journal article·2026-06Open access

Room-temperature synthesis of Pd cores and CO-assisted Pt monolayer growth for durable oxygen reduction reaction electrocatalysts

Jiye Choi, Dongchul Park, Eunjik Lee, DohHoon Lee, Yongmin Kwon, EunAe Cho, Gu-Gon Park

Abstract

• Room-temperature polyol synthesis yields uniform 3–4 nm Pd nanoparticles. • Facile synthesis is scalable up to 5 g while maintaining uniform Pd dispersion. • CO-adsorption-induced deposition enables conformal Pt monolayer growth on Pd cores. • Pd@Pt/C exhibits a 2.9-fold higher ORR mass activity than commercial Pt/C. • Electrochemical tests confirm superior durability of Pd@Pt/C after AST 30 k cycles. Durable and cost-effective electrocatalysts are essential for advancing polymer electrolyte fuel cells (PEFCs) in next-generation energy systems. This study presents a facile room-temperature synthesis of uniformly dispersed Pd nanoparticles on carbon supports, followed by Pt monolayer (ML) deposition via a CO-adsorption-induced deposition (CO-AID) method to form Pd@Pt/C core–shell catalysts. Diethylene glycol (DEG) was identified as the optimal polyol solvent, enabling the direct synthesis of 3–4 nm Pd nanoparticles at room temperature, in contrast to the temperatures of over 160 °C typically required for polyol reduction. Structural characterization confirmed the successful formation of a Pt monolayer shell on Pd cores. Electrochemical measurements further revealed a mass activity of 0.649 m 2 g −1 Pt for the oxygen reduction reaction (ORR), representing a substantial improvement over the 0.226 m 2 g −1 Pt observed for commercial Pt/C. After accelerated stress test (AST) 30 k cycles, Pd@Pt/C retained its core–shell structure and exhibited only a minor mass activity loss of 6.5%, whereas Pt/C underwent severe degradation with a 41.2% loss. Single-cell evaluations further validated these findings, with Pd@Pt/C maintaining higher cell activity and superior long-term durability under PEFC operations. These results highlight the potential of Pd@Pt/C as a scalable and robust alternative to conventional Pt/C catalysts for practical PEFC applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
2. Recent development in design a state-of-art proton exchange membrane fuel cell from stack to system: theory, integration and prospective10.1016/j.ijhydene.2022.11.212 ↗
3. Recent progress of electrocatalysts for oxygen reduction in fuel cells10.1016/j.jcis.2021.09.008 ↗
4. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
5. Developing long-durability proton-exchange membrane fuel cells10.1016/j.joule.2025.101853 ↗
6. Proton exchange membrane fuel cell stack durability prediction using Arrhenius-bassed accelerated degradation model10.3390/app15031300 ↗
7. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
8. Durability of platinum-based fuel cell electrocatalysts: dissolution of bulk and nanoscale platinum10.1016/j.nanoen.2016.03.005 ↗
9. Density functional theory-based design of a Pt-skinned PtNi catalyst for the oxygen reduction reaction in fuel cells10.1016/j.apsusc.2021.150518 ↗
10. Facile synthesis of Pd-Pt alloy nanocages and their enhanced performance for preferential oxidation of CO in excess hydrogen10.1021/nn202896q ↗
11. Oxygen reduction on well-defined core-shell nanocatalysts: particle size, facet, and Pt shell thickness effects10.1021/ja9067645 ↗
12. Pd-Pt bimetallic nanodendrites with high activity for oxygen reduction10.1126/science.1170377 ↗
13. CO adsorption-induced deposition: a facile and precise synthesis route for core-shell catalysts10.1021/acsnano.5c16647 ↗
14. Effect of palladium core size on the activity and durability of Pt-monolayer electrocatalysts for oxygen reduction reaction10.1016/j.apsusc.2025.162477 ↗
15. Pd@Pt core-shell nanostructures for improved electrocatalytic activity in methanol oxidation reaction10.1016/j.apcatb.2015.05.029 ↗
16. Strategic synthesis of trimetallic Au@Pd@Pt core-shell nanoparticles from poly(vinylpyrrolidone)-based aqueous solution toward highly active electrocatalysts10.1021/cm200382s ↗
17. Investigation of polymer electrolyte membrane chemical degradation and degradation mitigation using in situ fluorescence spectroscopy10.1073/pnas.1114672109 ↗
18. A review of proton exchange membrane degradation pathways, mechanisms, and mitigation strategies in a fuel cell10.3390/en17050998 ↗
19. Chemical degradation of ionomer in the electrodes of proton exchange membrane fuel cells10.1016/j.jpowsour.2025.238160 ↗
20. Dynamic stability of Pt-based alloys for fuel-cell catalysts calculated from atomistics10.1039/D4CY00463A ↗
21. Advances and directions of ordered Pt-based transition metal alloys supported on carbon with different dimensions for boosting ORR catalytic activity toward PEMFCs
22. Regulating orbital interaction to construct quasi-covalent bond networks in Pt intermetallic alloys for high-performance fuel cells10.1038/s41467-025-60171-z ↗
23. Analysis of the palladium market: a strategic aspect of sustainable development10.3390/mining5030039 ↗
24. Synthesis methods and applications of palladium nanoparticles: a review, Nanotechnol10.3389/fnano.2022.1062608 ↗
25. Green synthesis of Pd nanoparticles for sustainable and environmentally benign processes10.3390/catal11111258 ↗
26. Fast and real-time observation of hydrogen absorption kinetics for palladium nanoparticles10.1016/j.jallcom.2010.10.094 ↗
27. Hydrogen adsorption on palladium: a comparative theoretical study of different surfaces10.1016/S0039-6028(98)00354-9 ↗
28. Understanding the role of oxidative etching in the polyol synthesis of Pd nanoparticles with uniform shape and size10.1021/ja0513741 ↗
29. Microwave-assisted synthesis of palladium nanocubes and nanobars10.1016/j.materresbull.2009.09.028 ↗
30. A facile diethylene glycol reduction method for the synthesis of ultrafine Pd/C electrocatalyst with high electrocatalytic activity for methanol oxidation10.1002/fuce.201600143 ↗
31. The optical properties of metal nanoparticles: the influence of size, shape, and dielectric environment10.1021/jp026731y ↗
32. Comparative study of palladium(II) complexes bearing tridentate ONS and NNS Schiff base ligands: synthesis, characterization
33. Homogeneous Pd nanoparticles produced in direct reactions: green synthesis, formation mechanism and catalysis properties10.1039/C3TA14299J ↗
34. Viscosity and density measurements of poly(ethyleneglycol) 200 and poly(ethyleneglycol) 600 at high pressures10.1021/acs.jced.2c00578 ↗
35. Viscosity and thermal conductivity of MgO-EG nanofluids10.1007/s10973-017-6130-x ↗
36. Viscosity of liquid diethylene, triethylene and tetraethylene glycols at moderately high pressures using a vibrating wire instrument
37. Operando study of Pd(100) surface during CO oxidation using ambient pressure x-ray photoemission spectroscopy10.1063/1.5081066 ↗
38. Quantitative Z-contrast imaging in the scanning transmission electron microscope with size-selected clusters
39. Recent advances in platinum monolayer electrocatalysts for oxygen reduction reaction: scale-up synthesis, structure and activity of Pt shells on Pd cores10.1016/j.electacta.2009.11.106 ↗