Gold-Enriched titania nanotubes via layered film anodization: Optimized annealing for photoelectrochemical efficiency
Source abstract
Abstract
We present semitransparent electrodes fabricated by anodizing a thin film formed from alternating layers of sputtered titanium and co-sputtered titanium-gold, with varying Au content in each sample, resulting in formation of aligned oxide nanotubes. As-anodized materials were annealed under two distinct conditions: air and hydrogen atmosphere. Raman spectra obtained for prepared materials confirm the presence of anatase phase, while UV–vis spectra also reveal that the absorption band is shifted towards visible range beyond 400 nm. Furthermore, a reduction in energy band-gap is observed in comparison to bare titania materials for both annealing conditions. Air-annealed samples demonstrate improved anodic current densities, particularly favoring oxygen evolution reactions up to 2.7 mA cm −2 at + 1.0 V vs. Ag/AgCl/0.1 M KCl for sample with 2.35 at.% Au content. In contrast, among hydrogen-annealed materials, sample with 0.96 at.% Au content exhibits the highest photoactivity, achieving a photocurrent density of 640 µA cm −2 at + 0.5 V vs. Ag/AgCl/0.1 M KCl, substantially greater than that of bare titania reference material. Moreover, incident photon-to-electron conversion efficiency for this sample reaches approximately 7.9 %, compared to a peak value of 5.9 % for hydrogenated bare titania. These results highlight the potential of semitransparent electrode materials for advanced photoelectrochemical applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. TiO2 nanotubes for dye‐sensitized solar cells—a review10.1002/ese3.831 ↗
2. Synthesis of anodic TiO2 nanotubes on indium tin oxide coated glass electrodes10.1002/er.8667 ↗
3. Enhanced photocatalytic activity of hydrogenated and vanadium doped TiO2 nanotube arrays grown by anodization of sputtered Ti layers10.1016/j.apsusc.2017.11.253 ↗
4. The anodization of thin titania layers as a facile process towards semitransparent and ordered electrode material10.3390/nano12071131 ↗
5. Panaitescu, E.; Menon, L. Titania Nanotubes: Synthesis and Applications. https://www.sigmaaldrich.com/PL/pl/technical-documents/technical-article/materials-science-and-engineering/photovoltaics-and-solar-cells/titania-nanotubes-synthesis-and-applications (accessed 2024-06-27).
6. A review on the fabrication and characterization of Titania nanotubes obtained via electrochemical anodization10.3390/surfaces5040033 ↗
7. Double-sided semitransparent titania photoelectrode with enhanced light harvesting10.1016/j.rser.2024.114390 ↗
8. Towards photovoltaic windows: scalable fabrication of semitransparent modules based on non-fullerene acceptors via laser-patterning10.1039/D0TA02994G ↗
9. Transparent photovoltaic-based photocathodes for see-through energy systems10.1016/j.jpowsour.2022.232009 ↗
10. Semiconductor thin film based metasurfaces and metamaterials for photovoltaic and photoelectrochemical water splitting applications10.1002/adom.201900028 ↗
11. Tin oxide for optoelectronic, photovoltaic and energy storage devices: a review10.1039/D1TA01291F ↗
12. Fluorine doped tin oxide as an alternative of indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices10.1063/1.5104333 ↗
13. A brief review of transparent conducting oxides (TCO): the influence of different deposition techniques on the efficiency of solar cells10.3390/nano13071226 ↗
14. Functional fluorine-doped tin oxide coating for opto-electrochemical label-free biosensors10.1016/j.snb.2022.132145 ↗
15. The formation of micrometer-long TiO2 nanotube arrays by anodization of titanium film on conducting glass substrate10.1088/2043-6262/2/4/045002 ↗
16. Transparent Titania nanotubes of micrometer length prepared by anodization of titanium thin film deposited on ITO10.1016/j.apsusc.2011.02.087 ↗
17. Thin Film deposition methods: a critical review10.22214/ijraset.2021.36154 ↗
18. Unleashing the potential of industry viable roll-to-roll compatible technologies for perovskite solar cells: challenges and prospects10.1016/j.mattod.2024.06.013 ↗
19. Recent advances on the Deposition of Thin Film Solar Cells.
20. Effect of the Anodization Parameters on TiO2 Nanotubes Characteristics Produced in Aqueous Electrolytes with CMC10.1016/j.apsusc.2018.11.097 ↗
21. Intrinsic Au-decoration on anodic TiO2 nanotubes grown from metastable Ti–Au sputtered alloys—high density co-catalyst decoration enhances the photocatalytic H2 evolution10.1016/j.apmt.2018.11.009 ↗
22. Photoelectrochemical and electrochemical activity of anodic semitransparent aligned and spaced titania nanotubes formed out of titanium–silver alloys10.1021/acsanm.3c04186 ↗
23. TiO2 nanotubes with tunable morphology, diameter, and length: synthesis and photo-electrical/catalytic performance10.1021/cm802384y ↗
24. The growth of TiO2 nanotubes from sputter-deposited Ti film on transparent conducting glass for photovoltaic applications10.1016/j.vacuum.2014.12.024 ↗
25. General strategy for fabricating transparent TiO2 nanotube arrays for dye-sensitized photoelectrodes: illumination geometry and transport properties10.1021/nn200440u ↗
26. Influence of a sputtered compact TiO2 layer on the properties of TiO2 nanotube photoanodes for solid-state DSSCs10.1016/j.matdes.2017.02.028 ↗
27. Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells10.1038/nnano.2009.226 ↗
28. Electrochemical and photoelectrochemical activity of laser modified semitransparent nanotubes formed out of AuTi layers and Titania nanotubes decorated with gold nanoparticles10.1016/j.electacta.2025.145724 ↗
29. Synthesis and investigation of multifunctional TiO2 photocatalysts modified by metal nanoparticles10.1016/j.catcom.2024.106907 ↗
30. Preferentially oriented Ag-TiO2 nanotube array film: an efficient visible-light-driven photocatalyst10.1016/j.jhazmat.2020.123016 ↗
31. Silver nanoparticle modified TiO2 nanotubes with enhanced the efficiency of dye-sensitized solar cells10.1016/j.micromeso.2019.06.011 ↗
32. Anodic Titania nanotubes decorated with gold nanoparticles produced by laser-induced dewetting of thin metallic films10.1038/s41598-020-77710-x ↗
33. Electrochemical fabrication and properties of highly ordered Fe‐doped TiO2 nanotubes10.1002/cphc.201200406 ↗
34. Honey-comb structured WO3 /TiO2 thin films with improved electrochromic properties10.1149/2.0031510jes ↗
35. Compositionally dependent nonlinear optical bandgap behavior of mixed anodic oxides in niobium–titanium system10.1021/acscombsci.6b00162 ↗
36. Vertically oriented Ti−Fe−O Nanotube array films: toward a useful material architecture for solar spectrum water photoelectrolysis10.1021/nl0710046 ↗
37. Surface Plasmon resonance enhanced light absorption and wavelength tuneable in gold-coated iron oxide spherical nanoparticle10.1016/j.jmmm.2018.02.066 ↗
38. Probing plasmonic Ag nanoparticles on TiO2 nanotube arrays electrode for efficient solar water splitting10.1016/j.ijhydene.2018.09.094 ↗
39. Localized surface plasmon resonance for improving optical absorption in core-shell Ag@TiO2 nanoparticles10.2306/scienceasia1513-1874.2021.049 ↗
40. Ultrasensitive Ag-coated TiO2 nanotube arrays for flexible SERS-based optofluidic devices10.1039/C5TC01154J ↗
41. Antibacterial activity and cytocompatibility of Cu–Ti–O nanotubes10.1002/jbm.a.34847 ↗
42. Reduced ensemble plasmon line widths and enhanced two-photon luminescence in anodically formed high surface area Au–TiO2 3D nanocomposites10.1021/acsami.6b13164 ↗
43. Variable Mott-Schottky plots acquisition by potentiodynamic electrochemical impedance spectroscopy10.1007/s10008-005-0025-7 ↗
44. Influence of anodizing parameters on the morphological characteristics of TNTAs10.15282/construction.v3i2.9773 ↗
45. Removal of surface contamination by atomic hydrogen annealing10.2494/photopolymer.33.419 ↗
46. GaAs(100) substrate cleaning by thermal annealing in hydrogen10.1116/1.575893 ↗
47. Principal component analysis of Raman spectra for TiO2 nanoparticle characterization10.1016/j.apsusc.2017.01.193 ↗
48. Mesoporous Au/TiO2 nanocomposites with enhanced photocatalytic activity10.1021/ja069113u ↗
49. Coupled optical absorption, charge carrier separation, and surface electrochemistry in surface disordered/hydrogenated TiO2 for enhanced PEC water splitting reaction10.1039/C5CP04212G ↗
50. Chemistry and properties of nanocrystals of different shapes10.1021/cr030063a ↗
51. Size and temperature dependence of the Plasmon absorption of colloidal gold nanoparticles10.1021/jp984796o ↗
52. Thin layer of ordered boron-doped TiO2 Nanotubes fabricated in a novel type of electrolyte and characterized by Remarkably improved photoactivity10.1016/j.apsusc.2015.09.130 ↗
53. Non-noble metal copper nanoparticles-decorated TiO2 nanotube arrays with plasmon-enhanced photocatalytic hydrogen evolution under visible light10.1016/j.ijhydene.2014.10.122 ↗
54. Oxide thin films based on ordered arrays of 1D nanostructure. a possible approach toward bridging material gap in catalysis10.1039/b703326p ↗
55. Influence of phase composition on optical properties of TiO2: dependence of refractive index and band gap on formation of TiO2-II phase in thin films10.1016/j.optmat.2019.109335 ↗
56. Optical Analysis of Titania: Band Gaps of Brookite
57. Quantum confinement and electronic properties of rutile TiO2 nanowires10.1021/jp807439q ↗
58. Raman investigation of nanosized TiO2: effect of crystallite size and quantum confinement10.1021/jp2122196 ↗
59. Defective TiO2 with intrinsic point defects for photocatalytic hydrogen production: a review
60. Laser-induced surface modification at anatase TiO2 nanotube array photoanodes for photoelectrochemical water oxidation10.1021/acs.jpcc.7b05368 ↗
61. Fabrication and photoelectrochemical properties of ZnS/Au/TiO2 nanotube array films10.1039/c3cp43572e ↗
62. Band gap engineering of Au doping and Au – N codoping into anatase TiO2 for enhancing the visible light photocatalytic performance10.1016/j.ijhydene.2023.10.244 ↗
63. Cyclic voltammetry responses of metastable gold electrodes in aqueous media10.1007/s10008-003-0359-y ↗
64. Electrochemical restructuring of gold electrodes with redox active species to create electrocatalytically active nanostructured surfaces10.1016/j.colsurfa.2020.124580 ↗
65. The electrochemical oxidation and reduction of gold10.1149/1.2408105 ↗
66. Non-enzymatic flexible glucose sensing platform based on nanostructured TiO2 – Au composite10.1016/j.jelechem.2019.02.040 ↗
67. Oxygen reduction on Au(100)-like polycrystalline gold electrode in alkaline solution10.20964/2016.12.51 ↗
68. Electrochemical and photo-electrochemical processes of methylene blue oxidation by Ti/TiO2 electrodes modified with Fe-allophane10.4067/S0717-97072017000200021 ↗
69. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
70. In situ surface hydrogenation synthesis of Ti3+ self-doped TiO2 with enhanced visible light photoactivity10.1039/C4NR00972J ↗
71. Surface localization of defects in black TiO2: enhancing photoactivity or reactivity10.1021/acs.jpclett.6b02289 ↗
72. Review—advent of TiO2 nanotubes as supercapacitor electrode10.1149/2.0561809jes ↗
73. Enhanced photoelectrocatalytic performance of SnO2/TiO2 rutile composite films10.1039/c3ta12218b ↗
74. Enhancing photoelectrochemical properties of Titania nanotubes via rapid thermal annealing in hydrogen atmosphere10.1016/j.mseb.2023.116324 ↗
75. Facet-dependence of electron storage in gold-decorated Titania nanocrystals10.1021/acs.chemmater.3c01252 ↗
76. Determination of Schottky Barrier height and enhanced photoelectron generation in novel plasmonic immobilized multisegmented (Au/TiO2) nanorod arrays (NRAs) suitable for solar energy conversion applications10.1039/C7TC02633A ↗
77. Electrochemical glucose sensor based on the glucose oxidase entrapped in chitosan immobilized onto laser-processed Au-Ti electrode10.1016/j.snb.2020.129409 ↗
78. Photoelectrochemical properties of “increasingly dark” TiO2 nanotube arrays10.1016/j.jelechem.2020.114098 ↗
79. Long‐term stability of light‐induced Ti3+ defects in TiO2 nanotubes for amplified photoelectrochemical water splitting10.1002/cssc.202301614 ↗
80. Switchable intrinsic defect chemistry of titania for catalytic applications10.3390/catal8120601 ↗
81. Open-circuit photopotential characterization of photoelectrochemical activities of Au-modified TiO2 nanorods
82. Materials characterization of TiO2 nanotubes decorated by Au nanoparticles for photoelectrochemical applications10.1039/D1RA07443A ↗
83. Anodized TiO2 nanotubes: effect of anodizing time on film length, morphology and photoelectrochemical properties10.1016/j.matlet.2014.11.145 ↗
84. TiO2 Nanotubes with ultrathin walls for enhanced water splitting10.1039/C5CC04539H ↗
85. Large scale compatible fabrication of gold capped titanium dioxide nanoantennas using a shadowing effect for photoelectrochemical water splitting10.1016/j.ijhydene.2019.11.060 ↗
86. Electrochemically hydrogenated TiO2 nanotubes with improved photoelectrochemical water splitting performance10.1186/1556-276X-8-391 ↗