Growth of Ag(1 1 1) on Si(1 1 1) with nearly flat band and abrupt interface

Abstract Growth of Ag films of up to 30 nm thickness on Si(1 1 1) 7 × 7 at room temperature is investigated by low energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). LEED revealed the coexistence of Ag and Si spots starting with 1 monolayer (ML) of Ag deposited. The Ag lattice constant, starting with 25 ML, is slightly higher than for bulk Ag and increase linearly with Ag thickness, reaching about 4.2 nm for the thickest films. The average terrace widths detected from LEED spot profile analysis are about 30 nm for clean Si(1 1 1) 7 × 7 and about 5.5 nm for the thickest Ag(1 1 1) film, in agreement with STM observations. The intensity variation of core levels analyzed by XPS is taken into account by a model assuming the initial formation of Ag islands with linear variation of coverage vs. the amount of Ag deposited, followed by growth in a quasi layer-by-layer mode. The interface barrier is in the range of 0.4 eV, lower than all values reported previously. Ag deposited on Si(1 1 1) 7 × 7 at room temperature provides flat Ag(1 1 1) for synthesis of 2D materials, and may be used for low barrier Schottky diodes.