Enhanced lubricity of diamond films in simulated seawater via in situ synthesized dual-oriented graphene sheets
Source abstract
Abstract
Microcrystalline diamond (MCD) coatings exhibit high friction coefficients due to their rough surface morphology with sharp protrusions, which cause substantial ploughing during sliding contact. To address this challenge, a novel in situ synthesis strategy leveraging bimetallic (Ni/Ga) synergistic catalysis was developed in this study. The growth of a dual-oriented graphene-microcrystalline diamond (DG-MCD) was achieved via this approach, and the graphene binds the MCD by covalent bond. Compared with pure MCD, the DG‑MCD coating exhibits a low friction coefficient of 0.03 and an ultra‑low wear rate of 1.65 × 10⁻⁶ mm³/(N·m) in simulated seawater environment, a reduction of 53.8% and 56.3%, respectively. This enhancement is attributed to the unique dual-oriented graphene structure at the coating surface, which operates through two complementary mechanisms. First, it mitigates interfacial frictional chemical reactions. This reduction in chemical activity minimizes interfacial adhesion, thereby directly reducing the coating's friction coefficient. Second, the graphene structure facilitates the formation of "graphene nanoscrolls" during friction, which transform the contact interface from pure sliding to a hybrid sliding-rolling mode and thus effectively enhance the tribological performance. This work illustrates that engineering a dual‑oriented graphene nanostructure on diamond coatings offers an effective approach for enhancing their tribological properties in simulated seawater environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Lubricants and Their Additives · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Sulfate-dependant microbially induced corrosion of mild steel in the deep sea: a 10-year microbiome study10.1186/s40168-021-01196-6 ↗
2. Effect of deep sea pressures on the corrosion behavior of X65 steel in the artificial seawater10.1007/s40195-018-0856-8 ↗
3. A statistical study on the effect of hydrostatic pressure on metastable pitting corrosion of X70 pipeline steel10.3390/ma10111307 ↗
4. Comparative study on the stress corrosion cracking of X70 pipeline steel in simulated shallow and deep sea environments10.1016/j.msea.2016.12.118 ↗
5. Tribological behavior of diamond coated reaction-bonded silicon carbide under dry and seawater environment10.1016/j.surfcoat.2023.130204 ↗
6. Investigating the ultimate PcV performance of diamond-modified silicon carbide seal rings in high-load, high-speed water environments10.1016/j.diamond.2026.113441 ↗
7. Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals
8. Development of ultrananocrystalline diamond (UNCD) coatings for multipurpose mechanical pump seals10.1016/j.wear.2010.10.059 ↗
9. Solid particle erosion of CVD diamond coatings: a review
10. Applications of diamond to improve tribological performance in the oil and gas industry10.3390/lubricants6030084 ↗
11. Effect of temperature on the tribological properties of diamond coatings in simulated seawater environment10.1016/j.diamond.2025.112558 ↗
12. The improvement of cutting performance in semi-dry condition by the combination of DLC coating and CVD smooth surface diamond coating10.1016/j.surfcoat.2005.02.022 ↗
13. Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments10.1016/j.surfcoat.2006.11.024 ↗
14. Preparation and tribological properties of micro-textured diamond/WSx coatings10.1016/j.surfcoat.2020.126369 ↗
15. Tribological behavior between micro- and nano-crystalline diamond films under dry sliding and water lubrication10.1016/j.triboint.2013.09.012 ↗
16. Polishability and tribological performances of various CVD diamond coatings deposited on SiC ceramics seal ring10.1016/j.triboint.2025.110943 ↗
17. High-temperature friction and oxidation resistance of self-sacrificial diamond-graphene heterostructures coatings10.1016/j.carbon.2025.120072 ↗
18. Synergistic friction-reducing and anti-wear behaviors of graphene with micro- and nano-crystalline diamond films10.1016/j.diamond.2016.11.012 ↗
19. Lubrication properties of graphene under harsh working conditions
20. Friction and wear characteristics of multi-layer graphene films investigated by atomic force microscopy10.1016/j.surfcoat.2011.04.092 ↗
21. Enhancement on the tribological performance of diamond films by utilizing graphene coating as a solid lubricant10.1016/j.surfcoat.2016.12.094 ↗
22. Low friction coefficient bioinspired copper/graphene nanolaminates with high content graphene10.1016/j.surfcoat.2024.130486 ↗
23. Corrosion and wear resistance improvements in NiCu alloys through flame-grown honeycomb carbon and CVD of graphene coatings10.1016/j.surfcoat.2023.130040 ↗
24. Structure, superlubricity, applications, and chemical vapor deposition methods of graphene solid lubricants10.1016/j.triboint.2024.109896 ↗
25. Tribology of graphene: a review10.1007/s12541-014-0373-2 ↗
26. Graphene: a new emerging lubricant10.1016/j.mattod.2013.12.003 ↗
27. S.A.D. Diana Berman, 1 Subramanian K. R. S. Sankaranarayanan,1, A.V.S. Ali Erdemir, Macroscale superlubricity enabled by graphene nanoscroll formation. science, 348 (2015) 1118-1122.10.1126/science.1262024 ↗
28. Low temperature preparation of the monolayer-graphene/diamond heterostructure with superior mechanical properties10.1016/j.carbon.2024.119551 ↗
29. Instantaneous formation of covalently bonded diamond–graphite–graphene with synergistic properties10.1016/j.ijmachtools.2023.104087 ↗
30. The influence of normal load on the tribological performance of electrophoretic deposition prepared graphene coating on micro-crystalline diamond surface10.1016/j.diamond.2017.04.008 ↗
31. Graphenization of diamond10.1021/acs.chemmater.1c04322 ↗
32. Interfacial interaction-induced super-wettability of gallium-based liquid metals: a review10.1039/D3TA07297E ↗
33. Enhanced lubricity of CVD diamond films by in-situ synthetization of top-layered graphene sheets10.1016/j.carbon.2021.08.077 ↗
34. Covalent graphene-diamond heterostructure coating on tool surface with enhanced lubricity and anti-wear performance10.1016/j.carbon.2023.118648 ↗
35. Ultrahigh mechanical robustness of vertical graphene sheets covalently bonded to diamond10.1016/j.carbon.2022.09.046 ↗
36. Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen10.1016/j.carbon.2013.03.006 ↗
37. Nanoscale friction properties of graphene and graphene oxide10.1016/j.diamond.2014.10.012 ↗
38. Role of humidity in reducing sliding friction of multilayered graphene10.1016/j.carbon.2015.01.053 ↗
39. Review of the role of CVD growth parameters on graphene coating characteristics and the resulting corrosion resistance10.1016/j.surfcoat.2024.130934 ↗
40. The effect of graphene orientation on permeability and corrosion initiation under composite coatings10.1016/j.conbuildmat.2021.126080 ↗
41. Multi-layer graphene coating for corrosion resistance of Monel 400 alloy in chloride environment10.1016/j.surfcoat.2019.04.077 ↗
42. Durable corrosion resistance of copper due to multi-layer graphene10.3390/ma10101112 ↗
43. Defects mediated corrosion in graphene coating layer10.1021/acsami.7b01539 ↗
44. Phase equilibria related to NiGa(5) in the binary Ni-Ga system10.3390/ma17040883 ↗
45. Formation and growth of intermetallic compounds during reactions between liquid gallium and solid nickel10.3390/ma14195694 ↗
46. Combinatorial Cu-Ni alloy thin-film catalysts for layer number control in chemical vapor-deposited graphene10.3390/nano12091553 ↗
47. In situ self-adaptive growth of graphene coatings on hard substrates via competitive NiCo catalysis reaction10.1016/j.carbon.2023.118561 ↗
48. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
49. M. Bayle, N. Reckinger, J.-R. Huntzinger, A. Felten, A. Bakaraki, P. Landois, J.-F. Colomer, L. Henrard, A.-A. Zahab, J.-L. Sauvajol, M. Paillet, Dependence of the Raman spectrum characteristics on the number of layers and stacking orientation in few-layer graphene. physica status solidi (b), 252 (2015) 2375-2379.10.1002/pssb.201552204 ↗
50. Interlayer epitaxy of wafer-scale high-quality uniform AB-stacked bilayer graphene films on liquid Pt(3)Si/solid Pt10.1038/s41467-019-10691-2 ↗
51. Synthesis and characterization of large-area graphene and graphite films on commercial Cu-Ni alloy foils10.1021/nl201699j ↗
52. Growth of ultra-uniform graphene using a Ni/W bilayer metal catalyst
53. Atomic insights into the graphitization behavior of (001)-diamond with Ni catalysis10.1016/j.diamond.2025.112343 ↗
54. Growth mechanism and kinetics of diamond in liquid gallium from quantum mechanics molecular dynamics simulations10.1021/acsami.3c03314 ↗
55. Study on the mechanism of diamond graphite with the action of transition metals10.3901/JME.2016.20.023 ↗
56. The reaction mechanism and selectivity of acetylene hydrogenation over Ni-Ga intermetallic compound catalysts: a density functional theory study10.1039/C7DT04726F ↗
57. Study of Ni-catalyzed graphitization process of diamond by in situ X-ray photoelectron spectroscopy10.1021/acs.jpcc.7b12334 ↗
58. Tribochemistry of ultra-low friction fullerene-like carbon films in humid air10.1016/j.apsusc.2019.145040 ↗
59. Graphene nano scrolls responding to superlow friction of amorphous carbon10.1016/j.carbon.2017.01.106 ↗
60. Direct growth of multilayer graphene by precipitation using W capping layer10.7567/JJAP.55.100302 ↗
61. Fabrication, tribological properties and cutting performances of high-quality multilayer graded MCD/NCD/UNCD coated PCB end mills10.1016/j.diamond.2021.108505 ↗