journal article·2025-01Open access

Modifying vacancy defects during systematic disordering of the Cr2AlC nano-lamellar system

João S. Cabaço, Maciej Oskar Liedke, Javier Pablo-Navarro, Fabian Ganss, César Magén, Manuel Ricardo Ibarra, Ulrich Kentsch, Maik Butterling, Andreas Wagner, Jürgen Lindner, Jürgen Faßbender, Christoph Leyens, Richard Boucher, Rantej Bali

Abstract

• Cr₂AlC is disordered by ion irradiation; defects are probed with positron techniques. • Large defects (9–15 vacancies) transform into Al and Al-Cr di-vac. post-irradiation. • Transformation scales with atomic displacements, independent of ion species. • Post-irradiation, defect concentration and size are reduced. The layered structure of MAX phases is associated with a number of functional properties and is the subject of extensive research. While the unit-cell layers of these structures have been well studied, much less is known about the distribution and manipulation of point defects within them. Here, we selected the prototype Cr 2 AlC system and, using variable energy positron beams, observed Doppler broadening and positron annihilation lifetimes to track the evolution of defects caused by the penetration of energetic transition metal ions (Co + and Mn + ) and noble gas ions (Ar + and Ne + ). In all cases an overall reduction of the open-volume defect concentration is observed post-irradiation. Atomic displacements induced by the penetrating ions drastically modify the defect distribution: the concentration of agglomerates of 9–15 vacancies (corresponding to positron lifetimes of 335–450 ps) in the precursor [Cr 2 C/Al]n layers is suppressed, whereas Al mono- and Al-Cr di-vacancy (lifetimes 217–231 ps) concentrations are enhanced. This breakdown of large defects into point defects scales with atomic displacements and is largely independent of the penetrating ion species, providing insights into the manipulation of point defects in nano-layered systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silica-coated multi-walled carbon nanotubes10.1016/j.carbon.2010.09.047 ↗
2. The tribological behavior of detonation sprayed coatings: the importance of coating process parameters10.1016/j.wear.2004.03.022 ↗
3. Engineering with surface coatings: The role of coating microstructure10.1016/0257-8972(89)90065-0 ↗
4. The MN+1 AXN phases: a new class of solids: thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
5. Kohlenstoffhaltige ternäre Verbindungen (H-Phase)10.1007/BF00913068 ↗
6. Die H-Phasen Ti2TlC, Ti2PbC, Nb2InC, Nb2SnC und Ta2GaC10.1007/BF00901306 ↗
7. Radiation effects in Mn+1AXn phases10.1063/5.0019284 ↗
8. High pressure study of Ti4AlN3 to 55 GPa10.1063/1.1875750 ↗
9. High-pressure X-ray diffraction study of Ta4AlC310.1063/1.2202387 ↗
10. The scaling behavior and mechanism of Ti2AlC MAX phase coatings in air and pure water vapor10.1016/j.surfcoat.2015.03.037 ↗
11. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage10.1016/j.jeurceramsoc.2014.08.046 ↗
12. Structural transitions induced by ion irradiation in V2AlC and Cr2AlC10.1111/jace.14118 ↗
13. Saturation of ion irradiation effects in MAX phase Cr2AlC10.1016/j.actamat.2016.03.021 ↗
14. Deviation from the pure MAX phase concept: radiation-tolerant nanostructured dual-phase Cr2AlC10.1126/sciadv.abf6771 ↗
15. J. E. Yoo, J. Y. Sung, J. H. Hwang, I. Maeng, S.-J. Oh, I. Lee, Ji. H. Shim, S. Dug. Kim, Du.-S. Yoon, S. Y. Jang, Y. J. Kang, S. W. Lee, MAX-Phase films overcome scaling limitations to the resistivity of metal thin films, ACS Appl Mater Interfaces 13 (2021), 61809-61817. doi: 10.1021/acsami.1c20516.10.1021/acsami.1c20516 ↗
16. Modelling in-plane magneto-transport in Cr2AlC10.1016/j.ceramint.2019.07.339 ↗
17. Electrical transport, thermal transport, and elastic properties of M2AlC (M=Ti, Cr, Nb and V)10.1103/PhysRevB.72.115120 ↗
18. A first-principles study on the defective properties of MAX-phase Cr2AlC: the magnetic ordering and strong correlation effect10.1039/C6RA15366F ↗
19. Fabrication of Cr2AlC powder by molten salt electrolysis at 850 °C with good oxidation resistance10.1016/j.jallcom.2020.154003 ↗
20. Point defects and hydrogen-permeation behavior of MAX phase Cr2AlC coating by first-principles studies
21. Positron annihilation spectroscopy of defects in semiconductors10.1016/S0080-8784(08)63057-4 ↗
22. Defect spectroscopy with positrons: a general calculational method10.1088/0305-4608/13/2/009 ↗
23. S. J. Zinkle, J. Steven, Radiation-Induced Effects on Microstructure, R.J. M. Konings (2012) 65-98.10.1016/B978-0-08-056033-5.00003-3 ↗
24. Elastic properties of nanolaminar Cr2AlC films and beams determined by in-situ scanning electron microscope bending tests10.1016/j.tsf.2016.03.026 ↗
25. Nanostructured plasma etched, magnetron sputtered nanolaminar Cr2AlC MAX phase thin films10.1016/j.apsusc.2013.12.099 ↗
26. SRIM – The stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
27. The role of open-volume defects in the annihilation of antisites in a B2-ordered alloy10.1016/j.actamat.2019.06.037 ↗
28. Positron annihilation spectroscopy10.1146/annurev.ms.10.080180.002141 ↗
29. Positron annihilation spectroscopy in materials structure studies
30. PALSfit: A new program for the evaluation of positron life-time spectra10.1002/pssc.200675868 ↗
31. Open volume defects and magnetic phase transition in Fe60Al40 transition metal aluminide10.1063/1.4919014 ↗
32. A. Wagner, M. Butterling, M.O. Liedke, K. Potzger, R. Krause-Rehberg, Positron annihilation lifetime and Doppler broadening spectroscopy at the ELBE facility, in: International Workshop on Physics with Positrons at Jefferson Lab, 2018. doi: 10.1063/1.5040215.10.1063/1.5040215 ↗
33. Pressureless manufacturing of Cr2AlC compound and the temperature effect10.1080/10426914.2020.1819547 ↗
34. Effect of sintering method on the microstructure of pure Cr2AlC MAX phase ceramics10.2109/jcersj2.15263 ↗
35. Complex optimization of arc melting synthesis for bulk Cr2AlC MAX-phase10.1016/j.ceramint.2020.11.119 ↗
36. Tailoring of the thermal expansion of Cr2(Alx, Ge1−x)C phases10.1016/j.jeurceramsoc.2012.10.008 ↗
37. First-principles calculation of positron annihilation characteristics at metal vacancies10.1103/PhysRevB.54.15016 ↗
38. M. Bugnet, V. Mauchamp. E. Oliviero, M. Jaouen, T. Cabioc’h, Chemically sensitive amorphization process in the nanolaminated Cr2AlC (A=Al or Ge) system from TEM in situ irradiation, J. Nucl. Mater. 441 (2013), 133-137. doi: 10.1016/j.jnucmat.2013.05.028.10.1016/j.jnucmat.2013.05.028 ↗
39. Krause-Rehberg · 1999
40. Positron annihilation at the Si/SiO2 interface10.1063/1.350694 ↗
41. R. A. Hakvoort, H. Schut, A. van Veen, W. M. Arnold Bik, F. H. P. M. Habraken, Positron annihilation study of low pressure chemical vapor deposited silicon nitride films, Appl. Phys. Lett. 59 (1991), 1687-1689. doi: 10.1063/1.106218.10.1063/1.106218 ↗
42. J. S. Cabaco, et al, 2024 (in preparation).
43. Lee, W.E., Giorgi, E., Harrison, R., Maître, A. and Rapaud, O. (2014). Nuclear Applications for Ultra-High Temperature Ceramics and MAX Phases. In Ultra-High Temperature Ceramics (eds W.G. Fahrenholtz, E.J. Wuchina, W.E. Lee and Y. Zhou). doi: 10.1002/9781118700853.ch15.10.1002/9781118700853.ch15 ↗
44. D. J. Tallman (2015), On the potential of MAX phases for nuclear applications, Drexel University.
45. MAX phase carbides and nitrides: Properties for future nuclear power plant in-core applications and neutron transmutation analysis10.1016/j.nucengdes.2011.12.009 ↗
46. Advanced irradiation-resistant materials for generation IV nuclear reactors10.1016/B978-0-08-100906-2.00016-1 ↗
47. Radiation response of Ti2AlC MAX phase coated Zircaloy-4 for accident tolerant fuel cladding10.1016/j.jnucmat.2019.05.021 ↗
48. Munagala, S.P. (2017). MAX Phases: New Class of Carbides and Nitrides for Aerospace Structural Applications . In: Prasad, N., Wanhill, R. (eds) Aerospace Materials and Material Technologies. Indian Institute of Metals Series. Springer, Singapore. doi: 10.1007/978-981-10-2134-3_20.10.1007/978-981-10-2134-3_20 ↗
49. Layered ternary MAX phases and their MX particulate derivative reinforced metal matrix composite: A review10.1016/j.jallcom.2020.157313 ↗
50. M. Roknuzzaman, M. A. Hadi, M. J. Adben, M. T. Nasir, A. K. M. A. Islam, M. S. Ali, K. Ostrikov, S. H. Naqib, Physical properties of predicted Ti2CdN versus existing Ti2CdC MAX phase: An ab initio study 133 (2016), 148–153. doi: 10.1016/j.commatsci.2015.11.039.10.1016/j.commatsci.2015.11.039 ↗