journal article·2014-07

Effects of RExOy addition on corrosion behavior of the Al–Cu alloys in 3.5wt.% NaCl solution and pH=4 acid solution

Zhihao Bai, Yumei Xia, Feng Qiu, Yingying Liu, Wei Hu, Qichuan Jiang

Publisher page

Abstract

Abstract Immersion tests and electrochemical experiments were performed to study the room temperature corrosion behavior of the unmodified and modified Al–Cu alloys with using RE x O y (Pr x O y and La x O y ) in 3.5 wt.% NaCl solution and pH = 4 acid solution. The results showed that the modified Al–Cu alloys have superior corrosion resistance than the unmodified alloy in both solutions. However, a contrary variation trend of corrosion resistance with increasing RE x O y content was found in these two solutions. In 3.5 wt.% NaCl solution, the corrosion resistance of the modified alloys increases gradually with increasing RE x O y content, but deceases gradually in pH = 4 acid solution. The reason for this contrary trend was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al–Si slurries10.1016/j.actamat.2006.03.016 ↗
2. Phase relations and precipitation in Al–Mg–Si alloys with Cu additions10.1016/S0079-6425(03)00031-8 ↗
3. Influence of solutes and second phase particles on work hardening behavior of Al6063 alloy processed by cryorolling10.1016/j.msea.2011.01.010 ↗
4. Corrosion and passivation behavior of Mg–Zn–Y–Al alloys prepared by cooling rate-controlled solidification10.1016/j.apsusc.2011.01.046 ↗
5. Influence of high-temperature preprecipitation on local corrosion behaviors of Al–Zn–Mg alloy10.1016/j.scriptamat.2006.09.028 ↗
6. Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al–Cu in neutral aqueous solutions10.1016/S0010-938X(98)00145-0 ↗
7. Evolution of high temperature corrosion behavior of La2(Zr0.7Ce0.3)2O7 with the addition of Y2O3 thermal barrier coatings in contacts with vanadate–sulfate salts10.1016/j.jallcom.2012.04.074 ↗
8. Investigation of cerium as a cathodic inhibitor for aluminum–copper alloys10.1149/1.2049985 ↗
9. The corrosion behaviour of aluminium–silicon carbide composites in aerated 3.5% sodium chloride10.1016/0010-938X(94)90174-0 ↗
10. Use of rare earth salts as electrochemical corrosion inhibitors for an Al–Li–Cu (8090) alloy in 3.56% NaCl10.1016/j.electacta.2004.06.008 ↗
11. Cerium conversion coatings for the corrosion protection of aluminum
12. Corrosion inhibition of aluminum alloy AA 2014 by rare earth chlorides10.1016/j.corsci.2006.06.026 ↗
13. The electrochemical research of hot-dip aluminizing film corrosion resistance in seawater
14. lanthanide compounds as environmentally friendly corrosion inhibitors of aluminium alloys: a review10.1016/S0010-938X(98)00077-8 ↗
15. The role of the metal/oxide interface in the growth of passive films in aqueous environments10.1016/j.corsci.2004.03.004 ↗
16. Protection against corrosion in marine environments of AA5083 Al–Mg alloy by lanthanide chlorides10.1016/S0925-8388(96)02826-5 ↗
17. Anodic dissolution of Al sacrificial anodes in NaCl solution containing Ce10.1016/j.corsci.2011.01.001 ↗
18. Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys10.1016/j.scriptamat.2007.01.036 ↗
19. Microalloying of Sc, Ni, and Ce in advanced Al–Zn–Mg–Cu alloy10.1007/s11661-999-0154-1 ↗
20. The corrosion behavior of scandium alloyed Al 5052 in neutral sodium chloride solution10.1016/S0010-938X(00)00147-5 ↗
21. Microstructure, mechanical properties and corrosion behaviour of dilute Al–Sc–Zr alloy prepared by powder metallurgy10.1016/j.msea.2007.03.070 ↗
22. Effects of multi-modification of rare earth oxides PrxOy and LaxOy on microstructure and tensile properties of casting Al–Cu alloy10.1016/j.msea.2012.08.059 ↗
23. Enhanced corrosion resistance of duplex coatings10.1016/S0257-8972(96)03099-X ↗
24. Multilayer Ni–P coating for improving the corrosion resistance of AZ91D magnesium alloy10.1002/adem.200500136 ↗
25. Corrosion mechanism of the modified casting Al–Cu alloy by the nano-scale PrxOy10.1016/j.jallcom.2008.12.095 ↗
26. Zhu · 1995