journal article·2026-06Open access

Hybrid femtosecond laser and ion-implantation processing for controlled, deep, high-efficiency ablation in fused silica

Mario Garcia-Lechuga, Yoann Levy, Irene Solana, Fátima Cabello, María Dolores Ynsa, Nadezhda M. Bulgakova

Abstract

• A hybrid process for the surface modification of fused silica has been demonstrated, combining prior MeV Au-ion implantation with subsequent femtosecond laser irradiation. • Single-shot irradiation of Au-implanted samples produces, independently of the laser fluence, sharply defined cylindrical craters with flat bottoms with 550 nm depth. • The preferential energy absorption induced by the implanted Au layer enables efficient material removal at moderate peak laser fluence, achieving ablation efficiencies up 15 µm 3 /µJ. • A simple cylindrical-crater model accurately predicts the experimental ablation efficiency, providing a guideline for optimizing laser processing and predicting crater shape and efficiency based on the Au-implantation depth. Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser–matter interactions where the local fluence determines the processing depth, often limiting control over feature geometry and efficiency. Here, we present a hybrid approach combining localized Au implantation (1.8 MeV Au 2+ ions) into SiO 2 samples with femtosecond laser irradiation (250 fs), effectively tuning the laser–matter interaction and resulting morphology. At both 515 nm and 1030 nm irradiation wavelengths, single-shot femtosecond pulses produce cylindrical craters with sharp edges and flat-bottom profiles. Independently of the fluence, these craters exhibit a constant depth of 550 nm, corresponding to the region of maximum Au concentration. The effect manifests already at moderate fluence (∼4 J/cm 2 ) and yields high ablation efficiency, up to 15 µm 3 /µJ. The hybrid method also works effectively at lower implantation doses that preserve the excellent transmission of fused silica, offering a promising pathway for the high-quality fabrication of flat optical components such as binary phase masks, phase lenses, or fused-silica micromolds.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Nonlinear Optical Materials Studies · Laser-Ablation Synthesis of Nanoparticles

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Fused silica as an optical material [Invited]10.1364/OME.463349 ↗
2. Micro-shaping, polishing, and damage repair of fused silica surfaces using focused infrared laser beams10.1002/adem.201400349 ↗
3. Investigation on laser beam figuring of fused silica using microsecond pulsed CO2 laser radiation10.1016/j.apsusc.2021.149609 ↗
4. One-stop direct laser writing of fused silica convex microlens arrays with high filling factor10.1016/j.apsusc.2025.164270 ↗
5. Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass10.1038/s41377-020-0250-y ↗
6. Fabrication of single-mode circular optofluidic waveguides in fused silica using femtosecond laser microfabrication10.1016/j.optlastec.2021.107118 ↗
7. 3D printing of silica glass through a multiphoton polymerization process10.1364/OL.414848 ↗
8. Three-dimensional printing of silica glass with sub-micrometer resolution
9. Excimer laser ablation of fused silica10.1016/0169-4332(92)90043-W ↗
10. Nanosecond-to-femtosecond laser-induced breakdown in dielectrics10.1103/PhysRevB.53.1749 ↗
11. M. Lenzner, J. Krüger, W. Kautek, F. Krausz, Precision laser ablation of dielectrics in the 10-fs regime, 1999.10.1007/s003390050906 ↗
12. Wavelength dependence of femtosecond laser-induced damage threshold of optical materials10.1063/1.4922353 ↗
13. Wavelength-independent performance of femtosecond laser dielectric ablation spanning over three octaves10.1103/PhysRevApplied.19.044047 ↗
14. Enhanced ablation efficiency using GHz bursts in micromachining fused silica10.1364/OL.415959 ↗
15. Advances in femtosecond laser GHz-burst drilling of glasses: influence of burst shape and duration
16. Modeling ultrashort-pulse laser ablation of dielectric materials10.1103/PhysRevB.79.155424 ↗
17. Direct correlation of local fluence to single-pulse ultrashort laser ablated morphology10.1038/s43246-021-00138-x ↗
18. Control of material removal of fused silica with single pulses of few optical cycles to sub-picosecond duration10.1007/s00339-011-6469-y ↗
19. Ultrashort pulse laser ablation of dielectrics: thresholds, mechanisms, role of breakdown10.1038/srep39133 ↗
20. Energy transport and material removal in wide bandgap materials by a femtosecond laser pulse10.1016/j.ijheatmasstransfer.2004.09.016 ↗
21. Spatio-temporal dynamics in nondiffractive Bessel ultrafast laser nanoscale volume structuring10.1002/lpor.201500112 ↗
22. Ablation profile prediction of hard brittle fused silica optics irradiated by single-pulse femtosecond laser10.1016/j.apsusc.2025.162319 ↗
23. T. Rublack, G. Seifert, Femtosecond laser delamination of thin transparent layers from semiconducting substrates [Invited], 2011. DOI: 10.1364/OA_License_v1#VOR.10.1364/OME.1.000543 ↗
24. Physical mechanisms during fs laser ablation of thin SiO2 films10.1016/j.phpro.2013.03.141 ↗
25. Quantized structuring of transparent films with femtosecond laser interference10.1038/lsa.2014.38 ↗
26. Ultrafast laser‐induced plasmonic modulation of optical properties of dielectrics at high resolution
27. Optoplasmonic tuneable response by femtosecond laser irradiation of glass with deep-implanted gold nanoparticles
28. Current status and future developments of the ion beam facility at the centre of micro-analysis of materials in Madrid10.1140/epjp/s13360-021-01085-9 ↗
29. Improved physics in SIMNRA 710.1016/j.nimb.2014.02.056 ↗
30. Simple technique for measurements of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
31. Dual-wavelength femtosecond laser-induced single-shot damage and ablation of silicon10.1016/j.apsusc.2023.158626 ↗
32. Thermal and fluid processes of a thin melt zone during femtosecond laser ablation of glass: the formation of rims by single laser pulses10.1088/0022-3727/40/5/021 ↗
33. Melt front propagation in dielectrics upon femtosecond laser irradiation: formation dynamics of a heat-affected layer10.1063/1.4948262 ↗
34. Microscopic mechanisms of ablation and micromachining of dielectrics by using femtosecond lasers10.1063/1.1583857 ↗
35. Refractive index profiles induced by ion implantation into silica10.1088/0022-3727/9/9/011 ↗
36. Thermal annealing of femtosecond laser written structures in silica glass10.1364/OME.3.000502 ↗
37. Refractive-index changes in fused silica produced by heavy-ion implantation followed by photobleaching10.1364/OL.17.001652 ↗
38. Influence of thermal annealing and radiation enhanced diffusion processes on surface plasmon resonance of gold implanted dielectric matrices
39. Interstitial oxygen related defects and nanovoids in Au implanted a -SiO 2 glass depth profiled by positron annihilation spectroscopy10.1088/0022-3727/48/49/495302 ↗
40. Laser-irradiation-driven formation of oxygen-related defects and performance degradation in fused silica with nanosecond pulsed laser at 355 nm10.1016/j.optlastec.2018.09.007 ↗
41. Formation of Au colloid particles in silica glass by ion implantation10.1557/PROC-235-389 ↗
42. Ultrashort-pulse-laser ablation of freestanding dielectric thin films10.1007/s00339-024-07792-1 ↗
43. UV-ultrashort pulsed laser ablation of fused silica10.2351/7.0001197 ↗
44. Study on laser ablation of glass using MHz-to-GHz burst pulses10.1007/s00339-022-05776-7 ↗
45. Deterministic processing of alumina with ultrashort laser pulses10.1063/1.2794376 ↗
46. Improved prediction of ultrashort pulse laser ablation efficiency10.1016/j.optlastec.2025.113103 ↗