journal article·2026-06Open access

Spatially resolved quantitative surface characterization of grafted Ni catalysts inside nanochannels of anodic alumina membranes

Patrick Rupper, Sayan Basak, Edith Perret, Rudolf Hufenus, Manfred Heuberger

Abstract

• Nickel catalyst surface functionalization of an anodic aluminum oxide membrane. • XPS quantitative assessing Ni single atom catalyst distribution inside nanochannels. • Full monolayer surface coverage of 0.73 molecules/nm 2 from geometrical constraints. • Catalyst density gradient along the nanopores with decreased amount in the center. • Promising nanoscale reactors for low-branched polyethylene polymerization. Anodic aluminum oxide (AAO) mesoporous membranes functionalized with α-diimine Ni(II) complexes were recently considered as nanoscale chemical reactors for confined-space polymerization of ultra-high molecular weight, low-branched polyethylene. One of the factors regulating the structure–property relationship of the polymer is the spatial distribution of Ni single-atom catalysts present inside the membrane’s nanochannels. The grafting of the Ni complex inside the nanochannels occurs via the functional linker trimethylaluminum. Here, we employ X-ray photoelectron spectroscopy (XPS) to investigate and quantify both the distribution and absolute surface concentrations of the catalyst inside and along the nanochannels across the membrane. Up to 0.6 catalyst molecules/nm 2 have been detected in the middle of the nanochannels. This value corresponds to approximately 80% of the maximal monolayer surface coverage of 0.73 catalyst molecules/nm 2 found outside the pores, i.e. on the flat membrane surface. This work not only demonstrates that it is possible to graft functional catalysts inside the confined space of nanochannels, but it also quantifies their surface concentrations. This quantitative mapping establishes a critical foundation for the design of nanochannel reactors with tailored catalyst distributions. We found catalyst density gradients along the nanopores that could be useful to vary the density of polymerization sites along these nanochannels
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Nanopore and Nanochannel Transport Studies · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Extrusion polymerization: catalyzed synthesis of crystalline linear polyethylene nanofibers within a mesoporous silica10.1126/science.285.5436.2113 ↗
2. Perspectives: polymer chemistry - nanoscale polymerization reactors for polymer fibers10.1126/science.285.5436.2081 ↗
3. Controlling polyethylene branching via surface confinement of Ni complexes10.1016/j.jcat.2023.07.019 ↗
4. Advances in through-hole anodic aluminum oxide (AAO) membrane and its applications: a review10.3390/nano15211665 ↗
5. Heterogenization strategies for nickel catalyzed synthesis of polyolefins and composites10.1021/accountsmr.2c00263 ↗
6. Efficient slurry-phase homopolymerization of ethylene to branched polyethylenes using α-diimine nickel(II) catalysts covalently linked to silica supports10.1021/ma061032v ↗
7. Surface organometallic and coordination chemistry toward single-site heterogeneous catalysts: strategies, methods, structures, and activities10.1021/acs.chemrev.5b00373 ↗
8. Preparation of a well-defined silica-supported nickel-diimine alkyl complex - application for the gas-phase polymerization of ethylene10.1021/om800582x ↗
9. Deep core level hard X-ray photoelectron spectroscopy for catalyst characterization10.1002/sia.7267 ↗
10. Surface control of Ni-Al2O3 dry reforming of methane catalyst by composition segregation10.1016/j.jcou.2024.102721 ↗
11. Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation10.1038/s41598-024-73848-0 ↗
12. A study on the effect of pH value of impregnation solution in nickel catalyst preparation for methane dry reforming reaction10.1002/slct.201901910 ↗
13. Structured Ni catalysts on porous anodic alumina membranes for methane dry reforming: NiAl2O4 formation and characterization10.1039/C5CC03173G ↗
14. Ambient catalytic spinning of polyethylene nanofibers
15. A step-by-step guide to perform x-ray photoelectron spectroscopy
16. Study of the self-assembling of n-octylphosphonic acid layers on aluminum oxide10.1021/la801978a ↗
17. XPS study of the assembling morphology of 3-hydroxy-3-phosphono-butiric acid tert-butyl ester on variously pretreated Al surfaces10.1016/j.porgcoat.2007.11.007 ↗
18. The chemisorption of organophosphorus compounds at an Al(111) surface10.1016/S0169-4332(01)00404-4 ↗
19. Quantification of activated single-site olefin polymerization catalysts on a solid support10.1021/acs.organomet.5b00804 ↗
20. Density profile of water in nanoslit10.1209/0295-5075/99/26001 ↗
21. X-ray reflectivity theory for determining the density profile of a liquid under nanometre confinement10.1107/S0909049510014858 ↗
22. Bio-inspired track-etched polymeric nanochannels: steady-state biosensors for detection of analytes10.1021/acsnano.1c08582 ↗
23. Silica nanochannels as nanoreactors for the confined synthesis of Ag NPs to boost electrochemical stripping chemiluminescence of the Luminol-O2 system for the sensitive aptasensor10.1021/acs.analchem.4c01033 ↗
24. Gating of responsive multiple nanochannels by ultra-low concentration of saccharides10.1039/C4CC09723H ↗
25. Nanochannels formed on TiZr alloy improve biological response10.1016/j.actbio.2015.06.016 ↗
26. An H2S-regulated artificial nanochannel fabricated by a supramolecular coordination strategy10.1021/acs.jpclett.2c02233 ↗
27. Efficient chiral nanosenor based on tip-modified nanochannels10.1021/acs.analchem.0c05390 ↗
28. Chiral covalent organic framework packed nanochannel membrane for enantioseparation
29. Switchable biomimetic nanochannels for on-demand SO2 detection by light-controlled photochromism10.1038/s41467-023-37654-y ↗
30. “Bound but not gagged” - immobilizing single-site α-olefin polymerization catalysts10.1021/cr040670d ↗
31. Recent advances on α-diimine Ni and Pd complexes for catalyzed ethylene (Co)polymerization: a comprehensive review10.1016/j.ccr.2022.214844 ↗
32. Fluorine and hydroxyl containing unsymmetrical α-diimine Ni (II) dichlorides with improved catalytic performance for ethylene polymerization10.1016/j.eurpolymj.2023.111830 ↗
33. Accessing the robustness of adventitious carbon for charge referencing (correction) purposes in XPS analysis: Insights from a multi-user facility data review10.1016/j.apsusc.2022.153681 ↗
34. Beamson · 1992
35. The utility of adventitious carbon for charge correction: a perspective from a second multiuser facility10.1002/sia.7360 ↗
36. Binding energy referencing in X-ray photoelectron spectroscopy: expanded data set confirms that adventitious carbon aligns to the sample vacuum level10.1016/j.apsusc.2024.160666 ↗
37. XPS guide: charge neutralization and binding energy referencing for insulating samples10.1116/6.0000057 ↗
38. Introduction to studies of aluminum and its compounds by XPS10.1116/1.1247880 ↗
39. Moulder · 1995
40. Detection limits in XPS for more than 6000 binary systems using Al and Mg Ka X-rays10.1002/sia.5406 ↗
41. An X-ray photoelectron spectroscopic study of the interaction of oxygen and nitric oxide with aluminum10.1098/rspa.1978.0175 ↗
42. ESCA study of fractional monolayer quantities of chemisorbed gases on tungsten10.1016/0009-2614(73)85132-2 ↗
43. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487eV10.1016/0368-2048(76)80015-1 ↗
45. Calculations of electron inelastic mean free paths. 3. Data for 15 inorganic compounds over the 50-2000 eV range10.1002/sia.740171305 ↗
46. Calculations of electron inelastic mean free paths. 5. Data for 14 organic compounds over the 50-2000 eV range10.1002/sia.740210302 ↗
47. Evaluation of procedures for overlayer thickness determination from XPS intensities10.1016/j.susc.2019.05.004 ↗
48. Surface characterization of untreated and hydro-thermally pre-treated Turkey oak woods after UV-C irradiation10.1002/sia.5689 ↗
49. Quantification of oxide film thickness at the surface of aluminium using XPS10.1002/sia.1344 ↗
50. Misconceptions in interpretation of nitrogen chemistry from x-ray photoelectron spectra10.1116/1.5135923 ↗
51. The role of the Auger parameter in XPS studies of nickel metal, halides and oxides10.1039/c2cp22419d ↗
52. Study of nickel-carbon bonding by x-ray photoelectron spectroscopy10.1016/S0020-1693(00)89404-9 ↗