Structural evolution, ferroelectric phase transitions, and dielectric behavior of Sn-doped Ba _0.95 Sr _0.05 TiO ₃ ferroelectric ceramics

In this report, I studied the structural, morphological, and dielectric properties of new ferroelectric compounds prepared according to the formula Ba0.95Sr0.05Ti1-ySnyO3. The solid-state reaction method enhanced by a high-efficiency metal ball mill was used in the preparation process. The quantitative and qualitative analysis of the XRD patterns confirmed the crystallization of the samples y = 0.00, 0.05 in the tetragonal crystal system and the presence of the tetragonal and cubic crystal systems together in the samples y = 0.10, 0.14. Formation of BaSnO3 impurities in very low percentages in the doped samples. Their prevalence increases with increasing tin content, reaching 8.7% at the ratio y = 0.14. SEM images of the ceramic samples showed the formation of nano-ceramics with a high degree of condensation at the doping ratio y = 0.05. The dielectric analyses showed high thermal stability in the dielectric properties of the ceramic samples y = 0.05, 0.10, which was shown by the flatness of the dielectric constant curve over the entire temperature range studied, where this stability is attributed to the structure of the nano-grains that resist the ferroelectric-paraelectric phase transition. Furthermore, the dielectric properties were interpreted by accurately linking the dielectric measurements with the nano-structural and polar properties.