Vacuum thermal activation-driven surface morphological evolution and hydrogen sorption kinetics of amorphous TiZrV non-evaporable getter films
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fusion materials and technologies · Hydrogen Storage and Materials · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. M.L. Stutzman, P.A. Adderley, M.A.A. Mamun, et al., Non-evaporable getter coating chambers for extreme high vacuum, 2014, Doi: 10.48550/arXiv.1803.07056.
2. Commissioning and operation status of the MAX IV 3 GeV storage ring vacuum system10.1107/S1600577521002599 ↗
3. On the synergy manipulation between the activation temperature, surface resistance and secondary electron yield of NEG thin films10.1016/j.apsusc.2021.152101 ↗
4. Development and characterization of non-evaporable getter thin films with Ru seeding layer for MEMS applications10.3390/mi9100490 ↗
5. In-situ electrical characterization of low temperature getter thin films activation10.1149/08616.0047ecst ↗
6. Miniature capacitance diaphragm gauge for absolute vacuum measurement10.1016/j.measurement.2022.110851 ↗
7. Microstructure and adsorption characteristics of Zr-Co-RE getter films deposited using krypton as sputtering gas10.1063/5.0152974 ↗
8. Pumping characteristics of Zr-V-Fe nonevaporable getter in mixture of H2 and CO gases10.3131/jvsj.37.5 ↗
9. Effect of the film thickness on pumping properties of Ti–Zr–V coating10.1016/j.nima.2022.166474 ↗
10. Preparation and sorption characteristics of Zr-Co-RE getter films10.1016/j.jallcom.2012.01.030 ↗
11. Hydrogen adsorption characteristics of Zr57V36Fe7 non-evaporable getters at low operating temperatures10.1016/j.vacuum.2018.04.038 ↗
12. P. Yuan, Y.Z. Sui, X. Zhang, et al., Preparation and characterization of Ni/ZrCoCe stack getter films. Materials Science Forum, 2019 Trans Tech Publications Ltd, Switzerland. 944 (2019) 619–624. Doi: 10.4028/www.scientific.net/MSF.944.619.10.4028/www.scientific.net/MSF.944.619 ↗
13. Temperature-dependent in situ studies of volatile molecule trapping in low-temperature-activated Zr alloy-based getters10.1021/acs.jpcc.6b11426 ↗
14. Single metal zirconium non-evaporable getter coating10.1016/j.vacuum.2020.109510 ↗
15. Pumping characteristics of the St707 nonevaporable getter (Zr 70 V 24.6-Fe 5.4 wt %)10.1116/1.580226 ↗
16. Ti–Zr–V non-evaporable getter films: from development to large scale production for the large hadron collider10.1016/j.tsf.2005.12.218 ↗
17. Decreasing surface outgassing by thin film getter coatings10.1016/S0042-207X(98)00017-7 ↗
18. A novel route to extreme vacua: the non-evaporable getter thin film coatings10.1016/S0042-207X(98)00377-7 ↗
19. Formation mechanism of passivation layer under air exposure on TiZrV non-evaporable getter film10.1021/acs.jpcc.3c05363 ↗
20. C. Scheuerlein, The activation of non-evaporable getters monitored by AES, XPS, SSIMS and secondary electron yield measurements, Master’s thesis, University of Surrey: Guildford, United Kingdom, 2002.
21. Prodromides · 2002
22. Cage effect of film mesoscopic structure on activation of TiZrHfV non-evaporable getter10.1016/j.vacuum.2024.113051 ↗
23. Unveiling the secrets of non-evaporable getter films: activation temperature, activation time, and achievable activation degree10.1016/j.jallcom.2024.175771 ↗
24. Lowering the activation temperature of Ti-Zr-V non-evaporable getter films by removing surface carbon contamination: an in situ XPS study10.1016/j.vacuum.2025.114063 ↗
25. Characterization of air-exposure/activation cycles of porous Ti–Zr–V getter film using synchrotron radiation photoemission spectroscopy10.1016/j.tsf.2009.01.087 ↗
26. Activation characterization of the Ti-Zr-V getter films deposited by magnetron sputtering10.1016/j.apsusc.2020.147059 ↗
27. Nonevaporable getter films for ultrahigh vacuum applications10.1116/1.580963 ↗
28. Lowering the activation temperature of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00243-8 ↗
29. First-principle investigation of hydrogen solubility and diffusivity in transition metal-doped vanadium membranes and their mechanical properties10.1016/j.jallcom.2019.07.063 ↗
30. C. Barcellin, Non-evaporable getter thin film coatings for vacuum applications, Master’s thesis, CERN: Geneve, Switzerland, 2014.
31. Residual surface oxide on ZrV getter—XPS, LEIS and SIMS study10.1016/j.vacuum.2003.12.144 ↗
32. XPS and SIMS study of the ageing mechanism of Zr–V non-evaporable getter films10.1016/j.apsusc.2004.05.125 ↗
33. Activation of binary Zr-V non-evaporable getters: synchrotron radiation photoemission study10.1016/j.apsusc.2004.09.049 ↗
34. Activation of binary Zr-V non-evaporable getters: a soft X-ray photoemission study of carbide formation10.1016/j.susc.2004.06.138 ↗
35. X-ray photoelectron spectroscopy and static secondary ion mass spectroscopy study of activation mechanism of Zr–V low activation temperature nonevaporable getter films10.1116/1.1562175 ↗
36. Mechanism of non-evaporable getter activation XPS and static SIMS study of Zr44V56 alloy10.1016/S0042-207X(02)00756-X ↗
37. XPS analysis of the getter mechanism and getter activation process10.1016/0042-207X(90)94137-F ↗
38. The study of different structuring techniques for creation of non-evaporable getters
39. Testing the activation temperature of non-evaporable Ti-Zr-Hf-V getter films by XPS10.1016/j.nima.2020.163864 ↗
40. The activation of Ti-Zr-V-Hf non-evaporable getter films with open-cell copper metal foam substrates10.3390/ma13204650 ↗
41. Non-evaporable getter Ti-V-Hf-Zr film coating on laser-treated aluminum alloy substrate for electron cloud mitigation10.3390/coatings9120839 ↗
42. Pumping properties of Ti-Zr-Hf-V non-evaporable getter coating10.1016/j.vacuum.2013.07.035 ↗
43. Efficient combination of surface texturing and functional coating for very low secondary electron yield surfaces and rough nonevaporable getter films10.1002/admi.202201671 ↗
44. Characterization of Ti–Zr–V thin films deposited by DC and unipolar pulsed DC magnetron sputtering10.1016/j.vacuum.2021.110200 ↗
45. Activation and pumping characteristics of Ti–Zr–V films deposited on narrow tubes10.1007/s41365-021-00880-4 ↗
46. Comparative study of Ar-implanted Ti-Zr-V non-evaporable getter films on the Al-alloy substrate
47. Synthesis of Ti-Zr-V non-evaporable getter thin films grown on Al alloy and CuCrZr alloy10.4028/www.scientific.net/KEM.730.87 ↗
48. Comparison of Ti-Zr-V nonevaporable getter films deposited using alloy or twisted wire sputter-targets10.1116/1.3504600 ↗
49. Activation characterization of non-evaporable Ti-Zr-V getter films by synchrotron radiation photoemission spectroscopy10.1016/j.tsf.2007.06.102 ↗
50. Influence of deposition pressure and pulsed dc sputtering on pumping properties of Ti–Zr–V nonevaporable getter films10.1116/1.3112623 ↗
51. Surface characterization of activated Ti-Zr-V NEG coatings10.1016/j.vacuum.2008.08.002 ↗
52. Oxygen-adsorption characterization of activated non-evaporable Ti–Zr–V getter films by synchrotron radiation photoemission spectroscopy10.1016/j.tsf.2007.07.157 ↗
53. Characterization of activated non-evaporable porous Ti and Ti-Zr-V getter films by synchrotron radiation photoemission spectroscopy10.1016/j.tsf.2006.07.052 ↗
54. XPS and ESD study of carbon and oxygen chemistry on TiZrV NEG10.1016/S0042-207X(00)00469-3 ↗
55. XPS analysis of the activation process in non-evaporable getter thin films10.1002/1096-9918(200008)30:1<623::AID-SIA719>3.0.CO;2-Y ↗
56. Preparation andcharacterization ofTi–Zr–V–Cu getter films10.1007/s41605-024-00449-w ↗
57. Laser scanning patterns induced surface properties variations of Ti-V-Hf-Zr non-evaporable getter film with 316L stainless steel substrates10.1016/j.vacuum.2024.113639 ↗
58. Effect of thermal cycling on microstructure and adhesion properties of Ti-Zr-V thin films10.1016/j.apsusc.2023.159239 ↗
59. Effect of atomic-scale microstructures on TiZrV non-evaporable getter film activation10.1116/6.0002992 ↗
60. Structure and properties of ZrCoCe getter film with Pd protection layer10.1007/s12598-020-01522-1 ↗
61. Analysis of a non-evaporable getter of Ti-Al-Zr thin film with enhanced performance used for ultra-high vacuum generation10.3938/jkps.75.373 ↗
62. Characterization and evaluation of Ti-Zr-V non-evaporable getter films used in vacuum systems10.1016/j.phpro.2012.03.644 ↗
63. Microstructures, surface areas, and oxygen absorption of Ti and Ti–Zr–V films grown using glancing-angle sputtering10.1557/JMR.2008.0076 ↗
64. Influence of the substrate coating temperature on the vacuum properties of Ti–Zr–V non-evaporable getter films10.1016/S0042-207X(02)00755-8 ↗
65. The nature of glass remains anything but clear
66. The nature and properties of amorphous matter
67. Short-range structure for amorphous intertransition metal alloys10.1038/278700a0 ↗
68. Hydrogen dissociation on metal surfaces—a model system for reactions on surfaces10.1007/s003390050834 ↗
69. Hydrogen adsorption, absorption and diffusion on and in transition metal surfaces: a DFT study10.1016/j.susc.2011.12.017 ↗
70. Thermodynamics of hydrogen adsorption on ruthenium fcc surfaces: a density functional theory study10.1039/D4CP04165H ↗
71. Effects of alloying element on hydrogen adsorption and diffusion on α-Fe(110) surfaces: first principles study10.3390/met14050487 ↗
72. C.Y. Li, S. Tosoni, Tuning the properties of metal surfaces by alloying: a DFT study of H2, O2, and H2O adsorption on Ni-Fe surfaces. Doi: arxiv-2410.19608.
73. Impact of alloy elements on the adsorption and dissociation of gaseous hydrogen on surfaces of Ni–Cr–Mo steel10.3390/pr11113241 ↗
74. Multihyperuniform long-range order in medium-entropy alloys10.1016/j.actamat.2023.118678 ↗
75. Molecular simulation on CO2 disaggregation of methane dry reforming reaction (in Chinese)
76. Pumping performance evaluation and electron microscope observation of ICF203 zero-length fin-type nonevaporable getter pumps deposited with oxygen-free Pd/Ti
77. Water vapour sorption characteristics of a non-evaporable getter pump10.1016/0042-207X(93)90136-X ↗
78. Chemical pumping in vacuum technology
79. Combination of a getter pump with turbomolecular pumps in UHV applications10.1016/S0042-207X(99)00120-7 ↗
80. New high capacity getter for vacuum insulated mobile LH2 storage tank systems10.1016/j.vacuum.2007.07.063 ↗
81. Robustness of ZAO based NEG pump solutions for fusion applications10.1016/j.fusengdes.2021.112306 ↗
82. X.Q. Ge, Y.G. Wang, Y.X. Zhang, et al., Deposition and characterization of tizrhfv films by dc magnetron sputtering, in: 9th International Particle Accelerator Conference IPAC2018, Vancouver, BC, Canada, JACoW Publishing. Doi: 10.18429/JACoW-IPAC2018-THPML129.
83. Construction of simple non-evaporable getter assemblies using St 707 strips or St 172 modules10.3131/jvsj2.55.21 ↗
84. Use of combined sputter ion and NEG pumps in the heavy ion medical machine10.1016/j.vacuum.2015.01.011 ↗
85. Deposition and characterization of Ti-Zr-V non-evaporable getter films10.1016/j.phpro.2012.03.639 ↗
86. A new pumping approach for the large electron positron collider (LEP)10.1016/0167-5087(83)90003-0 ↗
87. Getter embedding carbon nanotube cathode for large–area field–emission display10.1143/JJAP.48.076504 ↗
88. Preparation and characterization of non-evaporable porous Ti–Zr–V getter films10.1016/j.surfcoat.2006.08.018 ↗
89. Influence of the sputtering glancing angle on the microstructure and adsorption characteristics of Zr-Co-RE getter films10.1088/2053-1591/ab7968 ↗
90. Reducing the incorporation of contaminant oxygen in decorative TiN coatings deposited by low temperature reactive sputtering10.1016/j.vacuum.2024.113325 ↗
91. Lofgran · 2013
92. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
93. Deposition of TiZrV coatings onto inner wall of stainless steel pipe by DC magnetron sputtering (in Chinese)10.3788/HPLPB20102209.2124 ↗
94. Time-resolved probe diagnostics of pulsed DC magnetron discharge during deposition of TiOx layers10.1016/j.surfcoat.2006.04.013 ↗
95. Influence of target current on structure and performance of Cu films deposited by oscillating pulse magnetron sputtering10.3390/coatings12030394 ↗
96. W.M. Posadowski, Plasma parameters of very high target power density magnetron sputtering, 392, 201–207 (2001), Doi: 10.1016/S0040-6090(01)01028-8.10.1016/S0040-6090(01)01028-8 ↗
97. Effect of magnetic field strength on deposition rate and energy flux in a dc magnetron sputtering system10.1116/1.3222874 ↗
98. Influence of deposition pressure, substrate temperature and substrate outgassing on sorption properties of Zr-Co-Ce getter films10.1016/j.jallcom.2015.11.208 ↗
99. Meng · 2009
100. MKS Instruments Inc. Gas Correction Factors for Ionization Vacuum Gauges, https://www.mks.com/n/gas-correction-factors-for-ionization-vacuum-gauges?utm_source=chatgpt.com (accessed 19 October 2025).