Nanostructural design of a Pt-enriched layer generated on a Pt–Cr–Mn–Fe–Co–Ni high-entropy alloy thin film: electrochemical dealloying in acidic environments
Source abstract
Abstract
We fabricated Pt–Cr–Mn–Fe–Co–Ni alloy thin films on Pt(1 1 1) substrate using the arc-plasma deposition method at 973 K in ultrahigh vacuum (≈10 −7 Pa) while maintaining (1 1 1) lattice stacking from the substrate to the surface. The fabricated thin films were subsequently electrochemically dealloyed by applying square wave potential cycling with different combinations of upper and lower potentials in N 2 -purged 0.1 M HClO 4 . The nanostructural changes induced in the film surfaces by dealloying were as follows: upper and lower potentials of 1.2 and 0.6 V, as well as 1.0 and 0.0 V vs. the reversible hydrogen electrode (RHE) generated nanoporous Pt layers with a thickness of 5 nm on the thin film surface, whereas dealloying at upper and lower potentials of 1.0 V and 0.6 V vs. RHE resulted in a roughened Pt-enriched surface of several monolayers thick. The results suggest that the resulting nanostructures, which range from roughened Pt-enriched surface to nanoporous Pt layer, can be associated to specific dissolution rates of the constituent elements at given potentials, elemental distributions of the as-fabricated film, and Cr oxide at the electrode–electrolyte interface. This study demonstrates specific nanostructures can be fabricated by tuning the dealloying conditions of high-entropy alloy thin films.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. PEM fuel cell system control: a review10.1016/j.renene.2017.06.027 ↗
2. Contribution and investigation to compare models parameters of (PEMFC), comprehensives review of fuel cell models and their degradation10.1016/j.energy.2018.11.095 ↗
3. Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles10.1038/s41565-020-00824-w ↗
4. Benchmarking fuel cell electrocatalysts using gas diffusion electrodes: inter-lab comparison and best practices10.1021/acsenergylett.1c02659 ↗
5. Advanced platinum alloy electrocatalysts for the oxygen reduction reaction10.1021/cs3000792 ↗
6. Sub‐6 nm fully ordered L10 ‐Pt–Ni–Co nanoparticles enhance oxygen reduction via co doping induced ferromagnetism enhancement and optimized surface strain
7. Nanoscale structure design for high‐performance Pt‐based ORR catalysts
8. Current challenges related to the deployment of shape-controlled Pt alloy oxygen reduction reaction nanocatalysts into low Pt-loaded cathode layers of proton exchange membrane fuel cells10.1016/j.coelec.2019.10.011 ↗
9. Improved oxygen reduction activity on Pt3Ni(1 1 1) via increased surface site availability10.1126/science.1135941 ↗
10. Atomically ordered Pt3Mn intermetallic electrocatalysts for the oxygen reduction reaction in fuel cells10.1039/D2TA00127F ↗
11. Preparation of Pt supported on mesoporous carbons for the reduction of oxygen in polymer electrolyte membrane fuel cell (PEMFC)10.1007/s10832-006-8921-5 ↗
12. MgO-templated mesoporous carbon as a catalyst support for polymer electrolyte fuel cells10.3390/catal8060230 ↗
13. Editors’ choice—connecting fuel cell catalyst nanostructure and accessibility using quantitative Cryo-STEM tomography10.1149/2.0541803jes ↗
14. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
15. Revealing the nanostructure of mesoporous fuel cell catalyst supports for durable, high-power performance10.1149/1945-7111/abe28e ↗
16. Pore structure and durability improvement of CNovel ® mesoporous carbon as a support material for Pt catalysts in polymer electrolyte fuel cells10.1149/1945-7111/adb945 ↗
17. High entropy alloys: key issues under passionate debate10.1016/j.scriptamat.2020.07.010 ↗
18. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
19. Recent progress in our understanding of phase stability, atomic structures and mechanical and functional properties of high-entropy alloys10.2320/matertrans.MT-M2021234 ↗
20. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
21. Effect of Nd doping on the crystallographic, magnetic, and magnetocaloric properties of NdxGd3−xCoNi10.1063/5.0153045 ↗
22. Ferromagnetism in High Entropy Cantor alloy triggered and tuned by severe plastic deformation10.1016/j.actamat.2024.120421 ↗
23. High-entropy alloys as catalysts for the CO2 and CO reduction reactions: experimental realization10.1021/acscatal.9b04302 ↗
24. Multi‐sites electrocatalysis in high‐entropy alloys
25. Photocatalytic hydrogen evolution on a high-entropy oxide10.1039/C9TA12846H ↗
26. Mechanochemical-assisted synthesis of high-entropy metal nitride via a soft urea strategy10.1002/adma.201707512 ↗
27. High-entropy nanoparticles: synthesis-structure-property relationships and data-driven discovery
28. Azo dye degradation behavior of AlFeMnTiM (M = Cr, Co, Ni) high-entropy alloy10.1007/s12613-019-1716-x ↗
29. Degradation of methyl red at the surface of FeAlNiCuCo high-entropy alloys
30. Development of a novel high-entropy alloy with eminent efficiency of degrading azo dye solutions10.1038/srep34213 ↗
31. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
32. Large-scale and facile synthesis of a porous high-entropy alloy CrMnFeCoNi as an efficient catalyst10.1039/D0TA04940A ↗
33. The spontaneous passivation of multi principal element alloys II: the effect of Mn in the CoCrFeNiMn family10.1016/j.corsci.2024.112642 ↗
34. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
35. A thermodynamic study of corrosion behaviors for CoCrFeNi-based high-entropy alloys10.1007/s10853-018-2652-2 ↗
36. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO410.1016/j.corsci.2021.109694 ↗
37. On the corrosion resistance of the CoCrFeMnNi high entropy alloys in chloride-containing sulfuric acid solutions10.1016/j.apsusc.2024.161487 ↗
38. Roles of alloying elements in the corrosion resistance of equiatomic CoCrFeMnNi high-entropy alloy and application to corrosion-resistant alloy design10.2320/matertrans.MT-M2021136 ↗
39. Experimental study platform for electrocatalysis of atomic-level controlled high-entropy alloy surfaces10.1038/s41467-023-40246-5 ↗
40. Pt-surface stabilization by high-entropy alloys for enhancing oxygen reduction reaction property: Single-crystal model catalyst study10.1016/j.elecom.2023.107657 ↗
41. Surface nanostructures of Pt-compositionally complex alloy single-crystal model catalyst surfaces for improved oxygen reduction reaction: machine-learning-assisted exploration10.1021/acsami.4c22052 ↗
42. Enhanced oxygen reduction reaction activity on the melamine-modified Pt-high-entropy alloy single-crystal lattice stacking surface10.1021/acscatal.4c02191 ↗
43. Electrochemical oxide film formation at noble metals as a surface-chemical process10.1016/0079-6816(95)00040-6 ↗
44. Oxygen reduction reaction activities of Ni/Pt(1 1 1) model catalysts fabricated by molecular beam epitaxy10.1016/j.elecom.2010.05.042 ↗
45. Vapor pressure versus temperature relations of common elements10.3390/ma16010050 ↗
46. Phase diagrams for surface alloys10.1103/PhysRevB.56.5822 ↗
47. Surface segregation energies in transition-metal alloys10.1103/PhysRevB.59.15990 ↗
48. First principles analysis of surface dependent segregation in bimetallic alloys10.1039/C9CP03984H ↗
49. Enthalpies of formation of high entropy and multicomponent alloys using oxide melt solution calorimetry10.1016/j.intermet.2020.106897 ↗
50. Toward in situ dissolution monitoring of platinum nanoparticles by optimized online inductively coupled plasma mass spectrometry measurement10.1021/acsanm.5c00608 ↗
51. Dissolution trends of platinum-based intermetallic nanocatalysts toward the acidic oxygen reduction reaction10.1021/acscatal.5c06229 ↗
52. A. V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, and C.J. Powell, NIST X-ray Photoelectron Spectroscopy Database, (n.d.). doi: 10.18434/T4T88K.
53. Synthesis, characterization and stability of Cr(III) and Fe(III) hydroxides10.1016/j.jhazmat.2013.09.058 ↗
54. Platinum dissolution and redeposition from Pt/C fuel cell electrocatalyst at potential cycling10.1149/2.0191806jes ↗
55. Time-resolved measurements of dissolution rates of platinum and palladium by a solution flow cell combined with ICP-MS10.2320/matertrans.C-M2021820 ↗
56. Elucidation of electrochemically induced but chemically driven Pt dissolution10.1021/jacsau.2c00474 ↗
57. Towards a comprehensive understanding of platinum dissolution in acidic media10.1039/C3SC52411F ↗
58. Dynamics of electrochemical Pt dissolution at atomic and molecular levels10.1016/j.jelechem.2017.09.047 ↗
59. Effect of local corrosion caused by inclusions and surface scratches of steel in high temperature and pressure flue gas environment10.1088/1757-899X/542/1/012083 ↗
60. A critical review of the recent advances in inclusion-triggered localized corrosion in steel10.1038/s41529-022-00294-6 ↗
61. Unraveling the effect of Al2O3-MnS complex inclusion on the pitting corrosion behavior of dual phase steel10.1016/j.corsci.2024.111938 ↗
62. Insights into local corrosion induced by inclusions and thermodynamic stability of inclusions in oil-casing steel by zirconium treatment10.1016/j.corsci.2023.111737 ↗
63. Temperature dependence of oxygen reduction activity at Pt/Nb-doped SnO2 catalysts with varied Pt loading10.1021/acscatal.0c05157 ↗
64. Embedded oxide clusters stabilize sub-2 nm Pt nanoparticles for highly durable fuel cells10.1038/s41929-024-01180-x ↗