Manufacturing of physically unclonable fluorescent markings by in-mould functionalization (IMF): particle coating, adhesion properties and interphase formation
Source abstract
Abstract
• In-mould functionalization creates unique markings for anti-counterfeiting. • Coatings can improve the particle adhesion, reducing loss to few percent. • Chemical bonding through amide/urea formation ensures marking robustness. • Random particle patterns form physically unclonable functions (PUFs) • Successful transfer from mould to plastic parts via injection moulding. Unique and unclonable fluorescent particle-based markings enable the individualization of parts for track and trace applications and benefit from a more robust optical detection when compared with markerless techniques. The marking of surfaces by coating methods however requires additional fabrication steps and limits scalability. We therefore investigate a modified in-mould coating process to alleviate these drawbacks for injection moulded parts. Fluorescent particles are thereby incorporated into the surfaces of the parts by spraying them first into the mould and transferring them then permanently onto the parts surface by overmoulding so that no separate processing step for the application of a marking is needed. However, while the ability of the particles to transfer and adhere to the parts surface is considered a key factor for the usability and robustness of a marking, the highly dynamic wall temperatures and the cooling of the melt make adhesion a non-trivial task and expose a significant knowledge gap. The adhesion of the particles was therefore analysed to reveal the principal adhesion mechanisms and to investigate tailored organic particle coatings to improve adhesion. We identified mechanical interlocking and interfacial chemical reactions as key adhesion mechanisms. Peel tests showed that particle adhesion improves significantly when modifying the fluorescent particles with a polymeric multilayer shell using covalent layer-by-layer (LbL) assembly of polyethyleneimine and polyethylene-alt-maleic acid (up to four layers). Amide formation within the polymeric shell contributes to a high shell stability and establishes covalent links between the particles and the plastic part. The analysis of the interfacial reactions disclosed the formation of urethane and urea groups in case of polycarbonate. It was demonstrated that a second fluorescent particle type with identical excitation wavelength but different emission wavelength increases the information depth of product markings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Physical Unclonable Functions (PUFs) and Hardware Security · Effects and risks of endocrine disrupting chemicals · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. PUF-based authentication-oriented architecture for identification tags10.1109/TDSC.2024.3387568 ↗
2. W. Braumandl, „Verfahren zur sicheren registrierung und prüfung einer echtheit eines verpackten produkts“, WO2022229015A1, 3. November 2022 Zugegriffen: 4. Dezember 2025. [Online]. Verfügbar unter: https://patents.google.com/patent/WO2022229015A1/en?inventor=Walter+Braumandl&sort=new.
3. Physical one-way functions
4. A systematic method to evaluate and compare the performance of physical unclonable functions
5. J. W. Leem u. a., „Edible unclonable functions“, Nat. Commun. 11 1 1, 2020, doi: 10.1038/s41467-019-14066-5.10.1038/s41467-019-14066-5 ↗
6. „wt Werkstattstechnik online“, wt Werkstattstechnik online, Bd. 113, Nr. 113, Okt. 2023, doi: 10.37544/1436-4980-2023-10.10.37544/1436-4980-2023-10 ↗
7. Physical unclonable functions generated through chemical methods for anti-counterfeiting10.1038/s41570-017-0031 ↗
8. Particles with an identity: Tracking and tracing in commodity products10.1016/j.powtec.2015.12.035 ↗
9. Single part tracking enabled by fluorescent polysecure tracing particles in Am Parts
10. Anti-counterfeiting application of persistent luminescence materials and its research progress
11. Review on emerging technologies in pharmaceutical packaging: from anti-counterfeiting to green solutions
12. F. Civelek, „From surface to signature: vision-based identification of plastic parts via fluorescent particle patterns“, in 2025 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), Aug. 2025, S. 1–9. doi: 10.1109/ACDSA65407.2025.11166165.10.1109/ACDSA65407.2025.11166165 ↗
13. F. Civelek, „From Surface to Signature: Vision-Based Identification of Plastic Parts via Fluorescent Particle Patterns“, in 2025 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), Aug. 2025, S. 1–9. doi: 10.1109/ACDSA65407.2025.11166165.10.1109/ACDSA65407.2025.11166165 ↗
14. Versatile and Validated optical authentication system based on physical unclonable functions10.1021/acsami.8b17403 ↗
15. Illuminating advances in materials: optical physical unclonable functions for security applications
16. Marking of electrode sheets in the production of lithium-ion cells as an enabler for tracking and tracing10.1016/j.procir.2021.11.170 ↗
17. Fast image matching based on fourier-mellin phase correlation for tag-less identification of mass-produced parts
18. J. Lindenblatt, J. Schneider, A. Sommer, und R. Daub, „Image-matching in electrode production of lithium-ion batteries for marker-free tracking and tracing applications“, Future Batteries, Bd. 5, S. 100049, Feb. 2025, doi: 10.1016/j.fub.2025.100049.10.1016/j.fub.2025.100049 ↗
19. Marker-free traceability in battery production from continuous electrode foils to cell-specific individual electrode segments
20. Immobilisation of different surface-modified silica nanoparticles on polymer surfaces via melt processing10.1016/j.colsurfa.2017.05.016 ↗
21. Temperature transitions on the surface of a thermoplastic melt during injection moulding and its use for chemical reactions10.1016/j.ijheatmasstransfer.2012.06.096 ↗
22. Synthesis and Rapid Characterization of Amine-Functionalized Silica10.1021/la204981b ↗
23. Covalent layer-by-layer assembly —an effective, forgiving way to construct functional robust ultrathin films and nanocomposites10.1039/B810852H ↗
24. Accelerated Amidization of Branched Poly(ethylenimine)/Poly(acrylic acid) Multilayer Films by Microwave heating10.1021/acs.langmuir.6b02051 ↗
25. Multilayers Containing a Weak Polyacid: Construction and Deconstruction“10.1021/ma001720t ↗
26. S. Hofmann, Auger- and X-Ray Photoelectron Spectroscopy in Materials Science: A User-Oriented Guide, Bd. 49. in Springer Series in Surface Sciences, vol. 49. Berlin, Heidelberg: Springer, 2013. doi: 10.1007/978-3-642-27381-0.10.1007/978-3-642-27381-0 ↗
27. Beamson · 2012
28. F. Camara u. a., „Reactivity of secondary amines for the synthesis of non-isocyanate polyurethanes“, European Polymer Journal, Bd. 55, S. 17–26, Juni 2014, doi: 10.1016/j.eurpolymj.2014.03.011.10.1016/j.eurpolymj.2014.03.011 ↗
29. Characterization of polyethylenimine by electrospray ionization and matrix-assisted laser desorption/ionization10.1002/jms.1964 ↗
30. Vickerman · 2001