Influence of laser shaping of the topography of NiCrAlY sinters on the surface oxidation mechanism under high-temperature conditions
Source abstract
Abstract
• free-cooling during laser treatment form the fine-grain subsurface of NiCrAlY alloy. • laser microtexturing alters the oxidation mechanism of NiCrAlY alloy. • alternative oxidation mechanism promotes formation of Cr oxides instead of α-Al 2 O 3. • epitaxial growth of CrNi 2 O 4 in NiO results in the volumetric expansion of oxides. This work presents the idea of functionalization of bond coat surface in thermal barrier coatings technology. The laser surface shaping not only topographically alters the surface but also affects the interfacial behaviors in multilayer coating systems, significantly impacting e.g. high-temperature oxidation mechanisms. In this study, NiCrAlY powder was sintered and then laser microtextured. The free-standing sinters with six various topographies were then exposed to isothermal oxidation at 1100 °C and the dwell-time in range of 1 to 168 h. The further microstructural studies were aimed at exploring the correlation between microtexturing parameters, the resulting topography, and high-temperature oxidation mechanisms. The topographical evolution of the laser-treated sinters was analyzed using a scanning electron microscopy and confocal microscopy. Additionally, high-resolution electron microscopy coupled with in-situ focused ion beam etching and energy-dispersive spectroscopy, as well as electron backscatter diffraction were utilized to examine the migration of chemical elements and the final composition of thermally grown oxides, while x-ray diffraction was used to investigate surface oxide formations. The observations revealed that laser surface processing results in fine subsurface microstructure related to rapid free-cooling. Microstructural changes further affected the high-temperature behavior of NiCrAlY powder by altering the oxidation kinetics and oxide formation during isothermal oxidation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Thermal barrier coatings for aircraft engines: history and directions10.1007/BF02646310 ↗
2. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
3. Thermal-barrier coatings for more efficient gas-turbine engines10.1557/mrs.2012.232 ↗
4. A perspective on thermally sprayed thermal barrier coatings: current status and trends10.1007/s11666-022-01330-2 ↗
5. A.C. Karaoglanli, K.M. Doleker, Y. Ozgurluk, State of the Art Thermal Barrier Coating (TBC) Materials and TBC Failure Mechanisms, in: A. Öchsner, H. Altenbach (Eds.), Properties and Characterization of Modern Materials, Springer, Singapore, 2017: pp. 441–452. DOI: 10.1007/978-981-10-1602-8_34.10.1007/978-981-10-1602-8_34 ↗
6. Oxidation failure of TBC systems: an assessment of mechanisms10.1016/j.surfcoat.2011.05.053 ↗
7. Improvement of strain tolerance of functionally graded TBCs through laser surface micro-texturing10.1007/s10853-016-0363-0 ↗
8. Performance of single YSZ, Gd2Zr2O7 and double-layered YSZ/Gd2Zr2O7 thermal barrier coatings in isothermal oxidation test conditions10.1016/j.vacuum.2020.109401 ↗
9. The art of laser ablation in aeroengine: the crown jewel of modern industry10.1063/1.5134813 ↗
10. Combining effects of ablation laser and laser preheating on metallic substrates before thermal spraying10.1016/j.surfcoat.2008.04.038 ↗
11. Laser textured titanium surface characterization10.1016/j.apsusc.2022.152807 ↗
12. High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate10.1016/j.surfcoat.2018.01.006 ↗
13. Improvement of thermal plasma sprayed coating adhesion strength by laser microtexturing of aluminum10.1007/s00170-023-10859-7 ↗
14. Laser surface texturing (LST) treatment before thermal spraying: a new process to improve the substrate-coating adherence10.1016/j.surfcoat.2010.07.044 ↗
15. Laser microtexturing of NiCrAlY coated nickel-based superalloy for improved adhesion bond strength
16. Laser patterning pretreatment before thermal spraying: a technique to adapt and control the surface topography to thermomechanical loading and materials10.1007/s11666-015-0352-x ↗
17. On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates10.1080/09276440.2023.2235804 ↗
18. Enhancing coating adhesion on fibre-reinforced composite by femtosecond laser texturing10.3390/coatings13050928 ↗
19. Control of the mesostructure of suspension plasma-sprayed coating with laser surface texturing: application to TBC10.1007/s11666-019-00835-7 ↗
20. Effect of processing parameters on MCrAlY bondcoat roughness and lifetime of APS–TBC systems10.1016/j.surfcoat.2014.06.075 ↗
21. Effects of laser-structured and APS flash-coated CoNiCrAlY bondcoats on the furnace cycle lifetime of double-layered Y2O3-stabilized ZrO2/MgAl2O4 abradable coatings10.1016/j.surfcoat.2023.129513 ↗
22. L. Després, S. Costil, F. Mauget, R. Cariou, A. Joulia, L.M. Suave, J. Cormier, Laser Surface Texturing to Improve EB-PVD Thermal Barrier Coating Adhesion, in: Science & Technology Organization, 2022: pp. 1–15. DOI: 10.14339/STO-MP-AVT-356-22-PDF.
23. The influence of substrate topography on the plasma jet flow in the substrate boundary layer under suspension plasma spray conditions: a numerical approach10.1007/s11666-022-01336-w ↗
24. The behavior of plasma sprayed thermal barrier coating with laser microtextured bond coat under high temperature testing10.1016/j.surfcoat.2022.129095 ↗
25. Microstructure and oxidation resistance of laser remelted plasma sprayed nicraly coating10.1515/amm-2016-0197 ↗
26. Niemiec · Arch. Metall. Mater. · 2015 · 60 · 267110.1515/amm-2015-0431 ↗
27. Study of the effect of laser treatment on the initial oxidation behaviour of Al-coated NiCrAlY bond-coat10.1002/sia.5307 ↗
28. Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems10.1179/026708304225012143 ↗
29. On the high-temperature oxidation of MCrAlY coatings10.3139/146.110201 ↗
30. Alumina scale growth at zirconia-MCrAlY interface: a microstructural study10.1007/BF02403637 ↗
31. The characteristics of alumina scales formed on HVOF-sprayed MCrAlY coatings10.1023/A:1004586814837 ↗
32. Isothermal oxidation of air plasma spray NiCrAlY bond coatings10.1016/S0257-8972(01)01557-2 ↗
33. The effects of alloy microstructure refinement on the short-term thermal oxidation of NiCoCrAlY alloys10.1007/s11661-006-0040-z ↗
34. Effect of surface condition on the oxidation behaviour of MCrAlY coatings
35. A. Zakeri, E. Bahmani, A. Sabour Rouh Aghdam, B. Saeedi, A comparative study on the microstructure evolution of conventional and nanostructured MCrAlY powders at high-temperature, Surface and Coatings Technology 389 (2020) 125629. DOI: 10.1016/j.surfcoat.2020.125629.10.1016/j.surfcoat.2020.125629 ↗
36. Improvement of the oxidation resistance of NiCrAlY coatings by the addition of rhenium10.1016/j.surfcoat.2006.02.009 ↗
37. Comparison of microstructure and oxidation behavior of NiCoCrAlYSi laser cladding coating before and after high-current pulsed electron beam modification10.1016/j.jallcom.2021.160651 ↗
38. The role of oxide microstructure and growth stresses in the high-temperature scaling of nickel10.1007/BF02642020 ↗
39. Comparison of microstructures and oxidation behaviors of ytria and magnesia stabilized zirconia thermal barrier coatings (TBC)10.17222/mit.2017.150 ↗
40. T. Kiełczawa, P. Sokołowski, H. Myalska-Głowacka, G. Moskal, A. Denoirjean, A. Ion, Isothermal Oxidation Behavior of MCrAlY Bond Coats after Laser Microtexturing, in: Québec City, Canada, 2023: pp. 633–639. DOI: 10.31399/asm.cp.itsc2023p0633.10.31399/asm.cp.itsc2023p0633 ↗
41. Effect of high temperature oxidation on Inconel 718 and Inconel 718/YSZ/Gd2Zr2O710.1088/2053-1591/ab26d8 ↗
42. Subsurface cooling rates and microstructural response during laser based metal additive manufacturing10.1038/s41598-020-58598-z ↗
43. Evaluating laser surface melting of NiCrAlY-APS coating and its effect on high-temperature oxidation behavior of NiCrAlY/YSZ thermal barrier coating before and after surface melting10.1016/j.heliyon.2023.e23094 ↗
44. Laser polishing of additive manufactured superalloy10.1016/j.procir.2018.05.088 ↗
45. Grain size manipulation by wire laser direct energy deposition of 316L with ultrasonic assistance10.2351/7.0001090 ↗
46. Correlations between high-temperature oxidation kinetics and thermal radiation characteristics of micro-structured nickel surfaces oxidized at 1173 K10.3390/met9010017 ↗
47. F. Ghadami, A. Sabour Rouh Aghdam, A. Zakeri, B. Saeedi, P. Tahvili, Synergistic effect of CeO2 and Al2O3 nanoparticle dispersion on the oxidation behavior of MCrAlY coatings deposited by HVOF, Ceramics International 46 (2020) 4556–4567. DOI: 10.1016/j.ceramint.2019.10.184.10.1016/j.ceramint.2019.10.184 ↗
48. High temperature oxidation of NiCrAlY coated Alloy 625 manufactured by selective laser melting10.1016/j.surfcoat.2020.126041 ↗
49. The lateral growth strain accompanying the formation of a thermally grown oxide10.1016/S1359-6454(02)00532-3 ↗
50. Alumina grown during deposition of thermal barrier coatings on NiCrAlY10.1111/j.1151-2916.2003.tb03357.x ↗
51. The oxidation properties of a NiCrAlY coating fabricated by arc ion plating10.3390/coatings13010022 ↗
52. The effect of bond coat oxidation on the microstructure and endurance of a thermal barrier coating system10.3184/096034009X12506031843394 ↗
53. Ellingham Diagrams, (2025). http://web.mit.edu/2.813/www/readings/Ellingham_diagrams.pdf (accessed July 24, 2025).
54. Some limiting factors in the use of alloys at high temperatures10.1007/BF00603485 ↗
55. Study on the microstructure and high-temperature oxidation performance of β-NiAl/γ′-Ni3Al intermetallic compounds fabricated by laser metal deposition10.3390/met13081461 ↗
56. Mechanical, tribological, and oxidation resistance properties of NiCrAlY coating by atmospheric plasma spraying10.3389/fmats.2019.00067 ↗
57. Thermal expansion and microstructure evolution of atmospheric plasma sprayed NiCrAlY bond coat using in-situ high temperature X-ray diffraction10.1016/j.surfcoat.2022.129132 ↗
58. The effect of grain size on the oxidation of NiCoCrAlY10.1016/j.apsusc.2014.02.056 ↗
59. Effect of chemical compositions and surface morphologies of MCrAlY coating on its isothermal oxidation behavior10.1007/s11666-010-9590-0 ↗
60. The oxidation behaviour of sprayed MCrAlY coatings10.1016/S0257-8972(96)03039-3 ↗
61. Synthesis and oxidation behavior of nanocrystalline MCrAlY bond coatings10.1361/10599630522693 ↗
62. The oxidation behaviour of NiAl-I
63. Oxide scale formation on an MCrAlY coating in various H2-H2O atmospheres10.1016/0257-8972(95)02665-7 ↗
64. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
65. Oxidation of alloys involving noble metals10.1149/1.2430159 ↗
66. Effect of microstructure on early oxidation of MCrAlY coatings10.1016/j.actamat.2018.08.018 ↗
67. Effect of pre-heat-treatment on the oxidation resistance of MCrAlY coatings: a review10.3390/coatings13071222 ↗
68. Effects of Bond-Coat Preoxidation and Surface Finish on Isothermal and Cyclic Oxidation