The growth of oxygen vacancy controlled HfxTi1-xO2 layers deposited by gas injection magnetron sputtering technique
Source abstract
Abstract
Hf x Ti 1-x O 2 layers (0.3 ≤ x ≤ 0.86) were grown by the Gas Injection Magnetron Sputtering (GIMS) technique. Binary Hf-Ti targets with the Hf/Ti atomic ratios of 1/4, 2/3, 3/2, and 4/1, fabricated using plasma surface sintering, were used for reactive sputtering in the fixed Ar/O 2 gas mixture. The initial growth of the GIMS-deposited Hf x Ti 1-x O 2 layers was characterized by an amorphous structure, which crystallized along the oxide layer growth direction when the Hf content was sufficient (x > 0.74). The lattice structure of oxide layers with x ≤ 0.86 exhibited monoclinic crystallization, which is characteristic of HfO 2 . However, when x = 0.74, a highly non-equilibrium mixture of monoclinic and rhombohedral HfO 2 phases was formed. The XPS study showed that these layers’ Hf-O x and Ti-O x bonds were locally O-deficient, indicating that oxygen vacancies control the formation of Hf x Ti 1-x O 2 . The optical properties of the fabricated layers also changed markedly when the chemical composition was modified. For example, an increase in the Hf fraction reduced the extinction coefficient from 1 to 0.2 at 250 nm and the refractive index from 2.45 to 2.3 in the visible range. We indicated that oxygen vacancies create the mid-band states, shifting the absorption towards lower energies. As the x value was increased from 0.30 to 0.86, the corresponding absorption shifted from 3.20 to 2.55 eV. In addition, Hf-rich layers revealed a significant increase in hardness and reduced Young’s modulus by 73 % and 30 %, respectively. All layers were also hydrophobic.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Electronic and Structural Properties of Oxides · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. The electronic structure and optical response of rutile, anatase and brookite TiO210.1088/0953-8984/24/19/195503 ↗
2. Crystal structure and band gap determination of HfO2 thin films10.1063/1.2697551 ↗
3. High Dielectric Constant of RF-Sputtered HfO2 Thin Films10.1143/JJAP.31.2501 ↗
4. Titanium dioxide thin films for next-generation memory devices10.1557/jmr.2012.231 ↗
5. TiO2-based structures for nanoscale memory applications10.1016/j.mssp.2012.11.013 ↗
6. Ti/HfO2-based RRAM with superior thermal stability based on self-limited TiOx10.3390/electronics12112426 ↗
7. Exploring the physical properties related to resistive switching events in HfO2-based RRAM devices with an analytical framework10.1021/acsaelm.2c01350 ↗
8. Resistive switching mechanism of TiO 2 thin films grown by atomic-layer deposition10.1063/1.2001146 ↗
9. Reproducible switching effect in thin oxide films for memory applications10.1063/1.126902 ↗
10. Nonvolatile memory with multilevel switching: a basic model
11. Memristive switching mechanism for metal/oxide/metal nanodevices10.1038/nnano.2008.160 ↗
12. Atomic structure of conducting nanofilaments in TiO2 resistive switching memory10.1038/nnano.2009.456 ↗
13. Role of oxygen vacancies in TiO2-based resistive switches10.1063/1.4779767 ↗
14. Oxygen vacancy filament formation in TiO 2: a kinetic Monte Carlo study10.1063/1.4757584 ↗
15. Simplifying high-density memory: exploiting self-rectifying resistive memory with TiO2/HfO2 bilayer devices10.24425/amm.2024.149767 ↗
16. The mechanism for the suppression of leakage current in high dielectric TiO2 thin films by adopting ultra-thin HfO2 films for memory application10.1063/1.3605527 ↗
17. Atomic layer deposited HfO2 and HfO2/TiO2 bi-layer films using a heteroleptic Hf-precursor for logic and memory applications10.1039/c1jm11763g ↗
18. Role of oxygen vacancies at the TiO2/HfO2 interface in flexible oxide-based resistive switching memory10.1002/aelm.201800833 ↗
19. Interfacial versus filamentary resistive switching in TiO2 and HfO2 devices10.1116/1.4940129 ↗
20. Optimization of gas injection conditions during deposition of AlN layers by novel reactive GIMS method10.2478/s13536-013-0169-6 ↗
21. Surface sintering of tungsten powder targets designed by electromagnetic discharge: a novel approach for film synthesis in magnetron sputtering10.1016/j.matdes.2020.108634 ↗
22. Design of pulsed neon injection in the synthesis of W-B-C films using magnetron sputtering from a surface-sintered single powder cathode10.1016/j.tsf.2020.138426 ↗
23. Application of the plasma surface sintering conditions in the synthesis of ReBx–Ti targets employed for hard films deposition in magnetron sputtering technique10.1016/j.ijrmhm.2021.105756 ↗
24. Magnetron sputtering process control by medium-frequency power supply parameter10.1016/j.tsf.2007.05.077 ↗
25. Woollam, J. A. (2010). Guide to Using WVASE32®. Wextech Systems Inc.
26. Fujiwara · 2009
27. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
28. Influence of experimental variables on the measure of contact angle in metals using the sessile drop method10.1016/j.mspro.2015.04.131 ↗
29. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
30. The effect of yttrium addition on microstructure and mechanical properties of refractory TiTaZrHfW high-entropy films10.3390/coatings13081380 ↗
31. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
32. Titanium and reduced titania overlayers on titanium dioxide(110)10.1016/0368-2048(94)02258-5 ↗
33. Alteration of Ti 2p XPS spectrum for titanium oxide by low-energy Ar ion bombardment10.1002/sia.1296 ↗
34. Investigation of HfO2 thin films on Si by X-ray photoelectron spectroscopy, rutherford backscattering, grazing incidence X-ray diffraction and variable angle spectroscopic ellipsometry10.3390/cryst8060248 ↗
35. Bipolar resistive switching characteristics of HfO2/TiO2/HfO2 trilayer-structure RRAM devices on Pt and TiN-coated substrates fabricated by atomic layer deposition10.1186/s11671-017-2164-z ↗
36. SHI induced effects on the electrical and optical properties of HfO2 thin films deposited by RF sputtering10.1016/j.nimb.2016.01.042 ↗
37. Resistive switching behavior of HfO2 film with different Ti doping concentrations10.1088/0022-3727/49/4/045103 ↗
38. Crystal and electronic structure of oxygen vacancy stabilized rhombohedral hafnium oxide10.1021/acsaelm.2c01255 ↗
39. A structure zone diagram including plasma-based deposition and ion etching10.1016/j.tsf.2009.10.145 ↗
40. The state of coating–substrate interfacial region formed during TiO2 coating deposition by Gas Injection Magnetron Sputtering technique10.1016/j.surfcoat.2020.126092 ↗
41. TiO2 coating fabrication using gas injection magnetron sputtering technique by independently controlling the gas and power pulses10.1016/j.tsf.2021.138695 ↗
42. Thermal conductivity and thermal boundary resistance of atomic layer deposited high-k dielectric aluminum oxide, hafnium oxide, and titanium oxide thin films on silicon10.1063/1.5021044 ↗
43. Monoclinic crystal structures of ZrO2 and HfO2 refined from X-ray powder diffraction data10.1111/j.1151-2916.1985.tb11534.x ↗
44. Investigation of various properties of HfO2-TiO2 thin film composites deposited by multi-magnetron sputtering system10.1016/j.apsusc.2016.12.129 ↗
45. Phase relations and thermal expansion in the system HfO2 ‐TiO210.1111/j.1151-2916.1976.tb09416.x ↗
46. The system HfO2 ‐TiO210.1111/j.1151-2916.1987.tb05655.x ↗
47. Influence of material composition on structural and optical properties of HfO2-TiO2 mixed oxide coatings10.3390/coatings6010013 ↗
48. Optical properties of hafnium oxide thin films and their application in energy-efficient windows10.1016/j.optmat.2004.04.014 ↗
49. Investigation of the origin of the empirical relationship between refractive index and density on the basis of first principles calculations for the refractive indices of various TiO2 phases10.1021/ic035383r ↗
50. Optical properties of HfO2 thin films deposited by magnetron sputtering: from the visible to the far-infrared10.1016/j.tsf.2012.07.037 ↗
51. Structural, optical, and electrical properties of TiO2 thin films deposited by ALD: impact of the substrate, the deposited thickness and the deposition temperature10.1016/j.apsusc.2022.155214 ↗
52. Electronic structure and crystallinity of the HfO2–TiO2 thin films10.1016/j.tsf.2010.03.098 ↗
53. Defect-stabilized substoichiometric polymorphs of hafnium oxide with semiconducting properties10.1021/acsami.1c09451 ↗
54. Reznik, A., Konstantinov, V., Ganykina, E., & Rezvanov, A. (n.d.). First-Principles Calculation of Basic Properties of Rhombohedral Hafnium Oxide with Space Group R3. Physica Status Solidi (B), n/a(n/a), 2400105. https://doi.org/10.1002/pssb.202400105.10.1002/pssb.202400105 ↗
55. Hardness, elastic modulus, and wear resistance of hafnium oxide-based films grown by atomic layer deposition10.1116/1.4961113 ↗
56. Nanomechanical study of amorphous and polycrystalline ALD HfO2 thin films10.1504/IJSURFSE.2011.041402 ↗
57. High-rate reactive high-power impulse magnetron sputtering of hard and optically transparent HfO2 films10.1016/j.surfcoat.2015.08.024 ↗
58. Microstructure of hard and optically transparent HfO2 films prepared by high-power impulse magnetron sputtering with a pulsed oxygen flow control10.1016/j.tsf.2016.10.059 ↗
59. Nanoindentation of TiO2 thin films with different microstructures10.1088/0022-3727/42/14/145305 ↗
60. Mechanical and optical properties of as-grown and thermally annealed titanium dioxide from titanium tetrachloride and water by atomic layer deposition10.1016/j.tsf.2021.138758 ↗
61. Quantitative evaluation of the photoinduced hydrophilic conversion properties of TiO2 thin film surfaces by the reciprocal of contact angle10.1021/jp022105p ↗
62. Contact angle relaxation and long-lasting hydrophilicity of sputtered anatase TiO2 thin films by novel quantitative XPS analysis10.1021/acs.langmuir.8b03258 ↗
63. Principles of TiO2 Photocatalysis
64. A study on structural, optical and hydrophobic properties of oblique angle sputter deposited HfO2 films10.1016/j.apsusc.2013.06.112 ↗
65. Thickness dependent wetting properties and surface free energy of HfO2 thin films10.1063/1.4953262 ↗
66. Microstructure, wettability, optical and electrical properties of HfO2 thin films: effect of oxygen partial pressure10.1016/j.jallcom.2015.12.080 ↗
67. Influence of sputtering pressure on the structural, optical and hydrophobic properties of sputtered deposited HfO2 coatings10.1016/j.tsf.2013.07.016 ↗