Effect of copper introduction via wet-impregnation on the performance of Mg-Al mixed metal oxides in selective ammonia oxidation
Source abstract
Abstract
This study investigates catalytic efficiency of Cu-impregnated Mg-Al hydrotalcite-derived mixed metal oxides as selective ammonia oxidation (NH 3 -SCO) catalysts. Copper was introduced via wet impregnation method onto calcined Mg-Al oxides followed by recalcination at 600 and 800 °C. Cu loading was in range 5–15 wt% to determine the loading effect. Obtained materials were characterized by several techniques (X-ray diffraction, low temperature nitrogen physisorption or temperature programmed reduction) and tested as catalysts of NH 3 -SCO. The study revealed that catalytic activity and selectivity are significantly influenced by copper loading and its surface accessibility rather than calcination temperature. Obtained results highlighted crucial role of dispersed, non-isolated, CuO species in selective and efficient NH 3 oxidation. The formation of bulk-like species led to unselective oxidation and formation of side products, while presence of isolated CuO species lowers the activity. The characterisation results together with catalytic tests show that enhancing copper accessibility and reducibility on the materials surface result in better catalytic efficiency. The materials impregnation allows greater surface exposure of active copper species compared to materials where Cu was introduced during parent hydrotalcite co-precipitation. Results suggest that use of well-developed surface area support allow copper loading increase without formation of undesired bulk-like species.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Ammonia Synthesis and Nitrogen Reduction · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. European Environment Agency, National Emission reduction commitments Directive reporting ststus 2022. https://www.eea.europa.eu/publications/national-emission-reduction-commitments-directive-2022 (2022).
2. Anhydrous ammonia burns case report and review of the literature10.1016/S0305-4179(99)00176-X ↗
3. Advances in selective catalytic oxidation of ammonia (NH3-SCO) to dinitrogen in excess oxygen: a review on typical catalysts, catalytic performances and reaction mechanisms10.1016/j.jece.2020.104575 ↗
4. Ammonia in the atmosphere: a review on emission sources, atmospheric chemistry and deposition on terrestrial bodies10.1007/s11356-013-2051-9 ↗
5. NH3 emissions from large point sources derived from CrIS and IASI satellite observations10.5194/acp-19-12261-2019 ↗
6. Study on the ammonia emission characteristics in an ammonia-based WFGD system10.1016/j.cej.2019.122257 ↗
7. Adsorption, absorption and biological degradation of ammonia in different biofilter organic media10.1002/bit.21246 ↗
8. Comparison of sorbents and isotherm models for NH3‐gas separation by adsorption10.1002/aic.690460807 ↗
9. Catalytic oxidation of ammonia over cerium-modified copper aluminium zinc mixed oxide10.3390/ma14216581 ↗
10. Copper based catalysts for the selective ammonia oxidation into nitrogen and water vapour—recent trends and open challenges10.1016/j.apcatb.2015.07.017 ↗
11. Ammonia pyrolysis and oxidation in the Claus furnace10.1021/ie990764r ↗
12. The effect of SO2 on NH3-SCO and SCR properties over Cu/SCR catalyst10.1016/j.apsusc.2019.145153 ↗
13. Advances in selective catalytic oxidation of ammonia to dinitrogen: a review10.1039/C5RA03218K ↗
14. Characterization and performance of Pt-Pd-Rh cordierite monolith catalyst for selectivity catalytic oxidation of ammonia10.1016/j.jhazmat.2010.04.070 ↗
15. Removal of gaseous ammonia in Pt-Rh binary catalytic oxidation10.4209/aaqr.2012.01.0015 ↗
16. Cordierite-supported Pt-Pd-Rh ternary composite for selective catalytic oxidation of ammonia10.1016/j.powtec.2010.02.014 ↗
17. Selective catalytic oxidation of ammonia to nitrogen on CuO-CeO2 bimetallic oxide catalysts
18. Progress on selective catalytic ammonia oxidation (NH3-SCO) over Cu−containing zeolite-based catalysts10.1002/cctc.202000649 ↗
19. Selective catalytic oxidation of ammonia to nitrogen at low temperature on Pt/CuO/Al2O310.1016/j.jcat.2004.11.023 ↗
20. Fabrication of hierarchically porous RuO2-CuO/Al-ZrO2 composite as highly efficient catalyst for ammonia-selective catalytic oxidation10.1021/cs500421x ↗
21. Role of the Cu content and Ce activating effect on catalytic performance of Cu-Mg-Al and Ce/Cu-Mg-Al oxides in ammonia selective catalytic oxidation10.1016/j.apsusc.2021.151540 ↗
22. Cu-Mg-Fe-O-(Ce) complex oxides as catalysts of selective catalytic oxidation of ammonia to dinitrogen (NH3-SCO)10.3390/catal10020153 ↗
23. Advances in selective catalytic oxidation of ammonia (NH3–SCO) to dinitrogen in excess oxygen: a review on typical catalysts, catalytic performances and reaction mechanisms10.1016/j.jece.2020.104575 ↗
24. The catalytic oxidation of ammonia: influence of water and sulfur on selectivity to nitrogen over promoted copper oxide/alumina catalysts10.1016/S0920-5861(99)00238-2 ↗
25. Selective catalytic oxidation of ammonia to nitrogen over Mg-Al, Cu-Mg-Al and Fe-Mg-Al mixed metal oxides doped with noble metals10.1016/j.apcatb.2012.11.004 ↗
26. Revealing the origin of high N2 selectivity in NH3 oxidation over copper-based acid catalysts via solid precursors surface modulation10.1016/j.jhazmat.2025.139363 ↗
27. Tuning the selectivity of NH3 oxidation via cooperative electronic interactions between platinum and copper sites
28. Selective catalytic oxidation (SCO) of ammonia to nitrogen over hydrotalcite originated Mg-Cu-Fe mixed metal oxides10.1007/s10562-011-0653-8 ↗
29. Effect of (M = Co, Cu, Cr, and Mo) M/CeO2-MgO catalysts in selective catalytic reduction of NOx with hydrogen under excess oxygen condition10.1016/j.jece.2023.111159 ↗
30. Characterization and catalytic functionalities of copper oxide catalysts supported on zirconia10.1021/jp063335x ↗
31. A review of preparation methods for supported metal catalysts10.1016/bs.acat.2017.10.001 ↗
32. Recent developments in the synthesis of supported catalysts10.1021/cr500486u ↗
33. Comparison of Cu-Mg-Al-Ox and Cu/Al2O3 in selective catalytic oxidation of ammonia (NH3-SCO)10.1016/j.catcom.2018.03.003 ↗
34. Structure and surface and catalytic properties of Mg-Al basic oxides10.1006/jcat.1998.2161 ↗
35. Hydrotalcite-type anionic clays: preparation, properties and applications10.1016/0920-5861(91)80068-K ↗
36. Thermogravimetric analysis of selected layered double hydroxides10.1007/s10973-012-2584-z ↗
37. Layered double hydroxides (LDH)
38. Spectroscopic characterization of the acid properties of metal oxide catalysts10.1016/S0920-5861(98)00049-2 ↗
39. Acidity and basicity of hydrotalcite derived mixed Mg-Al oxides studied by test reaction of MBOH conversion and temperature programmed desorption of NH3 and CO210.1016/j.materresbull.2003.09.032 ↗
40. Cu-Mg-Al hydrotalcite-like materials as precursors of effective catalysts for selective oxidation of ammonia to dinitrogen — the influence of Mg/Al ratio and calcination temperature10.1016/j.clay.2016.05.019 ↗
41. Effect of preparation procedures on catalytic activity and selectivity of copper-based mixed oxides in selective catalytic oxidation of ammonia into nitrogen and water vapour10.1016/j.apsusc.2017.06.144 ↗
42. An improved N2O-method for measuring Cu-dispersion10.1016/j.apcata.2004.02.009 ↗
43. Activating effect of cerium in hydrotalcite derived Cu–Mg–Al catalysts for selective ammonia oxidation and the selective reduction of NO with ammonia10.1007/s11144-017-1141-y ↗
44. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
45. Nano-scale pore structure and its multi-fractal characteristics of tight sandstone by n2 adsorption/desorption analyses: a case study of shihezi formation from the sulige gas filed, Ordos Basin, China10.3390/min10040377 ↗
46. Low temperature selective catalytic reduction of NO by ammonia over V2O5-CeO2/TiO210.1016/S1872-5813(08)60036-5 ↗
47. Microwave-assisted synthesis of flower-like and plate-like CuO nanopowder and their photocatalytic activity for polluted lake water10.4191/kcers.2012.49.2.151 ↗
48. In situ XRD, Raman, and TPR studies of CuO/Al2O3 catalysts for CO oxidation10.1016/j.molcata.2005.06.029 ↗
49. Characterization of Cu Al2O3 catalysts10.1016/0021-9517(78)90181-1 ↗
50. TPR and XRD studies of yttria-doped ceria/γ-alumina-supported copper oxide catalyst10.1016/S0926-860X(99)00286-0 ↗
51. Dispersion and reactivity of copper catalysts supported on Al2O3-ZrO210.1021/jp0575153 ↗
52. The role of copper species on Cu/γ-Al2O3 catalysts for NH3-SCO reaction10.1016/j.apsusc.2011.12.017 ↗
53. CuxCeMgAlO mixed oxide catalysts derived from multicationic LDH precursors for methane total oxidation10.1016/j.apcata.2019.117215 ↗
54. Effect of calcination temperature on structural and optical properties of MAl2O4 (M = Ni, Cu, Zn) aluminate spinel nanoparticles10.1007/s40145-019-0317-5 ↗
55. Surface and bulk properties of Cu-ZSM-5 and Cu/Al2O3 solids during redox treatments. Correlation with the selective reduction of nitric oxide by hydrocarbons10.1016/S0926-3373(97)00093-3 ↗
56. Annealing effects on crystallite size and band gap of CuO nanoparticles
57. Fabrication of CuO nanoparticles for structural, optical and dielectric analysis using chemical precipitation method10.1007/s10854-017-7083-3 ↗
58. Solution synthesis and activation of spinel CuAl2O4 film for solar water-splitting10.1016/j.jcat.2021.06.004 ↗
59. Novel CuO-containing catalysts based on ZrO2 hollow spheres for total oxidation of toluene10.1016/j.micromeso.2019.01.031 ↗
60. A characterization study of the surface acidity of solid catalysts by temperature programmed methods10.1016/S0926-860X(98)00041-6 ↗
61. Structural and surface acid/base properties of hydrotalcite-derived MgAlO oxides calcined at varying temperatures10.1006/jssc.1997.7739 ↗
62. Facile synthesis of copper oxide nanostructures and their application in non-enzymatic hydrogen peroxide sensing10.1016/j.snb.2014.11.051 ↗
63. Oxygen vacancies promote the activation of O2 in transition metal oxide doped ε-MnO2 for low-temperature CO oxidation10.1016/j.seppur.2024.128109 ↗
64. Activation of peroxydisulfate by defect-rich CuO nanoparticles supported on layered MgO for organic pollutants degradation: an electron transfer mechanism10.1016/j.cej.2021.134026 ↗
65. Cooperative effect between copper species and oxygen vacancy in Ce0.7−xZrxCu0.3O2 catalysts for carbon monoxide oxidation10.1007/s11705-021-2106-2 ↗
66. Selective low temperature NH3 oxidation to N2 on copper-based catalysts10.1006/jcat.1999.2524 ↗
67. Decomposition kinetics of ammonia in gaseous stream by a nanoscale copper-cerium bimetallic catalyst10.1016/j.jhazmat.2007.04.044 ↗
68. Selective catalytic oxidation of ammonia to nitrogen over CuO-CeO2 mixed oxides prepared by surfactant-templated method10.1016/j.apcatb.2013.01.029 ↗
69. Unraveling the mechanistic origin of high N2 selectivity in ammonia selective catalytic oxidation on CuO-based catalyst10.1021/acs.est.4c02656 ↗