Atomic-level insights into metal–polyimide adhesion: diffusion-driven interface formation governs adhesion strength
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Synthesis and properties of polymers · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Nonstoichiometric copper sulfide nanostructures at the brass–rubber interface: Implications for rubber vulcanization temperature in the tire industry10.1021/acsanm.0c01298 ↗
2. Chemical reaction and bonding mechanism at the polymer–metal interface10.1021/acsami.2c04971 ↗
3. A conceptual strategy toward high-reliability metal–thermoplastic hybrid structures based on a covalent-bonding mechanism10.1021/acsami.2c14385 ↗
4. Surface modification for enhanced lap shear strength of the epoxy-bonded joints consisting of metallic adherents and similar/dissimilar materials10.1021/acsapm.3c00748 ↗
5. Interface wetting driven by Laplace pressure on multiscale topographies and its application to performance enhancement of metal–composite hybrid structure10.1021/acsami.2c22358 ↗
6. Heteroatom introduction to reconstruct interfacial chemical structures for high-reliability CFRTP/A6061-T6 hybrid structures10.1021/acsami.3c05249 ↗
7. Superhydrophilic and antifriction thin hydrogel formed under mild conditions for medical bare metal guide wires10.1021/acsami.3c15211 ↗
8. On the prospect of enhancing the adhesion strength at metal–organic interfaces via tensile strain10.1021/acsaenm.4c00836 ↗
9. S. Diaham, Polyimide in electronics: applications and processability overview, in: S. Diaham (Eds.) Polyimide for Electronic and Electrical Engineering Applications, IntechOpen, 2021. doi: 10.5772/intechopen.92629.10.5772/intechopen.92629 ↗
10. Interfacial reaction during metallization of cured polyimide: an XPS study10.1116/1.572564 ↗
11. Photoemission spectroscopy study of aluminum-polyimide interface10.1116/1.572786 ↗
12. Metal polyimide interface: a titanium reaction mechanism10.1116/1.573450 ↗
13. Aluminum/polyimide interface formation: an x-ray photoelectron spectroscopy study of selective chemical bonding10.1116/1.574191 ↗
14. Metal-polymer chemistry. I. Charge-transfer-related modifications of polyimide (pyromellitic dianhydride-4,4'-oxydianiline)10.1116/1.575046 ↗
15. Complex formation and growth at the Cr– and Cu–PI interface10.1116/1.575010 ↗
16. Chemical bonding and reaction at metal/polymer interfaces10.1116/1.573298 ↗
17. Adhesion and interface chemical reactions of Cu/Polyimide and Cu/TiN by XPS10.1016/S0169-4332(02)01016-4 ↗
18. Analysis and interpretation of the vibrational spectrum of the pyromellitic dianhydride-oxydianiline polyimide and its charge-transfer complex with a chromium atom10.1021/ma00199a045 ↗
19. Polymer/metal interfaces studied by carbon near-edge x-ray absorption fine structure spectroscopy10.1063/1.455042 ↗
20. A theoretical study of the bonding and XPS spectra of chromium interacting with a polyimide model compound10.1021/om00146a024 ↗
21. Identification of physical and chemical interaction mechanisms for the metals gold, silver, copper, palladium, chromium, and potassium with polyimide surfaces10.1021/la950125v ↗
22. T. Miyamura, Ph.D. Dissertation, Tohoku University, 2009 (in Japanese).
23. J. Friedrich, High-performance metal-polymer composites: chemical bonding, adhesion, and interface design, in: J. Friedrich (Eds.), Metal-Polymer Systems: Interface Design and Chemical Bonding, 2017. doi: 10.1002/9783527679898.ch1.10.1002/9783527679898 ↗
24. Effect of Cr thickness on adhesion strength of Cu/Cr/polyimide flexible copper clad laminate fabricated by roll-to-roll process10.2320/matertrans.M2009276 ↗
25. EELS studies of carbide derived carbons10.1016/j.carbon.2007.05.022 ↗
26. Study of the L23 edges in the 3d transition metals and their oxides by electron-energy-loss spectroscopy with comparisons to theory10.1103/PhysRevB.26.614 ↗
27. An investigation on focused electron/ion beam induced degradation mechanisms of conjugated polymers10.1039/c1cp22406a ↗
28. Chemical fingerprinting of polymers using electron energy-loss spectroscopy10.1021/acsomega.1c02939 ↗
29. Fabrication of a bilayer structure of Cu and polyimide to realize circuit microminiaturization and high interfacial adhesion in flexible electronic devices10.1021/acsami.8b15835 ↗
30. High-energy electron-irradiated fluorinated ethylene polypropylene copolymer coatings on Al substrates for enhanced metal adhesion and protection10.1021/acsanm.2c00766 ↗
31. Calculations of electron inelastic mean free paths. V. Data for 14 organic compounds over the 50–2000 eV range10.1002/sia.740210302 ↗
32. Calculations of electron inelastic mean free paths. X. Data for 41 elemental solids over the 50 eV to 200 keV range with the relativistic full Penn algorithm10.1002/sia.5789 ↗
33. On the origin of a third spectral component of C1s XPS-spectra for nc-TiC/a-C nanocomposite thin films10.1016/j.surfcoat.2007.12.038 ↗
34. Comparison of chromium carbide thin films grown by different power supply systems10.1016/j.surfcoat.2018.07.107 ↗
35. A. Furlan, U. Jansson, J. Lu, L. Hultman, M. Magnuson, Structure and bonding in amorphous iron carbide thin films, J. Phys.: Condens. Matter 27 (2015) 045002, Doi: 10.1088/0953-8984/27/4/045002.10.1088/0953-8984/27/4/045002 ↗
36. In situ observations of phase transitions in metastable nickel (carbide)/carbon nanocomposites10.1021/acs.jpcc.6b01555 ↗
37. Copper-based catalysts for selective hydrogenation of acetylene derived from Cu(OH)210.1021/acsomega.0c05759 ↗
38. Electrochemical performance of TiCN coatings with low carbon concentration in simulated body fluid10.1016/j.surfcoat.2014.05.037 ↗
39. Synthesis and properties of Pt/TiN catalyst for low-temperature air purification from carbon monoxide
40. High-resolution photoemission study of the interfacial reaction of Cr with polyimide and model polymers10.1103/PhysRevB.36.1369 ↗
41. An elevated temperature study of a Ti adhesion layer on polyimide10.1016/j.tsf.2013.01.016 ↗
42. Combined TEM and XPS studies of metal–polymer interfaces for space applications10.1016/j.surfcoat.2017.07.079 ↗
43. Interfacial mutations in the Al-polyimide system10.1002/sia.6434 ↗
44. A study of the chemical and physical interaction between copper and polyimide10.1116/1.576293 ↗
45. Oxygen induced adhesion degradation at metal/polyimide interface10.1116/1.577157 ↗
46. Effects of thermal Curing on the Structure of Polyimide Film10.1295/polymj.30.229 ↗
47. R. Zhang, J. Xue, Y. Li, B. Cao, P. Li, A chemical imidization method to avoid pore collapsing and selective layer thickening of PMDA-ODA polyimide nanofiltration membranes. Desalin. Water Treat. 115 (2018) 33-44, 10.5004/dwt.2018.22470.10.5004/dwt.2018.22470 ↗
48. Preparation of polyimide films via microwave-assisted thermal imidization10.1039/C9RA00355J ↗
49. National Institute for Materials Science (NIMS), Diffusion Database, https://diffusion.nims.go.jp/ (accessed 14 September 2025).
50. The rate of diffusion of carbon in alpha and beta titanium
51. The diffusion of gases through metals: III—The degassing of nickel and the diffusion of carbon monoxide through nickel
52. The mechanical damping of iron from room temperature to 400°C at 7 megacycles/sec10.1016/0001-6160(66)90018-6 ↗
53. Diffusion of carbon and nitrogen in b.c.c. iron10.1016/0025-5416(76)90229-9 ↗
54. Annealing and aging of interstitial C in alpha-Fe, as measured by internal friction10.1007/BF02652340 ↗
55. Diffusion coefficient of C in α-iron10.1103/PhysRev.79.601 ↗
56. The diffusion of carbon in alpha iron10.1080/14786440908520512 ↗
57. The solubility of C in solid Cu10.1016/j.scriptamat.2004.03.028 ↗
58. NIST Chemistry WebBook, SRD 69, https://webbook.nist.gov/cgi/formula?ID=C12070085&Mask=2 (accessed 15 September 2025).
59. NIST Chemistry WebBook, SRD 69, https://webbook.nist.gov/cgi/cbook.cgi?ID=C12105816&Mask=2 (accessed 15 September 2025).
60. M. W. Chase Jr., NIST-JANAF Thermochemical Tables, 4th Eds., J. Phys. Chem. Ref. Data, Monograph 9, 1998, pp. 1–1951.
61. Enthalpies of formation of chromium carbides10.1007/BF02677258 ↗
62. Standard enthalpies of formation of some 3d transition metal carbides by high temperature reaction calorimetry10.1016/S0925-8388(97)00023-6 ↗
63. S. Maeda, Interfacial analysis and bonding mechanism between polymer and metal related to electronic materials. J. Jpn. Soc. Colour Mater. 78 (2005) 131-140 (Japanese), Doi: 10.4011/shikizai1937.78.131.10.4011/shikizai1937.78.131 ↗
64. An Auger study on the interaction of Cu and Cr films with polyimide10.1163/156856194X00041 ↗
65. Cohesive failure of the Cu/polyimide system10.1016/S0921-5093(99)00763-7 ↗
66. The effects of Cr oxidation and polyimide degradation on interface adhesion strength in Cu/Cr/polyimide flexible films10.1016/j.msea.2006.09.097 ↗
67. Adhesion measurement of a buried Cr interlayer on polyimide10.1080/14786435.2014.920543 ↗
68. Adhesion enhancement of polymer surfaces by atmospheric plasma treatment10.1088/0022-3727/34/18/307 ↗
69. Kinetics of alkaline hydrolysis of a polyimide surface10.1021/la991105m ↗
70. High-resolution identification of chemical states in individual metal clusters in an insulating amorphous polymer10.1021/acs.analchem.6b00305 ↗
71. Changes in the chemical state of metallic Cr during deposition on a polyimide substrate: Full soft XPS and ToF-SIMS depth profiles10.1016/j.apsusc.2021.149437 ↗