A finite element framework on water vapor transmission rates by pinhole damages in inorganic ultrabarriers for flexible electronics

1. Materials and technologies for soft implantable neuroprostheses10.1038/natrevmats.2016.63 ↗

2. Extended barrier lifetime of partially cracked organic/inorganic multilayers for compliant implantable electronics10.1002/smll.202103039 ↗

3. Recent advances in encapsulation of flexible bioelectronic implants: materials, technologies and characterization methods10.1002/adma.202201129 ↗

4. Skin-like low-noise elastomeric organic photodiodes, Science

5. Wireless closed-loop optogenetics across the entire dorsoventral spinal cord in mice

6. Deployment of an electrocorticography system with a soft robotic actuator, Science10.1126/scirobotics.add1002 ↗

7. The neurons that restore walking after paralysis10.1038/s41586-022-05385-7 ↗

8. M. Niemiec, K. Kim, Lifetime engineering of bioelectronic implants with mechanically reliable thin film encapsulations, Progress in Biomedical Engineering (2023).10.1088/2516-1091/ad0b19 ↗

9. Atomic layer deposition: an overview10.1021/cr900056b ↗

10. Atomic layer deposited Al2O3 capping layer effect on environmentally assisted cracking in SiNx barrier films10.1063/1.5061780 ↗

11. Lifetime assessment of atomic-layer-deposited Al2O3–Parylene C bilayer coating for neural interfaces using accelerated age testing and electrochemical characterization10.1016/j.actbio.2013.10.031 ↗

12. Transferred, ultrathin oxide bilayers as biofluid barriers for flexible electronic implants10.1002/adfm.201702284 ↗

13. Ultrathin trilayer assemblies as long-lived barriers against water and ion penetration in flexible bioelectronic systems10.1021/acsnano.8b05552 ↗

14. A correlation study between barrier film performance and shelf lifetime of encapsulated organic solar cells10.1016/j.solmat.2012.02.002 ↗

15. Materials for flexible bioelectronic systems as chronic neural interfaces10.1038/s41563-020-0679-7 ↗

16. Mechanisms of vapor permeation through multilayer barrier films: Lag time versus equilibrium permeation10.1063/1.1768610 ↗

17. H. Fang, J. Zhao, K.J. Yu, E. Song, A.B. Farimani, C.-H. Chiang, X. Jin, Y. Xue, D. Xu, W. Du, K.J. Seo, Y. Zhong, Z. Yang, S.M. Won, G. Fang, S.W. Choi, S. Chaudhuri, Y. Huang, M.A. Alam, J. Viventi, N.R. Aluru, J.A. Rogers, Ultrathin, transferred layers of thermally grown silicon dioxide as biofluid barriers for biointegrated flexible electronic systems, Proceedings of the National Academy of Sciences 113 (2016) 11682–11687. https://doi.org/10.1073/pnas.1605269113.10.1073/pnas.1605269113 ↗

18. Permeation measurements and modeling of highly defective Al2O3 thin films grown by atomic layer deposition on polymers10.1063/1.3519476 ↗

19. Comparison of copper electroplating, copper wet etching and linear sweep voltammetry as techniques to investigate the porosity of atomic layer deposited Al2O310.1016/j.tsf.2019.137424 ↗

20. Electroplating to visualize defects in Al2O3 thin films grown using atomic layer deposition10.1016/j.tsf.2008.12.052 ↗

21. Investigation of the defect density in ultra-thin Al2O3 films grown using atomic layer deposition10.1016/j.surfcoat.2010.12.001 ↗

22. Probabilistic distributions of pinhole defects in atomic layer deposited films on polymeric substrates10.1116/1.4938496 ↗

23. Experimental investigation of defect-assisted and intrinsic water vapor permeation through ultrabarrier films10.1063/1.4942510 ↗

24. Ultrahigh barrier coating deposition on polycarbonate substrates10.1116/1.1705646 ↗

25. Water vapor permeation in amorphous/polycrystalline inorganic layers on polyethylene terephthalate substrates10.1016/j.tsf.2022.139584 ↗

26. A model for adsorption and diffusion in water vapor barrier films10.1002/pssb.202000609 ↗

27. E.H. Wong, Y.C. Teo, T.B. Lim, Moisture diffusion and vapour pressure modeling of IC packaging, in: 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206), 1998: pp. 1372–1378. https://doi.org/10.1109/ECTC.1998.678922.10.1109/ECTC.1998.678922 ↗

28. Environmentally assisted cracking in silicon nitride barrier films on poly(ethylene terephthalate) substrates10.1021/acsami.6b06417 ↗

29. Influence of polymer substrate damage on the time dependent cracking of SiNx barrier films10.1038/s41598-018-22105-2 ↗

30. Note: A single specimen channel crack growth technique applied to brittle thin films on polymer substrates10.1063/1.4977473 ↗

31. Optimizing crack onset strain for silicon nitride/fluoropolymer nanolaminate barrier films10.1021/acsanm.9b00440 ↗

32. Effects of particle inclusions on cracking in ultrathin barrier films10.1016/j.tsf.2020.138387 ↗

33. Role of filler and its heterostructure on moisture sorption mechanisms in polyimide films10.1038/s41598-018-35181-1 ↗

34. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗