On the surface energy of the Cantor alloy and its relation with surface composition
Source abstract
Abstract
The relatively novel family of materials known as high entropy alloys, popular for exceptional mechanical properties, is currently gaining increasing attention also for remarkable surface properties. Nevertheless, due to the intrinsic difficulties that these materials pose to first-principle modelling, there is a lack of knowledge and understanding of the basics principles that govern their surface energetics. In this work the surface energy of the Cantor alloy was systematically investigated by means of density functional theory within a supercell approach that allows to tackle the effects of local atomic distributions. When properly accounting for the effective simulation slab stoichiometry the Cantor alloy surface energy displays an average value of 1.77 J/m 2 , ranging between 1.65 J/m 2 and 1.95 J/m 2 . Such values for the Cantor alloy’s surface energy are well below those of its constituents also taking into account their variability, supporting the use of this material as anti-corrosion coating. Finally, by well assessing a slab total energy decomposition, required to account for the overall slab stoichiometry, an expression is derived which allows to infer the HEA surface energy, for any bulk configuration and surface termination, avoiding slab calculations. • Cantor alloy surface energies are computed tackling the effects of local atomic distributions. • Cantor alloy low surface energies confirm its potential as anti-corrosion coating. • HEA surface energy is inferred just from the bulk calculations and surface composition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · High Entropy Alloys Studies · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating10.1016/j.apsusc.2016.11.176 ↗
2. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
3. A review on high entropy alloys coatings: Fabrication processes and property assessment10.1002/adem.201900343 ↗
4. Wettability, electron work function and corrosion behavior of CoCrFeMnNi high entropy alloy films10.1016/j.surfcoat.2020.126222 ↗
5. A ductility criterion for bcc high entropy alloys10.1016/j.jmps.2021.104389 ↗
6. Quantitative prediction of surface energy of high-entropy-alloys based on intrinsic descriptors10.1016/j.surfin.2023.103442 ↗
7. Screening of generalized stacking fault energies, surface energies and intrinsic ductile potency of refractory multicomponent alloys10.1016/j.actamat.2021.116800 ↗
8. Surface segregation in Cr-Mn-Fe-Co-Ni high entropy alloys10.1016/j.apsusc.2020.147471 ↗
9. High-entropy alloys as catalysts for the CO2 and CO reduction reactions10.1021/acscatal.9b04343 ↗
10. Density functional theory-machine learning characterization of the adsorption energy of oxygen intermediates on high-entropy alloys made of earth-abundant metals10.1021/acs.jpcc.3c03404 ↗
11. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
12. Niu · 2016 · 333
13. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
14. King · 2016
15. Formation and structure of V–Zr amorphous alloy thin films10.1016/j.actamat.2014.10.016 ↗
16. Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys10.1016/j.actamat.2022.117693 ↗
17. Magnetically-driven phase transformation strengthening in high entropy alloys10.1038/s41467-018-03846-0 ↗
18. Coey · 2009
19. The materials project: A materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
20. Extracting convergent surface energies from slab calculations
21. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
22. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
23. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
24. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
27. The effect of al addition on solid solution strengthening in CoCrFeMnNi: Experiment and modelling10.1016/j.actamat.2022.118208 ↗
28. First-principles study of hydrogen-vacancy interactions in CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2022.166259 ↗
29. Local nanostructure in multicomponent high-entropy materials10.1007/s44210-024-00040-4 ↗
30. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
31. Surface energies of elemental crystals10.1038/sdata.2016.80 ↗
32. The cobalt transformation10.1016/0001-6160(60)90088-2 ↗
33. Performance comparison of r2SCAN and SCAN metaGGA density functionals for solid materials via an automated, high-throughput computational workflow
34. The surface energy and stress of metals10.1016/j.susc.2018.03.008 ↗
35. Trends of the surface relaxations, surface energies, and work functions of the 4d transition metals10.1103/PhysRevB.46.4816 ↗
36. Electronic structure of materials
37. Predictive structure–reactivity models for rapid screening of Pt-based multimetallic electrocatalysts for the oxygen reduction reaction10.1021/cs200462f ↗
38. An effective scheme to determine surface energy and its relation with adsorption energy10.1016/j.actamat.2021.116895 ↗
39. Dynamical mean-field theory of electronic correlations in models and materials10.1063/1.3518901 ↗
40. Bonds broken at atomically flat crystal surfaces—I: Face-centred and body-centred cubic crystals10.1016/0022-3697(62)90001-X ↗
41. On the corrosion resistance of the CoCrFeMnNi high entropy alloys in chloride-containing sulfuric acid solutions10.1016/j.apsusc.2024.161487 ↗
42. Modeling grain boundary and surface segregation in multicomponent high-entropy alloys
43. Surface segregation in Cr-Mn-Fe-Co-Ni high entropy alloys10.1016/j.apsusc.2020.147471 ↗
44. The (110) and (320) surfaces of a Cantor alloy10.1016/j.actamat.2021.116790 ↗
45. First principles study of surface stability and segregation of PdRuRh ternary metal alloy system10.1016/j.susc.2018.02.005 ↗