Electronic descriptors enable rational selection of plasma etching resistance in rare-earth oxide ceramics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. AI and memory wall10.1109/MM.2024.3373763 ↗
2. Y. Ma, Y. Du, L. Du, J. Lin, Z. Wang, In-Memory Computing: The Next-Generation AI Computing Paradigm, in: Proceedings of the 2020 on Great Lakes Symposium on VLSI, ACM, Virtual Event China, 2020: pp. 265–270. doi: 10.1145/3386263.3407588.10.1145/3386263.3407588 ↗
3. Advanced packaging technologies in memory applications for future generative AI Era
4. On the control of plasma parameters and active species kinetics in CF4+O2+Ar gas mixture by CF4/O2 and O2/Ar mixing ratios10.1007/s11090-017-9820-z ↗
5. Investigation of SiO2 etch characteristics by C6F6/Ar/O2 plasmas generated using inductively coupled plasma and capacitively coupled plasma10.3390/ma15041300 ↗
6. Plasma resistant glass (PRG) for reducing particulate contamination during plasma etching in semiconductor manufacturing: a review
7. Plasma etching behavior of Y2O3 ceramics: comparative study with Al2O310.1016/j.apsusc.2016.01.092 ↗
8. T. Moriya, T. Murakami, H. Nakayama, H. Nagaike, E. Sugawara, Y. Kobayashi, M. Shimada, K. Okuyama, Reduction of particle contamination in an actual plasma etching process, in: ISSM 2005, IEEE International Symposium on Semiconductor Manufacturing, 2005., 2005: pp. 229–232. doi: 10.1109/ISSM.2005.1513343.10.1109/ISSM.2005.1513343 ↗
9. Instantaneous generation of many flaked particles by impulsive force of electric field stress acting on inner wall of mass-production plasma etching equipment10.7567/JJAP.52.066201 ↗
10. Effect of porosity on etching rate and crater-like microstructure of sintered Al2O3, Y2O3, and YAG ceramics in plasma etching10.1016/j.ceramint.2024.01.436 ↗
11. Effect of the microstructures of yttria ceramics on their plasma corrosion behavior10.1016/j.ceramint.2019.07.093 ↗
12. Fluorination mechanisms of Al2O3 and Y2O3 surfaces irradiated by high-density CF4∕O2 and SF6∕O2 plasmas10.1116/1.3112624 ↗
13. The erosion behaviors of Y2O3 and YF3 coatings under fluorocarbon plasma10.1016/j.tsf.2011.04.049 ↗
14. Fabrication and plasma resistance properties of transparent YAG ceramics10.1016/j.ceramint.2011.11.023 ↗
15. Physiochemical etching characteristics and surface analysis of Y2O3-MgO nanocomposite under different CF4/Ar/O2 plasma atmospheres10.1016/j.apsusc.2023.158483 ↗
16. Remarkable plasma-resistance performance by nanocrystalline Y2O3·MgO composite ceramics for semiconductor industry applications
17. Microstructural characterization and inductively coupled plasma-reactive ion etching resistance of Y2O3–Y4Al2O9 composite under CF4/Ar/O2 mixed gas conditions
18. Zirconia-strengthened yttria ceramics for plasma chamber applications10.1016/j.ceramint.2020.11.085 ↗
19. Influence of microstructure control on optical and mechanical properties of infrared transparent Y2O3-MgO nanocomposite10.1016/j.jeurceramsoc.2017.05.049 ↗
20. Nanocomposite coatings for anti-corrosion properties of metallic substrates10.3390/ma16145092 ↗
21. Plasma etching resistance and mechanical properties of polymorph Gd2O3-MgO nanocomposite with Zr phase stabilizer incorporation10.1016/j.apsusc.2024.160890 ↗
22. Novel transparent high-entropy sesquioxide ceramics with high physicochemical plasma etching resistance10.26599/JAC.2024.9221013 ↗
23. Research progress of non-oxide and high entropy ceramic coatings10.33142/rams.v6i1.12889 ↗
24. Correlation with the microstructure and synergistic physiochemical etching resistance of nanocomposites under fluorine-containing plasma conditions10.1021/acsami.2c12311 ↗
25. Lu2O3: a promising ultrawide bandgap semiconductor for deep UV photodetector10.1063/5.0048752 ↗
26. A review of band structure and material properties of transparent conducting and semiconducting oxides: Ga2O3, Al2O3, In2O3, ZnO, SnO2, CdO, NiO, CuO, and Sc2O310.1063/5.0078037 ↗
27. Silicon flower structures by maskless plasma etching10.1016/j.heliyon.2023.e22792 ↗
28. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
29. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
30. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
31. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
32. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
33. Electronic factors determining the reactivity of metal surfaces10.1016/0039-6028(96)80007-0 ↗
34. Structural investigations of Lu2O3 as single crystal and polycrystalline transparent ceramic10.1021/cg500225v ↗
35. Growth, spectroscopic properties, and energy levels of Cr3+ doped LuScO3 crystal10.1364/OME.461640 ↗
36. Spectroscopic characterization of Yb3+-doped sesquioxide transparent ceramics10.1016/j.jlumin.2024.120830 ↗
37. Erosion behavior of Y2O3 in fluorine‐based etching plasmas: Orientation dependency and reaction layer formation10.1111/jace.17556 ↗
38. Erosion resistance of Y2O3 ceramics in CF4 etching plasma: Microstructural evolution and mechanical properties10.1016/j.apsusc.2024.160509 ↗
39. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
40. First thin-disk oscillator with ceramic Yb:LuScO3 in comparison to the operation with ceramic Yb:Lu2O310.1007/s00340-024-08231-y ↗
41. Spectroscopy and laser operation of highly-doped 10at.% Yb:(Lu,Sc)2O3 ceramics10.1016/j.optmat.2021.111128 ↗
42. Study of silicon surface micro‐roughness generated by SF6 remote plasma etching10.1002/sia.7198 ↗
43. Effects of grain size and crystallographic orientation on plasma etching behavior in tungsten carbide10.1016/j.jeurceramsoc.2025.117444 ↗
44. Effects of artificial pores and purity on the erosion behaviors of polycrystalline Al2O3 ceramics under fluorine plasma10.2109/jcersj2.117.863 ↗
45. Atomic and electronic structures of lutetium oxide Lu2O310.1134/S1063776113020131 ↗
46. Chemical bonding effects in Sc compounds studied using X-ray absorption and X-ray photoelectron spectroscopies10.1039/D3CP04108E ↗
47. Lieberman · 2005
48. Review of inductively coupled plasmas: Nano-applications and bistable hysteresis physics10.1063/1.5012001 ↗
49. Recent progress in relaxor ferroelectrics with perovskite structure10.1007/s10853-005-5915-7 ↗
50. Observation of the floating sheath distribution on Al2O3 and silicon targets adjacent to a DC biased metal substrate10.1016/j.cap.2024.01.014 ↗
51. Effect of impurities in vacuum vessels on the plasma parameters in inductive discharges10.1016/j.vacuum.2023.112330 ↗
52. Dielectric relaxation spectroscopy for the characterization of ion transport in solid polymer electrolytes in Li-ion cells10.1016/j.electacta.2023.142759 ↗
53. Wearable, washable and ultra-high environmental tolerant solid-liquid composite sensor based on IL@PU microcapsules10.1016/j.coco.2022.101329 ↗
54. Bond synergy model for bond energies in alloy oxides10.1149/1945-7111/abc6c7 ↗
55. Changing the activity of electrocatalysts for oxygen reduction by tuning the surface electronic structure10.1002/anie.200504386 ↗
56. Sputtering by ion bombardment theoretical concepts, in: Topics in Applied Physics, Springer Berlin Heidelberg, Berlin, Heidelberg, 1981: pp. 9–71. doi: 10.1007/3540105212_7.10.1007/3540105212_7 ↗