journal article·2020-10Open access

Nanoscale topography, surface charge variation and defect correlation in 2–8 nm thick functional alumina films

Luke Guinane, Devendraprakash Gautam, Jan Kubik, Bernard Stenson, Shane Geary, Vasily Lebedev, Fathima Laffir, Sergey Beloshapkin, Ehtsham Ul-Haq, Syed A.M. Tofail

Abstract

In the nanometric regime, alumina films are often deposited by ALD methods yet in industrial applications, sputtered films thinner than 40 nm are used and research into those is sparse. Here, we investigated the nanoscale topography and the electrical properties of films less than 10 nm thick deposited by direct RF magnetron sputtering. Alumina films deposited on Si appeared to be uniform and topographically defect free as evaluated by TEM and AFM. However, their composition varied as a function of thickness as measured by XPS. The films were non-stoichiometric as Al content increased with film thickness. While SSRM measured current profiles did not highlight leakage sites or voids in the films, KPFM measured local charge fluctuations across the films deposited on Si and Au surfaces. The density of fluctuation sites decreased with an increase of alumina thickness. An electrodeposition method identified insulation weak spots in the alumina where Cu growths formed on the alumina surface. The growth mechanisms were investigated by TEM and EDX. The density of growths decreased with increased alumina thickness. Defects in the deposited alumina film are expected to be due to its non-stoichiometric nature causing charge variations, which weaken the films electrical insulating capability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Anodic Oxide Films and Nanostructures · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Effect of substrate temperature on microstructure and optical properties of nanocrystalline alumina thin films10.1016/j.ceramint.2013.04.104 ↗
2. Pulsed rf magnetron sputtered alumina thin films10.1016/j.ceramint.2014.02.032 ↗
3. Layered Al2O3-SiO2 and Al2O3-Ta2O5 thin-film composites for high dielectric strength, deposited by pulsed direct current and radio frequency magnetron sputtering10.1016/j.apsusc.2019.06.202 ↗
4. Charge trapping analysis of metal/Al 2 O 3/SiO 2/Si, gate stack for emerging embedded memories10.1109/TDMR.2017.2659760 ↗
5. Optical and microstructural characterisations of pulsed rf magnetron sputtered alumina thin film10.1016/j.jmst.2013.05.002 ↗
6. RF magnetron sputtering aluminum oxide film for surface passivation on crystalline silicon wafers10.1155/2013/792357 ↗
7. Evaluating the impact of thermal annealing on c-Si/Al2O3 interface: Correlating electronic properties to infrared absorption10.1063/1.5036738 ↗
8. Comparison in formation, optical properties and applicability of DC magnetron and RF sputtered aluminum oxide films10.1016/j.vacuum.2016.03.033 ↗
9. Pulsed laser deposited alumina thin films10.1016/j.ceramint.2015.09.048 ↗
10. P. S, M. R. G, J. S, K. M.D, and G. V, “Dielectric properties of DC reactive magnetron sputtered Al2O3 thin films,” Thin Solid Films, vol. 520, no. 7, pp. 2689-2694, 2012/01/31/ 2012, doi: https://doi.org/10.1016/j.tsf.2011.11.040.10.1016/j.tsf.2011.11.040 ↗
11. Influence of oxygen on the sputtering of aluminum oxide for the surface passivation of crystalline silicon10.1016/j.solmat.2010.03.034 ↗
12. Composition, structure and electrical properties of DC reactive magnetron sputtered Al2O3 thin films10.1016/j.mssp.2012.12.012 ↗
13. Investigation of the defect density in ultra-thin Al2O3 films grown using atomic layer deposition10.1016/j.surfcoat.2010.12.001 ↗
14. Probing the dielectric properties of ultrathin Al/Al2O3/Al trilayers fabricated using in situ sputtering and atomic layer deposition10.1021/acsami.7b16506 ↗
15. Growth of ultrathin Al2O3 films on n-InP substrates as insulating layers by RF magnetron sputtering and study on the optical and dielectric properties10.3390/coatings9050341 ↗
16. Stable reactive deposition of amorphous Al2O3 films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle10.1016/j.vacuum.2015.11.017 ↗
17. High rate reactive sputtering of Al2O3 coatings by HiPIMS10.1016/j.surfcoat.2018.10.024 ↗
18. Stress induced degradation and reliability of Al2O3 thin film on silicon10.1016/j.vacuum.2018.03.009 ↗
19. Electroplating to visualize defects in Al2O3 thin films grown using atomic layer deposition10.1016/j.tsf.2008.12.052 ↗
20. Quantitative analysis of nano-defects in thin film encapsulation layer by Cu electrodeposition10.1016/j.apsusc.2018.05.072 ↗
21. Local phenomena at grain boundaries: An alternative approach to grasp the role of oxygen vacancies in metallization of VO210.1016/j.jmat.2018.09.003 ↗