The dual role of trace Cu in the corrosion mechanism of Zn4Al alloy: Insights from microstructural characterization and electrochemical performance
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Comparison of the sliding wear of a novel Zn alloy with that of two commercial Zn alloys against bearing steel and leaded brass10.1016/j.wear.2016.10.017 ↗
2. Multi-objective optimization of LPBF manufacturing with Zn-4Al-1Cu alloy for technical applications10.1016/j.jmapro.2024.12.049 ↗
3. Efficient Zn-Alloyed Low-Toxicity Quasi-Two-Dimensional Pure-Red Perovskite Light-Emitting Diodes10.1021/acsami.1c16242 ↗
4. Process gas-assisted surface modifications on Zn-Mg-Al alloy-coatings using atmospheric pressure plasma for improved adhesion to structural adhesives10.1016/j.jmatprotec.2025.118950 ↗
5. Corrosion of galvanized steel in alkaline solution associated with sulfate and chloride ions10.1016/j.conbuildmat.2023.131889 ↗
6. Effect of melt overheating treatment on the microstructure and mechanical properties of Zn-Al alloy10.1016/j.vacuum.2022.111071 ↗
7. Influence of Different Al Contents on Microstructure, Tensile and Wear Properties of Zn-based Alloy10.1016/S1005-0302(10)60100-4 ↗
8. Zn-Mg and Zn-Cu alloys for stenting applications: from nanoscale mechanical characterization to in vitro degradation and biocompatibility
9. Microstructure refinement, mechanical performances and degradability of biomedical Zn-2Cu alloy by ultrasonic melting and homogenization treatment
10. Bulk diffusion regulated nanopore formation during vapor phase dealloying of a Zn-Cu alloy10.1016/j.actamat.2022.118210 ↗
11. Investigation on the microstructure, mechanical performances, in vitro degradation behavior and biocompatibility of biodegradable Zn-0.5Sr alloy by Li alloying and extruded deformation10.1016/j.matchemphys.2025.130664 ↗
12. Synergistic effects of Sr alloying and hot rolling-induced bimodal microstructure on the performance of Zn-0.45Li-xSr biodegradable alloys10.1016/j.jallcom.2025.184378 ↗
13. Fatigue and corrosion fatigue behaviors of biodegradable Zn-Li and Zn-Cu-Li under physiological conditions10.1016/j.jmst.2022.04.051 ↗
14. Study on the microstructure and corrosion resistance of Zn-3Al-xMg alloy10.1016/j.surfcoat.2023.130011 ↗
15. Improvement of high strain rate and room temperature superplasticity in Zn-22Al alloy by two-step equal-channel angular pressing10.1016/j.msea.2014.09.114 ↗
16. In-situ observation of the growth behavior of ZnAl layered double hydroxide film using EQCM10.1016/j.matdes.2019.107952 ↗
17. Model of anodized layers formation in Zn-Al (Zamak) aiming to corrosion resistance10.1016/j.jmrt.2021.03.027 ↗
18. Influence of Nd addition on the corrosion behavior of Zn-5%Al alloy in 3.5wt.% NaCl solution10.1016/j.apsusc.2017.07.109 ↗
19. Effect of Ti addition on microstructure and mechanical properties of Zn-22Al alloy after ECAP10.1007/s11771-024-5615-6 ↗
20. Effect of Ni on the microstructure and properties of ZX01 zinc-aluminum alloy10.1016/j.jallcom.2025.184446 ↗
21. Novel machine learning driven design strategy for high strength Zn Alloys optimization with multiple constraints10.1038/s41524-025-01666-7 ↗
22. In vitro degradation behavior of novel Zn-Cu-Li alloys: Roles of alloy composition and rolling processing10.1016/j.matdes.2021.110288 ↗
23. Design biodegradable Zn alloys: second phases and their significant influences on alloy properties
24. A peritectic phase refines the microstructure and enhances Zn implants10.1016/j.jmrt.2020.04.037 ↗
25. Effect of Cu alloying to ZA-24 alloy to corrosion properties in 2.5% NaCl solution10.1088/2053-1591/addba7 ↗
26. Novel Biodegradable Zn Alloy with Exceptional Mechanical and In Vitro Corrosion Properties for Biomedical applications10.1021/acsbiomaterials.1c00763 ↗
27. Effect of Cu addition on microstructure and corrosion behavior of spray-deposited Zn-30Al alloy10.1016/j.msea.2011.10.069 ↗
28. In situ study of dew point corrosion by electrochemical measurement10.1016/j.corsci.2013.03.001 ↗
29. Using wavelets transform in the analysis of electrochemical noise data10.1016/S0013-4686(99)00222-4 ↗
30. The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel10.1016/j.corsci.2008.11.015 ↗
31. Electrochemical noise analysis of cavitation erosion corrosion resistance of NbC nanocrystalline coating in a 3.5 wt% NaCl solution10.1016/j.surfcoat.2021.127133 ↗
32. Electrochemical noise and impedance study on the corrosion of electroplated Ni-Cr coatings in HBF4 aqueous solution10.1016/j.jelechem.2020.113838 ↗
33. Measures for the detection of localized corrosion with electrochemical noise10.1016/S0013-4686(01)00645-4 ↗
34. A practical evaluation of electrochemical noise parameters as indicators of corrosion type10.1016/j.electacta.2004.01.040 ↗
35. Electrochemical noise analysis on the pit corrosion susceptibility of biodegradable AZ31 magnesium alloy in four types of simulated body solutions10.1016/j.jmst.2018.01.015 ↗
36. Electrochemical noise analysis of corrosion sensitivity of Pb-free solders in 5 wt% citric acid solution10.1007/s42114-024-00856-z ↗
37. Analysis of electrochemical noise obtained from pure aluminium in neutral chloride and alkaline solutions10.1016/j.corsci.2006.05.018 ↗
38. Effects of cavitation erosion-induced surface damage on the corrosion behaviour of TA31 Ti alloy10.1016/j.ultsonch.2023.106498 ↗
39. Electrochemical noise analysis on the pit corrosion susceptibility of Mg-10Gd-2Y-0.5Zr, AZ91D alloy and pure magnesium using stochastic model10.1016/j.corsci.2008.09.033 ↗
40. Determining the probability of stable pit initiation on aluminium alloys using potentiostatic electrochemical measurements10.1016/j.corsci.2004.09.021 ↗
41. Study of the corrosion behaviour of sensitized 904L austenitic stainless steel in Cl- solution10.1016/j.corsci.2020.109234 ↗
42. Improving corrosion resistance of Zn-5Al (wt%) alloy by microalloying with samarium10.1016/j.jre.2022.09.002 ↗
43. Oxygen reduction mechanism on corroded zinc10.1016/j.jelechem.2005.08.007 ↗
44. The kinetics and mechanism of cathodic oxygen reduction on zinc and zinc-aluminium alloy galvanized coatings10.1016/j.corsci.2005.05.036 ↗
45. The anodic dissolution of zinc and zinc alloys in alkaline solution. II. Al and Zn partial dissolution from 5% Al-Zn coatings10.1016/j.electacta.2012.04.037 ↗
46. Influence of Al contents on the long-term corrosion behaviors of cold-sprayed Zn-xAl coatings10.1016/j.surfcoat.2023.130201 ↗
47. Electrochemical corrosion behaviour and corrosion mechanism of Sn-9Zn-xGe solder alloys in NaCl solution10.1016/j.corsci.2023.111809 ↗
48. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
49. The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn-Ca-Cu alloys for absorbable wound closure device applications
50. Investigation on microstructures, mechanical properties and in vitro corrosion behavior of novel biodegradable Zn-2Cu-0.01Ti-xLi alloys
51. Microstructural evolution, mechanical properties and corrosion mechanisms of additively manufactured biodegradable Zn-Cu alloys10.1016/j.jmst.2023.10.052 ↗
52. Effects of cooling rate on the microstructure and properties of hot-dipped Zn-Al-Mg coatings10.1016/j.surfcoat.2022.128665 ↗
53. A hot-dip self-passive zinc alloy coating to inhibit the galvanic corrosion of a Mg alloy10.1016/j.corsci.2025.113111 ↗
54. Technical note: concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
55. Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy10.1016/j.matchar.2021.111439 ↗
56. Evaluation of inhibitive action of some quaternary N-heterocyclic compounds on the corrosion of Al-Cu alloy in hydrochloric acid10.1016/j.matchemphys.2008.09.065 ↗
57. Corrosion product formation on Zn55Al coated steel upon exposure in a marine atmosphere10.1016/j.corsci.2010.11.004 ↗
58. The effect of ZnAl-LDHs-CO3 on the corrosion behaviour of Zn-5Al alloys in 3.5wt.% NaCl solution10.1016/j.corsci.2020.109165 ↗
59. Corrosion mode evaluation of Fe-based glassy alloys with metalloid elements by electrochemical noise (EN)10.1016/j.apsusc.2023.158826 ↗
60. Electrochemical noise analysis of the corrosion of AZ91D magnesium alloy in alkaline chloride solution10.1016/j.electacta.2007.07.014 ↗
61. Effect of surface damage induced by cavitation erosion on pitting and passive behaviors of 304L stainless steel10.1007/s12613-023-2602-0 ↗
62. Study on the corrosion behavior of reinforcing steel in cement mortar by electrochemical noise measurements10.1016/j.electacta.2006.11.015 ↗
63. Understanding the Corrosion Behavior of Nickel-Aluminum Bronze Induced by Cavitation Corrosion using Electrochemical Noise: Selective phase Corrosion and Uniform Corrosion
64. Wavelet transform-based analysis for electrochemical noise10.1016/S1388-2481(99)00053-3 ↗
65. Shot noise and statistical parameters for the estimation of corrosion mechanisms10.1016/j.corsci.2005.05.047 ↗
66. Corrosion resistance of zinc-magnesium coated steel10.1016/j.corsci.2007.03.032 ↗
67. Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process10.1016/j.jmst.2020.05.024 ↗
68. Revealing the evolution of microstructure, mechanical property and corrosion behavior of 7A46 aluminum alloy with different ageing treatment10.1016/j.jallcom.2019.03.324 ↗