journal article·2013-08

Preparation and characterization of carbon composite plates using Ni-PTFE composite nano-plating

Jae-Ho Kim, Susumu Yonezawa, Masayuki Takashima

Publisher page

Abstract

Abstract Graphite particles (100 and 40 μm) were coated with Ni (18–38 wt.%) and PTFE fine particles (0.3 μm; 8 wt.%) via electroless Ni-PTFE composite nano-plating. The conductivity of C/Ni-PTFE with 100 μm and 40 μm graphite particles increased concomitantly with the Ni content and reached about 300 S m−1 and 210 S m−1 at 38 wt.% Ni, respectively. The particles were pressed into be plates under a pressure of 10–500 kg cm−2 and the plates were then subjected to heat treatment at 350 °C. The surface of C/Ni-PTFE plates contained infinitely many gaps of 0.01–20 μm; these gaps are useful as a pathway for reacting gases. The current density (43 mA cm−2 at 300 mV) of C/Ni-PTFE electrode with 100 μm graphite particles was about 2.4 times higher than that of C/Ni-PTFE electrode with 40 μm graphite particles, which might be attributed to the improvement of total conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Electrodeposition and Electroless Coatings · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Material and processes for light weight and high power density PEM fuel cells
2. K. Hiroshi, Gas diffusion layer for solid polymer electrolyte fuel cell, US patent 6,127,059.
3. The role of carbon in fuel cells10.1016/j.jpowsour.2006.02.054 ↗
4. Impregnation of metal carbides in Raney Ni-PTFE hydrogen electrodes10.1016/j.ijhydene.2006.10.051 ↗
5. PTFE-bonded Raney nickel hydrogen electrodes in alkaline fuel cells10.1246/bcsj.54.2553 ↗
6. The redox behavior of electroless Ni/PTFE deposits in KOH10.1149/1.2220861 ↗
7. Electroless Ni-plating on PTFE fine particles10.1016/j.jfluchem.2008.02.002 ↗
8. Preparation and characterization of Ni-PTFE plate as an electrode for alkaline fuel cell: effects of conducting materials on the performance of electrode10.1016/j.ijhydene.2010.05.110 ↗
9. The possible use of polymer gel electrolytes in nickel/metal hydride battery10.1016/S0167-2738(02)00092-9 ↗
10. The effect of the amount of electrolyte in the anode gel on the recharge ability of alkaline manganese dioxide-zinc cells10.1016/0378-7753(89)80128-4 ↗
11. Hydroponics gel as a new electrolyte gelling agent for alkaline zinc-air cells10.1016/S0378-7753(01)00823-0 ↗
12. Production, properties and potential of graphene10.1016/j.carbon.2010.01.058 ↗
13. Crystallite orientation in graphite disks made under pressure