Effects of deposition parameters on morphology and mechanical properties of RDL-first copper seed layer films: a simulation study
Source abstract
Abstract
The seed layer preparation process in RDL-first technology represents a critical bottleneck for advanced packaging development. Existing research lacks in-depth analysis of the correlation between thin film morphological evolution and mechanical properties, hindering effective optimization of copper seed layer processes. This study systematically simulates the deposition kinetics of copper atoms and clusters on SiO 2 substrates, using visualization techniques to enable atomic-scale 3D reconstruction and quantitative characterization of deposition morphology. By examining the effects of deposition rate, incident energy, and incident angle on performances, a quantitative model correlating deposition parameters-microstructure-mechanical properties is established. Results reveal that atomic deposition exhibits kinetic advantages, while cluster deposition induces shadowing effects due to many-body interactions. Process parameters significantly influence indicators including root-mean-square (RMS) roughness, layer coverage, and radial distribution function, thereby governing mechanical performance. For atomic-deposited films, optimal elastic modulus (95.51 GPa, 84.14 GPa, 93.69 GPa) and maximum yield strength (7.75 GPa, 6.89 Gpa, 7.83 GPa) are achieved under moderate rate (6 atoms/ps), moderate energy (1 eV), and large angle (45°) conditions, showing positive correlation with morphological features. Furthermore, ductility of atomic-deposited films decreases with increasing incident angle and deposition rate, while it first increases then decreases with deposition energy, consistent with RMS roughness variations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Intrinsic plasticity of silicon nanowire neurotransistors for dynamic memory and learning functions10.1038/s41928-020-0412-1 ↗
2. Application of PVD methods to solid oxide fuel cells10.1016/j.apsusc.2014.03.163 ↗
3. Characteristics of Cu films prepared using a magnetron sputter type negative ion source (MSNIS)10.1016/j.nimb.2004.12.123 ↗
4. Complete filling of 41nm trench pattern using Cu seed layer deposited by SAM-modified electroless plating and electron-beam evaporation10.1016/j.apsusc.2009.11.012 ↗
5. 3D system integration on 300 mm wafer level: high-aspect-ratio TSVs with ruthenium seed layer by thermal ALD and subsequent copper electroplating10.1016/j.mee.2018.11.006 ↗
6. Emerging Non-noble-metal atomic layer deposited copper as seeds for electroless copper deposition10.3390/ma17071620 ↗
7. Electroless deposition of Cu seed layer catalyzed by Ag nanoparticles for micro through silicon via metallization
8. Molecular dynamics simulations of membrane permeability10.1021/acs.chemrev.8b00486 ↗
9. A comparison of multiscale methods for the analysis of molecular dynamics simulations10.1021/jp302103t ↗
10. Molecular dynamics and experimental study of the dewetting behaviors of discontinuous metal films10.1016/j.apsusc.2025.163181 ↗
11. Surface properties of film deposition using molecular dynamics simulation10.1016/j.surfcoat.2006.03.014 ↗
12. Atomic-level stress calculation and surface roughness of film deposition process using molecular dynamics simulation10.1016/j.commatsci.2010.02.018 ↗
13. Atomistic simulation of the glancing angle deposition of SiO2 thin films10.1016/j.jnoncrysol.2019.02.016 ↗
14. Effects of different incidence rates of carbon and silicon clusters on the surface properties of SiC films
15. Investigating the influence of substrate orientation and temperature on Cu cluster deposition10.1063/5.0193758 ↗
16. Molecular dynamics simulations of tensile deformation of gradient nano-grained copper film10.1016/j.commatsci.2017.10.043 ↗
17. Molecular dynamics study of the tensile properties of gold nanocrystalline films irradiated by gallium ions10.1016/j.jnucmat.2023.154448 ↗
18. Molecular dynamics simulation of uniaxial stretching for silicon nitride deposited by PECVD10.1016/j.apsusc.2024.161696 ↗
19. Introduction to materials studio software for the atomistic-scale simulations[M]//Forcefields for atomistic-scale simulations: materials and applications
20. New empirical approach for the structure and energy of covalent systems10.1103/PhysRevB.37.6991 ↗
21. Charge-optimized many-body potential for the hafnium/hafnium oxide system10.1103/PhysRevB.81.125328 ↗
22. Charge-optimized many-body potential for the hafnium/hafnium oxide system10.1103/PhysRevB.81.125328 ↗
23. Deposited Mono-component Cu Metallic Glass: a Molecular Dynamics Study
24. Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys10.1103/PhysRevB.33.7983 ↗
25. Molecular dynamics simulations of the effects of a nanoparticle surface adsorption layer on the thermal conductivity of a Cu–Ar nanofluid10.1007/s10765-021-02794-0 ↗
26. Diffusion Model of Lennard-Jones Fluids based on the radial distribution function10.1021/acs.jpcb.2c04019 ↗
27. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
28. Substrate-dependent deposition of Cu thin films by molecular dynamics simulations10.1039/D4CP04405C ↗