Effect of bias power on the etching of aluminum alloys in inductively coupled HBr/Cl2/N2/O2 plasma
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Inductively coupled plasma reactive ion etching of silicon carbide10.3390/ma15010123 ↗
2. Etching of Ga2 O3 : an important process for device manufacturing10.1088/1361-6463/ad773d ↗
3. Foundations of atomic-level plasma processing in nanoelectronics10.1088/1361-6595/ac95bc ↗
4. Plasma and gas‐based semiconductor technologies for 2D materials with computational simulation & electronic applications10.1002/aelm.202300835 ↗
5. Correlation with the microstructure and synergistic physiochemical etching resistance of nanocomposites under fluorine-containing plasma conditions10.1021/acsami.2c12311 ↗
6. Grain size effect on the plasma etching behavior of spark plasma sintered yttria-stabilized zirconia ceramics10.1016/j.ceramint.2023.10.317 ↗
7. Plasma resistant glass (PRG) for reducing particulate contamination during plasma etching in semiconductor manufacturing: a review
8. Factor design for the oxide etching process to reduce edge particle contamination in capacitively coupled plasma etching equipment10.3390/app12115684 ↗
9. Reduced amount of contamination particle generated by CF4/Ar/O2 plasma corrosion of Y2O3 materials: Influence of defluorination process10.1016/j.mssp.2023.107809 ↗
10. Surface analysis of yttrium oxyfluoride deposited via air plasma spraying for erosion resistance against NF3 plasma10.1007/s43207-023-00332-2 ↗
11. Effect of porosity on etching rate and crater-like microstructure of sintered Al2O3, Y2O3, and YAG ceramics in plasma etching10.1016/j.ceramint.2024.01.436 ↗
12. Nano-YOF coatings with ultra-low etching rates in fluorocarbon plasma: influence of surface roughness on etching behavior10.1016/j.apsusc.2025.163997 ↗
13. Recent advances in plasma etching for micro and nano fabrication of silicon-based materials: a review10.1039/D4TC00612G ↗
14. Cryogenic cyclical etching of Si using CF4 plasma passivation steps: the role of CF radicals10.1063/5.0245217 ↗
15. Influences of substrate temperatures on etch rates of PECVD-SiN thin films with a CF4/H2 plasma10.1016/j.apsusc.2020.148550 ↗
16. Investigation of the etching mechanism of silicon nitride by CF4/O2/Ar gas mixture plasma in ICP10.1016/j.vacuum.2024.114000 ↗
17. Study on the etching mechanism of quartz using dual-frequency (60 MHz/400 KHz) capacitively coupled C4F8/Ar/O2 plasma10.1116/6.0004206 ↗
18. Etching characteristics and mechanisms of TiO2 thin films in HBr/Cl2/Ar inductively coupled plasma
19. Etching characteristics and mechanism of ZnO thin films in inductively coupled HBr/Ar plasma10.1016/j.tsf.2009.02.008 ↗
20. The reaction of fluorine atoms with silicon10.1063/1.329098 ↗
21. Comparative study of Cl2 + O2 and HBr + O2 plasma chemistries in respect to silicon reactive-ion etching process10.1016/j.vacuum.2020.110043 ↗
22. Ion flux composition in HBr/Cl2/O2 and HBr/Cl2/O2/CF4 chemistries during silicon etching in industrial high-density plasmas
23. Highly selective dry etching of GaN over AlGaN using Inductively coupled Cl2/N2/O2 plasmas10.1143/JJAP.42.L1139 ↗
24. Effects of N2 addition on aluminum alloy etching in inductively coupled plasma source10.1143/JJAP.38.6090 ↗
25. Chamber wall interactions with HBr/Cl2/O2 plasmas10.1116/1.4920933 ↗
26. Peculiarities of Si and SiO2 etching kinetics in HBr + Cl2 + O2 inductively coupled plasma10.1007/s11090-018-9943-x ↗
27. Plasma–wall interactions during silicon etching processes in high-density HBr/Cl2/O2 plasmas10.1088/0963-0252/14/2/S06 ↗
28. Production and loss mechanisms of SiClX etch products during silicon etching in a high density HBr∕Cl2∕O2 plasma10.1063/1.1786338 ↗
29. Formation of polycrystalline silicon germanium/HfO2 gate stack structure using inductively coupled plasma etching10.1116/1.1586283 ↗
30. Experimental and simulation studies of E-H mode transitions in Cl2 inductively coupled plasmas10.1063/5.0286985 ↗
31. A cutoff probe for the measurement of high density plasma10.1016/j.tsf.2013.01.026 ↗
32. Flat cutoff probe for real-time electron density measurement in industrial plasma processing10.1088/1361-6595/ab62d9 ↗
33. Wave cutoff method to measure absolute electron density in cold plasma10.1063/1.1771487 ↗
34. X-ray photoelectron spectroscopy: Towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
35. A step-by-step guide to perform x-ray photoelectron spectroscopy
36. Binding energy referencing in X-ray photoelectron spectroscopy: expanded data set confirms that adventitious carbon aligns to the vacuum level10.1016/j.apsusc.2024.160666 ↗
37. Compromising science by ignorant instrument calibration—need to revisit half a century of published XPS data10.1002/ange.201916000 ↗
38. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
39. Toward an increased reliability of chemical bonding assignment in insulating samples by X-ray photoelectron spectroscopy10.1126/sciadv.adi3192 ↗
40. Synthesis, structural and luminescence properties of MgO, Mg2SiO4 and MgO/Mg2SiO4 nanostructures10.2109/jcersj2.23132 ↗
41. Influence of aging on corrosion behaviour of the 6061 cast aluminium alloy10.3390/ma14081821 ↗
42. Effect of oxidation treatment on microstructure and electrochemical properties of 6061 aluminum alloy
43. Decomposition of Fe-intermetallics in Sr-modified cast 6XXX type aluminum alloys for automotive skin10.1007/s11661-001-0018-9 ↗
44. Measurements and modeling of ion energy distributions in high-density, radio-frequency biased CF4 discharges10.1063/1.1467403 ↗
45. Dynamic model and electrical characteristics for Rf-biased electronegative plasma sheath10.1109/TPS.2002.801537 ↗
46. Fourier-transform infrared and optical emission spectroscopy of CF4/O2/Ar mixtures in an inductively coupled plasma10.1063/1.1563819 ↗
47. Spectroscopic analysis of CF4/O2 plasma mixed with N2 for Si3N4 dry etching10.3390/coatings12081064 ↗
48. Roughening of porous SiCOH materials in fluorocarbon plasmas10.1063/1.3446820 ↗
49. Critical reassessment of the Fe-Si system10.1016/j.calphad.2016.11.003 ↗
50. The role of Mg2Si formation in the hydrogenation of Mg film and Mg nanoblade array on Si substrates10.1016/j.jallcom.2009.03.153 ↗
51. The structural, microstructural and thermoelectric properties of Mg2Si synthesized by SPS method under excess Mg content conditions10.1016/j.jallcom.2018.10.064 ↗
52. Characterization of Si(100) surface after high density HBr/Cl2/O2 plasma etching10.1143/JJAP.39.14 ↗
53. Plasma parameters, gas-phase chemistry and Si/SiO2 etching mechanisms in HBr+Cl2+O2 gas mixture: effect of HBr/O2 mixing ratio10.1016/j.vacuum.2019.02.014 ↗
54. Amorphous alumina nanoparticles: structure, surface energy, and thermodynamic phase stability10.1021/jp405820g ↗
55. Charging of pattern features during plasma etching10.1063/1.350241 ↗
56. Failure analysis of aircraft aluminum alloy structures in coastal environments10.4028/www.scientific.net/AMR.430-432.1509 ↗
57. Deformation, cracking and fracture behavior of dynamically-formed oxide layers on molten metals10.1007/s12540-019-00537-3 ↗
58. A study on material properties of intermetallic phases in a multicomponent hypereutectic Al-Si alloy with the use of nanoindentation Testing10.3390/ma13245612 ↗
59. First-principles study on surface corrosion of 6082 aluminum alloy in H+ and Cl− medium10.1016/j.molstruc.2023.136570 ↗
60. Graphene confined intermetallic magnesium silicide nanocrystals with highly exposed (2 2 0) facets for anisotropic lithium storage10.1016/j.cej.2021.129660 ↗
61. Improving the electrochemical behaviors and discharge performance of as-rolled Mg-4Li alloys through multicomponent alloying10.1016/j.jallcom.2021.162536 ↗
62. Enhancing welding strength of thermoplastic vulcanizate/aluminum alloy via adding zinc methacrylate10.1016/j.matchemphys.2023.127839 ↗
63. Preparation and anticorrosion properties of Co-Ti-Zr composite conversion coating on 6061 aluminium alloy of the scooter profile10.1016/j.matlet.2024.137344 ↗
64. The corrosion behavior of the 6061 Al alloy in simulated Nansha marine atmosphere10.1016/j.jmrt.2022.05.066 ↗
65. The preparation, corrosion resistance and formation mechanism of a new-type Mo-based composite conversion coating on 6061 aluminum alloy10.3390/met13010168 ↗