journal article·2026-03Open access

Nanoscale surface electrical properties of UV-exposed poly(lactic acid) films enriched with quercetin and magnesium. A kelvin probe force microscopy study

Juan Manuel Casares-López, Margarita Hierro-Oliva, María Luisa González-Martín, Amparo M. Gallardo-Moreno

Abstract

Electrostatic forces at the micro/nanoscale play a central role in interactions between cell and biomaterial surfaces. Modifying the electroactive properties of biomaterials can promote cell-proliferation, stimulate bone formation, and reduce bacterial adhesion. Kelvin Probe Force Microscopy (KPFM) is a technique to investigate localized electrostatic behaviour in biodegradable polymers like poly(lactic acid) (PLA). The electrical response of PLA can be tuned by conductive fillers like magnesium (Mg). Previous studies showed that additives such as quercetin (Qr) stabilise PLA by mitigating its rapid UV-induced degradation. This work analyses how UV-treatment affects the nano-electrical properties of PLA composites with different dopants and crystallinity levels, focusing on two KPFM parameters: surface potential and capacitance gradient. Amorphous PLA is more sensitive to modifications than crystalline PLA, especially in surface potential. Qr and Mg exert opposite influences: Qr shifts potential towards more negative values, whereas Mg induces values closer to zero. Capacitance gradient correlates with conductivity and increases when Mg is incorporated. UV exposure induces dopant- and crystallinity-dependency, generally narrowing values around the mean, which reflects stabilised surface potential and enhanced conductivity after photoactivation. The electrical changes may be decisive in biomedical applications where sterilization of the biocomposite by UV-light is a prerequisite for its use.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. Electroactive polymers for tissue regeneration: developments and perspectives10.1016/j.progpolymsci.2018.01.001 ↗
2. PVTF Nanoparticles/PLA Electroactive Degradable Membrane for Bone Tissue Regeneration10.3390/coatings14010115 ↗
3. Electrically conductive biomaterials based on natural polysaccharides: challenges and applications in tissue engineering10.1016/j.ijbiomac.2019.09.020 ↗
4. Surface potential analysis of nanoscale biomaterials and devices using Kelvin probe force microscopy10.1155/2016/4209130 ↗
5. Tip-sample capacitance in electrostatic force microscopy
6. Label-free and high-resolution protein/DNA nanoarray analysis using Kelvin probe force microscopy10.1038/nnano.2007.293 ↗
7. PLLA scaffolds with controlled surface potential and piezoelectricity for enhancing cell adhesion in tissue engineering10.1016/j.apsusc.2023.156835 ↗
8. Melt electrowritten poly-lactic acid /nanodiamond scaffolds towards wound-healing patches
9. Surface potential and charges impact on cell responses on biomaterials interfaces for medical applications10.1016/j.msec.2019.109883 ↗
10. Surface potential/charge sensing techniques and applications
11. Quantitative measurement of the local surface potential of π-conjugated nanostructures: a Kelvin probe force microscopy study10.1002/adfm.200600145 ↗
12. Imaging surface charges of individual biomolecules10.1021/nl9012979 ↗
13. H.J. Busscher, A.H. Weerkamp, H.C. Van, D. Mei, A.W.J. Van Pelt, H.P. De Jong, J. Arends, Measurement of the Surface Free Energy of Bacterial Cell Surfaces and Its Relevance for Adhesion, 1984. https://journals.asm.org/journal/aem.10.1128/aem.48.5.980-983.1984 ↗
14. Towards nanoscale electrical measurements in liquid by advanced KPFM techniques: a review10.1088/1361-6633/aab560 ↗
15. Direct study of the electrical properties of PC12 cells and hippocampal neurons by EFM and KPFM10.1039/C8NA00202A ↗
16. Surface potential measurement of bacteria using Kelvin probe force microscopy10.3791/52327-v ↗
17. Modified Carbon Nanotubes Favor Fibroblast Growth by Tuning the Cell Membrane potential10.1021/acsami.3c14527 ↗
18. Kelvin probe force microscopy10.1063/1.105227 ↗
19. Influence of Ultraviolet-ray Irradiation on the Mechanical and Electrical Properties of Polylactic Acid
20. Incorporation of zinc oxide nanoparticles improved the mechanical, water vapor barrier, UV-light barrier, and antibacterial properties of PLA-based nanocomposite films10.1016/j.msec.2018.08.002 ↗
21. Poly(lactic acid)/ZnO bionanocomposite films with positively charged ZnO as potential antimicrobial food packaging materials10.3390/polym11091427 ↗
22. Improvement of the mechanical properties and osteogenic activity of 3D-printed polylactic acid porous scaffolds by nano-hydroxyapatite and nano-magnesium oxide10.1016/j.heliyon.2022.e09748 ↗
23. Colloidal Solutions as Advanced Coatings for active packaging Development: Focus on PLA Systems10.3390/polym15020273 ↗
24. Poly-L-Lactic Acid (PLLA)-based Biomaterials for Regenerative Medicine: a Review on Processing and applications10.3390/polym14061153 ↗
25. Poly (lactic acid) blends: Processing, properties and applications10.1016/j.ijbiomac.2018.12.002 ↗
26. In vitro degradation of biodegradable polylactic acid/magnesium composites: Relevance of Mg particle shape10.1016/j.actbio.2015.12.037 ↗
27. Bioabsorbable implant material review, Oper Tech
28. Review of sustainable, eco-friendly, and conductive polymer nanocomposites for electronic and thermal applications: current status and future prospects10.1186/s11671-024-03965-2 ↗
29. Poly- l -lactic acid nanotubes as soft piezoelectric interfaces for biology: controlling cell attachment via polymer crystallinity10.1021/acsabm.0c00012 ↗
30. Mechanical and electrical properties of polylactic acid/carbon nanotube composites by rolling process
31. Conductivity and mechanical properties of carbon black-reinforced poly(lactic acid) (PLA/CB) composites10.1007/s13726-021-00973-2 ↗
32. Design of an UV-C shielded biopolymer based on a poly(lactic acid)/quercetin/magnesium composite
33. Assessment of mechanical behavior of PLA composites reinforced with Mg micro-particles through depth-sensing indentations analysis10.1016/j.jmbbm.2016.09.013 ↗
34. Dielectric investigations on how Mg salt is dispersed in and released from polylactic acid10.1007/s10118-014-1421-1 ↗
35. Mg-Doped PLA Composite as a potential Material for Tissue Engineering—Synthesis
36. Polymeric Biomaterials for Medical Implants and Devices10.1021/acsbiomaterials.5b00429 ↗
37. Sterilization of implantable polymer-based medical devices: a review10.1016/j.ijpharm.2017.12.003 ↗
38. V. Hasirci, N. Hasirci, Sterilization of Biomaterials, in: Fundamentals of Biomaterials, Springer New York, 2018: pp. 187–198. DOI: 10.1007/978-1-4939-8856-3_13.10.1007/978-1-4939-8856-3_13 ↗
39. C.A.M., S.G.L.M. García Carpintero E.E., Revisión bibliográfica sobre la eficacia y seguridad de la luz ultravioleta y Ozono para la desinfección de superficies, Informes de Evaluación de Tecnologías Sanitarias AETS-ISCIII, 2020.
40. E. Olewnik-Kruszkowska, I. Koter, J. Skopińska-Wis̈niewska, J. Richert, Degradation of polylactide composites under UV irradiation at 254 nm, J Photochem Photobiol A Chem 311 (2015) 144–153. DOI: 10.1016/j.jphotochem.2015.06.029.10.1016/j.jphotochem.2015.06.029 ↗
41. Influence of UV Ageing on Properties of Printed PLA Containing Graphene Nanopowder10.3390/ma15228135 ↗
42. The effect of UV aging on antimicrobial and mechanical properties of PLA films with incorporated zinc oxide nanoparticles10.3390/ijerph15040794 ↗
43. Effects of ultraviolet light (315 nm), temperature and relative humidity on the degradation of polylactic acid plastic films10.1016/j.chemosphere.2003.11.038 ↗
44. A new strategy to prepare fully bio-based poly(lactic acid) composite with high flame retardancy, UV resistance, and rapid degradation in soil10.1016/j.cej.2021.131979 ↗
45. Long-term phototransformation of microplastics under simulated sunlight irradiation in aquatic environments: Roles of reactive oxygen species10.1016/j.watres.2020.115564 ↗
46. Surface Modification of Poly(Lactic Acid)
47. Composition dependence in surface properties of poly(lactic acid)/graphene/carbon nanotube composites10.1016/j.matchemphys.2020.122702 ↗
48. Poly(lactic acid)/poly(ethylene glycol) polymer nanocomposites: Effects of graphene nanoplatelets10.3390/polym6010093 ↗
49. Electrically triggered drug delivery from novel electrospun poly(Lactic acid)/graphene oxide/quercetin fibrous scaffolds for wound dressing applications10.3390/pharmaceutics13070957 ↗
50. Pushing the limits of PLA by exploring the power of MWCNTs in enhancing thermal, mechanical properties, and weathering resistance10.1038/s41598-023-43660-3 ↗
51. Comparison of Polylactide-based active Films Containing Berberine and Quercetin as Systems for Maintaining the Quality and Safety of Blueberries10.3390/polym16111577 ↗
52. Antibacterial films based on polylactide with the addition of quercetin and poly(ethylene glycol)10.3390/ma14071643 ↗
53. Improvement of electrical and Mechanical Properties of PLA/PBAT Composites using Coconut Shell Biochar for Antistatic applications
54. Electrical properties of biodegradable polylactic acid film10.1109/TIA.2004.830751 ↗
55. Electronic characterization of organic thin films by Kelvin probe force microscopy10.1002/adma.200501394 ↗
56. C. Kittel, Introduction to Solid State Physics, 2005.
57. Scanning Probe Microscopy
58. Kasap · Principles of Electronic Materials & Devices · 2018
59. The influence of surface topography on Kelvin probe force microscopy10.1088/0957-4484/20/50/505503 ↗
60. Geometric artefact suppressed surface potential measurements10.1088/0957-4484/17/15/019 ↗
61. Energy Level Alignment and Interfacial Electronic Structures at Organic/Metal and Organic/Organic Interfaces
62. W. Kowalsky, E. Becker, T. Benstem, H.-H. Johannes, D. Metzdorf, H. Neuner, J. Schsbel, Organic semiconductors: fundamentals and applications, Advances in Solid State Physics 40 ISBN 978-3-540-41576-3, 2000. DOI: 10.1007/BFb0108396.10.1007/BFb0108396 ↗
63. Interpreting Kelvin probe force microscopy on semiconductors by Fourier analysis10.1063/5.0024073 ↗
64. Surface potential microscopy for organized molecular systems10.1016/S0169-4332(01)00958-8 ↗
65. Feasibility of Kelvin probe force microscopy to measure the surface potential decay of polystyrene film due to relative humidity10.1002/app.55058 ↗
66. Close look at charge carrier injection in polymer field-effect transistors10.1063/1.1613369 ↗
67. Fermi level determination in organic thin films by the Kelvin probe method10.1063/1.363757 ↗
68. Kelvin Probe Force Microscopy
69. Physical and Chemical Methods for increasing the Hydrophilicity of the Surface of Aliphatic Polyesters for Tissue-Engineered Constructs10.1134/S2075113320030090 ↗
70. Effect of blending procedures and reactive compatibilizers on the properties of biodegradable poly(butylene adipate-co-terephthalate)/poly(lactic acid) blends10.1515/polyeng-2020-0161 ↗
71. Influence of solvent and substrate on hydrophobicity of pla films10.3390/polym13244289 ↗
72. Aging of solvent-casting PLA-Mg hydrophobic films: Impact on bacterial adhesion and viability10.3390/coatings9120814 ↗
73. Effect of plasma treatment on the surface properties of polylactic acid films10.1016/j.polymertesting.2021.107097 ↗
74. Effect of sterilization on implant mechanical property and biocompatibility10.1177/039139880502801110 ↗
75. Aging of 3d printed polymers under sterilizing uv-c radiation10.3390/polym13244467 ↗
76. AENOR, Métodos de exposición a fuentes luminosas de laboratorio. Parte 3: Lámparas UV fluorescentes (ISO 4892-3:2016), 2016. www.aenor.es.
77. THE WORK FUNCTION OF GOLD
78. S. Cheng, C.M. Tan, T. Deng, F. He, S. Zhang, H. Su, Investigation of work function and surface energy of aluminium: an ab-initio study, IEEE, 3 IEEE 5th International Nanoelectronics Conference (INEC), 2013.10.1109/INEC.2013.6466081 ↗
79. Work Function, Photoelectric Threshold, and. Surface States of Atomically Clean
80. Experimental measurement of work function in doped silicon surfaces10.1016/j.sse.2009.09.005 ↗
81. Nanoscale quantitative measurement of the potential of charged nanostructures by electrostatic and Kelvin probe force microscopy: Unraveling electronic processes in complex materials10.1021/ar900247p ↗
82. Finite element simulations of the resolution in electrostatic force microscopy10.1007/s003390051138 ↗
83. Resolution of Kelvin probe force microscopy in ultrahigh vacuum: Comparison of experiment and simulation, in10.1016/S0169-4332(02)01475-7 ↗
84. Resolution and contrast in Kelvin probe force microscopy10.1063/1.368181 ↗
85. The role of the cantilever in Kelvin probe force: Microscopy measurements10.3762/bjnano.2.29 ↗
86. Quantitative noncontact electrostatic force imaging of nanocrystal polarizability10.1021/jp0265438 ↗
87. Cantilever effects on the measurement of electrostatic potentials by scanning Kelvin probe microscopy10.1063/1.1384004 ↗
88. Visualization of charge propagation along individual pili proteins using ambient electrostatic force microscopy10.1038/nnano.2014.236 ↗
89. Flexible magnesium-ion-conducting solid poly-blend electrolyte films for magnesium-ion batteries10.1007/s10854-024-13458-8 ↗
90. Enhancing conductivity in polymers: the role of metal ions in conducting polymer systems10.1002/pat.6505 ↗
91. Neural regeneration ability of Polypyrrole-Collagen-Quercetin composite in the spinal cord injury10.1016/j.reth.2023.05.010 ↗
92. Kelvin probe force microscopy in liquid using electrochemical force microscopy10.3762/bjnano.6.19 ↗
93. Kelvin probe force microscopy in nonpolar liquids10.1021/la302451h ↗