Activity, selectivity and regeneration of copper molybdate as a catalyst for the hydrodeoxygenation under flow conditions
Source abstract
Abstract
Chemical processing of biomass derived feedstocks is one of the main vectors for the sustainable production of chemicals and fuels. Hydrodeoxygenation of oxygenated bio-based intermediates using molecular hydrogen is particularly attractive to sustainably produce aromatics and fuels. Herein we investigated catalytic performance of CuMoO4, benchmarked to MoO3 and NiMoO4 catalysts, in the hydrodeoxygenation of anisole under flow conditions, focusing on activation / re-activation cycles. Present results indicated a superior activity of the CuMoO4 phase and more importantly higher product selectivity to oxygen-free aromatics associated with limited activity toward the hydrogen-assisted decomposition of aromatic rings to methane. The regeneration experiments depicted a decisive role of an oxidative step followed directly by an additional reductive step to bring the catalyst to its highest catalytic activity again after on stream deactivation. Based on a multitude of surface/bulk-sensitive characterizations including in situ X-ray diffraction, Raman and X-ray photoelectron spectroscopy measurements, supported by thermal analysis of fresh and spent catalysts, it can be concluded, that the highest activity is correlated with the formation of a molybdenum oxycarbohydride phase which is promoted by Cu. Surface segregation of Cu species and build-up of surface carbon can be correlated to deactivation which can be reverted by the oxidative treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysis for Biomass Conversion · Catalysis and Hydrodesulfurization Studies · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Intergovernmental Panel on Climate Change (IPCC), Climate Change 2021 – The Physical Science Basis: Working Group I Contribution to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge University Press, Cambridge, 2023.10.1017/9781009157896 ↗
2. The catalytic valorization of lignin for the production of renewable chemicals10.1021/cr900354u ↗
3. Benzenoid aromatics from renewable resources10.1021/acs.chemrev.4c00087 ↗
4. Co-ordination network for lignin—standardisation, production and applications adapted to market requirements (EUROLIGNIN)10.1016/j.indcrop.2004.04.015 ↗
5. Challenges in industrial applications of technical lignins10.15376/biores.6.3.3547-3568 ↗
6. Mass production of chemicals from biomass-derived oil by directly atmospheric distillation coupled with co-pyrolysis10.1038/srep01120 ↗
7. A review of catalytic upgrading of bio-oil to engine fuels10.1016/j.apcata.2011.08.046 ↗
8. Synergistic effects of Ru and Fe on titania-supported catalyst for enhanced anisole hydrodeoxygenation selectivity10.1016/j.cattod.2017.08.025 ↗
9. Catalytic hydrodeoxygenation of lignin-derived oxygenates: catalysis, mechanism, and effect of process conditions10.1021/acs.energyfuels.1c02640 ↗
10. Enhancement of hydrodeoxygenation catalytic performance through the addition of copper to molybdenum oxide-based catalysts
11. Catalytic hydropyrolysis of biomass using molybdenum sulfide based catalyst. Effect of promoters10.1021/acs.energyfuels.8b04191 ↗
12. Effect of hydrogen sulphide on the hydrodeoxygenation of aromatic and aliphatic oxygenates on sulphided catalysts10.1016/j.molcata.2007.07.033 ↗
13. Reactions of methyl heptanoate hydrodeoxygenation on sulphided catalysts10.1016/j.molcata.2006.12.006 ↗
14. Influence of H2O and H2S on the composition, activity, and stability of sulfided Mo, CoMo, and NiMo supported on MgAl2O4 for hydrodeoxygenation of ethylene glycol10.1016/j.apcata.2017.12.008 ↗
15. Deoxygenation mechanisms on Ni-promoted MoS2 bulk catalysts: a combined experimental and theoretical study10.1016/j.jcat.2011.10.022 ↗
16. Gas-phase catalytic hydrodeoxygenation of phenolic compounds derived from lignin pyrolysis for hydrocarbon production using Ni@HZSM-5-γ-Al2O310.1016/j.jaap.2022.105626 ↗
17. Designing supported ZnNi catalysts for the removal of oxygen from bio-liquids and aromatics from diesel10.1039/c2gc35901d ↗
18. Hydrodeoxygenation of fast-pyrolysis bio-oils from various feedstocks using carbon-supported catalysts10.1016/j.fuproc.2014.01.039 ↗
19. Evidence of dependence between the deoxygenation activity and metal–support interface10.1039/D2CY00969B ↗
20. Catalytic upgrading of biomass model compounds: novel approaches and lessons learnt from traditional hydrodeoxygenation – a review10.1002/cctc.201801722 ↗
21. Deoxygenation of m-cresol on Pt/γ-Al2O3 catalysts10.1016/j.cattod.2013.04.011 ↗
22. Mechanism of hydrodeoxygenation of acrolein on a cluster model of MoO310.1021/jp104421a ↗
23. Effect of the support on the hydrodeoxygenation of m -cresol over molybdenum oxide based catalysts10.1016/j.apcatb.2017.05.003 ↗
24. Insights into the catalytic activity and surface modification of MoO3 during the hydrodeoxygenation of lignin-derived model compounds into aromatic hydrocarbons under low hydrogen pressures10.1039/C4EE00890A ↗
25. Operando NAP-XPS unveils differences in MoO3 and Mo2C during hydrodeoxygenation10.1038/s41929-018-0171-9 ↗
26. Metal/metal‐oxide interfaces: how metal contacts affect the work function and band structure of MoO310.1002/adfm.201200993 ↗
27. Learning from the past: are catalyst design principles transferrable between hydrodesulfurization and deoxygenation?10.1002/aic.16151 ↗
28. The temperature-programmed desorption of hydrogen from copper surfaces10.1023/A:1019076722708 ↗
29. Hydrogen-deuterium exchange on copper, silver, gold and alloy surfaces10.1021/ja01643a067 ↗
30. Molecular beam study of the apparent activation barrier associated with adsorption and desorption of hydrogen on copper10.1016/0039-6028(74)90315-X ↗
31. Absorption of hydrogen in copper10.1039/ft9959103659 ↗
32. In Situ 1H NMR investigation of hydrogen adsorption on a Cu/MgO catalyst10.1021/jp9715484 ↗
33. Hydrogen adsorption and desorption from Cu(111) and Cu(211)10.1039/C8CP03386B ↗
34. Steric effect and evolution of surface species in the hydrodeoxygenation of bio-oil model compounds over Pt/HBEA10.1021/acscatal.5b02684 ↗
35. Gas-phase hydrodeoxygenation of benzaldehyde, benzyl alcohol, phenyl acetate, and anisole over precious metal catalysts10.1021/acs.iecr.6b00036 ↗
36. BTX from anisole by hydrodeoxygenation and transalkylation at ambient pressure with zeolite catalysts10.1016/j.fuel.2018.01.033 ↗
37. Anisole hydrodeoxygenation over Ni-Co bimetallic catalyst: a combination of experimental, kinetic and DFT study10.1039/D2RA05136B ↗
38. Selective vapor-phase hydrodeoxygenation of anisole to benzene on molybdenum carbide catalysts10.1016/j.jcat.2014.07.025 ↗
39. Chemical titration and transient kinetic studies of site requirements in Mo2C-catalyzed vapor phase anisole hydrodeoxygenation10.1021/acscatal.5b00713 ↗
40. Ordered mesoporous metal carbides with enhanced anisole hydrodeoxygenation selectivity10.1021/acscatal.6b00303 ↗
41. Bifunctional molybdenum polyoxometalates for the combined hydrodeoxygenation and alkylation of lignin-derived model phenolics10.1002/cssc.201700297 ↗
42. Catalytic hydrodeoxygenation of anisole over Re-MoOx /TiO2 and Re-VOx /TiO2 catalysts10.1016/j.apcatb.2017.02.047 ↗
43. A study of the hydrodeoxygenation of anisole over Re-MoOx/TiO2 catalyst10.1016/j.apcata.2017.10.009 ↗
44. Effect of composition and preparation of supported MoO3 catalysts for anisole hydrodeoxygenation10.1016/j.cej.2017.10.090 ↗
45. Hydrodeoxygenation of lignin-derived phenolic compounds into aromatic hydrocarbons under low hydrogen pressure using molybdenum oxide as catalyst10.1016/j.cattod.2018.03.068 ↗
46. Valorization of biomass derivatives through the conversion of phenol over silica-supported Mo-Re oxide catalysts10.1016/j.fuel.2019.116245 ↗
47. Investigation of catalytic hydrodeoxygenation of anisole as bio‐oil model compound over Ni‐Mo/TiO2 and Ni‐V/TiO2 catalysts: synthesis, kinetic, and reaction pathways studies10.1002/cjce.23912 ↗
48. V.K. Pecharsky, P.Y. Zavalij, Fundamentals of powder diffraction and structural characterization of materials, 2nd ed., Springer Science & Business Media, New York, 2009.
49. T. Narayanan, Small‐Angle Scattering, in: D.W. Bruce, D. O'Hare, R.I. Walton (Eds.) Structure from Diffraction Methods, John Wiley & Sons, West Sussex, 2014, pp. 259-324.10.1002/9781118695708.ch5 ↗
50. Investigations into the influence of nickel loading on MoO3-modified catalysts for the gas-phase hydrodeoxygenation of anisole10.1039/D3CY01488F ↗
51. Calculation of flame ionization detector relative response factors using the effective carbon number concept10.1093/chromsci/23.8.333 ↗
52. Self-alkylation of anisole over acid medium-pore zeolites
53. D.L. Stern, S.H. Brown, J.S. Beck, Isomerization and Transalkylation of Alkylaromatics, in: G. Ertl, H. Knözinger, F. Schüth, J. Weitkamp (Eds.) Handbook of Heterogeneous Catalysis, Wiley-VCH, Weinheim, 2008, pp. 3168-3194.10.1002/9783527610044.hetcat0160 ↗
54. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
55. Direct observation of Ni–Mo bimetallic catalyst formation via thermal reduction of nickel molybdate nanorods10.1021/acscatal.0c02264 ↗
56. Carbon dynamics on the molybdenum carbide surface during catalytic propane dehydrogenation10.1002/chem.201302420 ↗
57. ESCA studies of copper oxides and copper molybdates10.1016/0022-4596(78)90105-6 ↗
58. In situ TPO, TPD and XRD characterisation of a molybdenum oxycarbohydride catalyst for n-butane isomerisation10.1016/S0926-860X(01)00532-4 ↗
59. Calculation of inelastic mean free path of photoelectrons in some solids10.1016/0368-2048(88)80024-0 ↗
60. Quantitative electron spectroscopy of surfaces: a standard data base for electron inelastic mean free paths in solids10.1002/sia.740010103 ↗
61. Charge transfer in transition metal carbides and related compounds studied by ESCA10.1016/0022-3697(69)90252-2 ↗
62. Reactivity and stability investigation of supported molybdenum oxide catalysts for the hydrodeoxygenation (HDO) of m-cresol10.1016/j.jcat.2015.07.034 ↗
63. Raman spectroscopy of molybdenum oxides10.1039/b107012f ↗
64. Investigation into the synthesis conditions of CuMoO4 by an in situ method and its photocatalytic properties under visible light irradiation10.1039/D0RA00496K ↗
65. Far-infrared spectroscopic investigations on CuO10.1103/PhysRevB.42.10060 ↗
66. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and raman and infrared spectroscopy10.1021/jp303096m ↗
67. Raman spectroscopy of molybdenum oxides10.1039/b107046k ↗
68. Growth and characterization of Cu2O and CuO thin films10.1007/s10854-022-08506-0 ↗
69. Resonance raman studies in Cu2O. I. the phonon-assisted 1s yellow excitonic absorption edge10.1103/PhysRevB.12.1377 ↗
70. First order raman spectrum of Cu2O10.1016/0038-1098(69)90768-6 ↗
71. In Situ raman spectroscopy of anodic films formed on copper and silver in sodium hydroxide solution10.1149/1.2108666 ↗
72. A review on corrosion protection with single-layer, multilayer, and composites of graphene10.1515/corrrev-2017-0016 ↗
73. On the role of hydrogen during the reduction–carburation of MoO3 into molybdenum oxycarbide10.1016/S1381-1169(00)00300-9 ↗
74. Identification of preferentially exposed crystal facets by X-ray diffraction10.1039/D0RA00769B ↗
75. In situ X‐ray analysis of MoO3 reduction10.1002/crat.200410312 ↗
76. High-temperature X-ray diffraction and thermal expansion of nanocrystalline and coarse-crystalline acanthite alpha-Ag2S and argentite beta-Ag2S10.1039/C5CP07224G ↗
77. Microstructure and characterization of a highly selective catalyst for the isomerization of alkanes: a molybdenum oxycarbide10.1006/jcat.1999.2741 ↗
78. Vapor pressure of pure substances. organic and inorganic compounds10.1021/ie50448a022 ↗
79. The vaporization of molybdenum and tungsten oxides10.1021/j150565a001 ↗
80. The reduction of copper oxide by hydrogen10.1021/ja01443a007 ↗
81. Processes of adsorption and diffusion on solid surfaces10.1039/tf9322800333 ↗
82. Hydrogen activation on copper catalytic sites in stereoselective alkyne hydrogenation10.1007/BF02066953 ↗
83. Structural properties and reactivity trends of molybdenum oxide catalysts supported on zirconia for the hydrodeoxygenation of anisole10.1021/acssuschemeng.7b00642 ↗
84. Enhanced brønsted acidity and hydrogenating sites generated on MoO3 during acetone hydrodeoxygenation10.1002/cctc.202300663 ↗
85. Physical characterization of molybdenum oxycarbide catalyst; TEM, XRD and XPS10.1016/0920-5861(94)00166-Y ↗