journal article·2026-04

Pulsed laser synthesis of mesoporous metal chalcogenide thin films

Dorien E. Carpenter, Zahra Nasiri, Nithesh R. Palagiri, Kamron L. Strickland, Sumner B. Harris, David B. Geohegan, Renato P. Camata

Publisher page

Abstract

Mesoporous films of the metal chalcogenide $β$-FeSe were grown on MgO substrates by KrF pulsed laser deposition (PLD) in an argon background. At 100 mTorr, gated intensified charge-coupled device imaging and ion probe measurements showed that the plasma plume responsible for crystal growth initially comprised three components, with distinct expansion velocities. Plume interactions with the substrate heater and ablation target gave rise to complex dynamics, including collisions between the charged leading edge -- rebounding between the substrate and the target -- and slower-moving species in the plume interior. Film growth was dominated by species with kinetic energies $\le$0.5 eV/atom. X-ray reflectivity and atomic force microscopy revealed that films grown in this environment -- with a substrate temperature of 350$^\circ$C, a laser fluence of 1.0 J cm$-2$, and a 7.5 mm$^2$ spot area -- formed a porous framework with 15% porosity and pore sizes below 100 nm. X-ray diffraction indicated that the porous films were epitaxial with respect to the substrate and likely grew by oriented-attachment of gas-phase molecular clusters or very small nanoparticles, in contrast to the conventional epitaxy of vacuum films from atomic constituents. The in-plane orientation of the mesoporous films was $β$-FeSe[100]$\parallel$[110]MgO, attributed to the soft landing of pre-formed crystallites on the MgO substrates, where protruding Se rows of $β$-FeSe aligned with corrugations of the MgO surface. This work implies that growth of candidate electrocatalyst materials by PLD in inert gas background may allow mesoporous frameworks with a single crystallographic orientation that expose specific crystal facets for electrochemical reactions and active site engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Iron-based superconductors research · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Metal chalcogenides: An emerging material for electrocatalysis10.1063/5.0049772 ↗
2. Transition metal-based chalcogenides as electrocatalysts for overall water splitting10.1021/acsengineeringau.3c00014 ↗
3. Wide band gap chalcogenide semiconductors10.1021/acs.chemrev.9b00600 ↗
4. Composition and phase engineering of metal chalcogenides and phosphorous chalcogenides10.1038/s41563-022-01291-5 ↗
5. Layer-structured anisotropic metal chalcogenides: Recent advances in synthesis, modulation, and applications10.1021/acs.chemrev.2c00455 ↗
6. Dynamic surface self-reconstruction is the key of highly active perovskite nano-electrocatalysts for water splitting10.1038/nmat4938 ↗
7. Lattice-strain engineering of homogeneous NiS0.5Se0.5 core–shell nanostructure as a highly efficient and robust electrocatalyst for overall water splitting10.1002/adma.202000231 ↗
8. Recent developments in porous metal chalcogenides for environmental remediation and sustainable energy10.1002/eom2.12419 ↗
9. Enabling colloidal synthesis of edge-oriented MoS2 with expanded interlayer spacing for enhanced HER catalysis10.1021/acs.nanolett.6b05346 ↗
10. Nickel telluride as a bifunctional electrocatalyst for efficient water splitting in alkaline medium10.1039/C8TA01760C ↗
11. From a molecular 2Fe-2Se precursor to a highly efficient iron diselenide electrocatalyst for overall water splitting10.1002/ange.201706196 ↗
12. Reaction packaging CoSe2 nanoparticles in n-doped carbon polyhedra with bifunctionality for overall water splitting10.1021/acsami.8b20184 ↗
13. NiCo-DH nanodots anchored on amorphous NiCo-Sulfide sheets as efficient electrocatalysts for oxygen evolution reaction10.1016/j.electacta.2018.11.150 ↗
14. Emerging one-/two-dimensional heteronanostructure integrating SiC nanowires with MoS2 nanosheets for efficient electrocatalytic hydrogen evolution10.1021/acsami.0c02046 ↗
15. Interface engineering of hierarchical branched Mo-doped Ni3S2/NixPy hollow heterostructure nanorods for efficient overall water splitting10.1002/aenm.201903891 ↗
16. (FeSe2 + CoSe2) nanoparticles anchored on 3d porous ultrathin carbon nanosheets for high-activity oxygen evolution reaction10.1021/acsanm.3c01262 ↗
17. Mesoporous iron sulfide for highly efficient electrocatalytic hydrogen evolution10.1021/jacs.7b07044 ↗
18. Fe-based mesoporous nanostructures for electrochemical conversion and storage of energy10.1002/batt.202000228 ↗
19. Iron pnictides and chalcogenides: a new paradigm for superconductivity10.1038/s41586-021-04073-2 ↗
20. Topological surface superconductivity in FeSe0.45Te0.5510.1038/s42005-022-00943-x ↗
21. Pressure-dependent orbital-selective nematicity in FeSe10.1038/s41535-025-00824-w ↗
22. Direct evidence of interfacial coherent electron–phonon coupling in single-unit-cell FeSe film on Nb-doped SrTiO310.1103/qxfc-khzf ↗
23. Interfacial engineering of CuSe2/FeSe2 heterojunctions for water splitting: a pathway to high-performance hydrogen and oxygen evolution reactions10.1039/D5NR01393C ↗
24. Growth of nanostructures by cluster deposition: Experiments and simple models10.1103/RevModPhys.71.1695 ↗
25. An oriented nanoporous membrane prepared by pulsed laser deposition10.1002/adma.200401294 ↗
26. Synthesis and characterization of tungsten and tungsten oxide nanostructured films10.1016/j.cattod.2006.02.080 ↗
27. A tree-like nanoporous WO3 photoanode with enhanced charge transport efficiency for photoelectrochemical water oxidation10.1039/C5TA00823A ↗
28. Hierarchical TiO2 photoanode for dye-sensitized solar cells10.1021/nl101198b ↗
29. Aligned photoelectrodes with large surface area prepared by pulsed laser deposition10.1021/jp211233s ↗
30. Nonequilibrium synthesis of TiO2 nanoparticle ”building blocks” for crystal growth by sequential attachment in pulsed laser deposition10.1021/acs.nanolett.7b01047 ↗
31. Pulsed laser deposition of carbon nanofoam10.1016/j.apsusc.2022.153859 ↗
32. Tunable critical temperature for superconductivity in FeSe thin films by pulsed laser deposition10.1038/s41598-018-22291-z ↗
33. Double epitaxy of tetragonal and hexagonal phases in the FeSe system10.1016/j.jcrysgro.2019.01.031 ↗
34. Laser-generated plasmas in length scales relevant for thin film growth and processing: simulation and experiment10.1088/1361-6463/ab4828 ↗
35. Matplotlib: A 2D graphics environment10.1109/MCSE.2007.55 ↗
36. Surface studies of solids by total reflection of X-rays10.1103/PhysRev.95.359 ↗
37. GenX 3: The latest generation of an established tool10.1107/S1600576722006653 ↗
38. Dynamics of plume propagation and splitting during pulsed-laser ablation of Si in He and Ar10.1103/PhysRevB.58.1533 ↗
39. Dynamics of plume propagation, splitting, and nanoparticle formation during pulsed-laser ablation10.1016/S0169-4332(97)00625-9 ↗
40. Gas-phase nanoparticle formation and transport during pulsed laser deposition of Y1Ba2Cu3O7-d10.1063/1.124180 ↗
41. Time-resolved imaging of gas phase nanoparticle synthesis by laser ablation10.1063/1.121516 ↗
42. Low energy implantation into transition-metal dichalcogenide monolayers to form Janus structures10.1021/acsnano.9b10196 ↗
43. Birkholz · 2006
44. Properties of nanoporous silica thin films determined by high-resolution X-ray reflectivity and small-angle neutron scattering10.1063/1.371997 ↗
45. Structural characterization of a porous low-dielectric-constant thin film with a non-uniform depth profile10.1063/1.1495079 ↗
46. X-ray reflectivity characterization of ZnO/Al2O3 multilayers prepared by atomic layer deposition10.1021/cm011587z ↗
47. Soles · 2004
48. Determination of porosity of mesoporous silica thin films by quantitative X-ray reflectivity analysis and GISAXS10.1016/j.tsf.2005.08.356 ↗
49. X-ray scattering methods for porosity metrology of low-k thin films10.1063/1.3251214 ↗
50. Extreme sensitivity of superconductivity to stoichiometry in Fe1+δSe
51. Investigation of pressure impact on physical characteristics of FeSe chalcogenide superconductor: Insights from first principles calculation10.1016/j.commatsci.2024.112798 ↗
52. Particulate generation on surface of iron selenide films by air exposure10.1007/s10948-019-5020-9 ↗
53. Chemical composition control at the substrate interface as the key for FeSe thin-film growth10.1021/acsami.1c14451 ↗
54. Superconductivity in the PbO-type structure α-FeSe10.1073/pnas.0807325105 ↗
55. The development of the superconducting PbO-type β-FeSe and related compounds10.1016/j.physc.2009.03.022 ↗
56. Surface structure of MgO(001) surface studied by LEED10.1016/0039-6028(83)90314-X ↗
57. Atomic resolution imaging of the (001) surface of UHV cleaved MgO by dynamic scanning force microscopy10.1103/PhysRevLett.91.196102 ↗
58. Atomic and electronic structures of FeSe monolayer and bilayer thin films on SrTiO3 (001): First-principles study10.1103/PhysRevB.85.235123 ↗
59. Suppression of superconductivity by twin boundaries in FeSe10.1103/PhysRevLett.109.137004 ↗
60. Dumbbell defects in FeSe films: A scanning tunneling microscopy and first-principles investigation10.1021/acs.nanolett.6b01163 ↗
61. Process characteristics and film properties in pulsed laser deposition
62. Hierarchically organized nanostructured TiO2 for photocatalysis applications