nanoparticles10.1021/acsnano.5b04712 ↗
46. Oxygen vacancies in piezo-photocatalysts: synthesis, characterization, effect mechanism and application10.1039/D5CP00616C ↗
47. Synthesis and growth mechanism of graded TiO2 nanotube arrays by two-step anodization10.1016/j.mseb.2007.12.006 ↗
48. Black TiO2 nanotubes: cocatalyst-free open-circuit hydrogen generation10.1021/nl500710j ↗
49. Formation of oxygen vacancies and Ti3+ state in TiO2 thin film and enhanced optical properties by air plasma treatment10.1038/srep32355 ↗
50. The enhancement of photocatalytic hydrogen production via Ti3+ self-doping black TiO2/g-C3N4 hollow core-shell nano-heterojunction10.1016/j.apcatb.2018.09.079 ↗
51. Enhanced photocatalytic performance of TiO2 with tunable oxygen vacancies induced by H2/N2 mixture treatment10.1016/j.solidstatesciences.2024.107726 ↗
52. Nitrogen doping mediated oxygen vacancy and Ti valence regulation to enhance photocatalytic H2 generation10.1016/j.ijhydene.2023.03.344 ↗
53. Two-dimensional ultrathin MoS2-modified black Ti3+–TiO2 nanotubes for enhanced photocatalytic water splitting hydrogen production10.1016/j.jechem.2019.08.020 ↗
54. Enhanced photoelectrochemical water splitting via hydrogenated TiO2 nanotubes modified with Cu/CuO species10.1016/j.jphotochem.2024.115586 ↗
55. Optimizing low-temperature defect engineering in TiO2 nanosheets for enhanced photocatalytic water splitting10.1016/j.apsusc.2025.164793 ↗
56. Tuning oxygen vacancy content in TiO2 nanoparticles to enhance the photocatalytic performance10.1016/j.ces.2021.116440 ↗
57. Remarkable improvement of photoelectrochemical water splitting in pristine and black anodic TiO2 nanotubes by enhancing microstructural ordering and uniformity10.1016/j.ijhydene.2022.07.158 ↗