Materials characterization of impregnated W and W–Ir cathodes after oxygen poisoning
Source abstract
Abstract
Electric thrusters use hollow cathodes as the electron source for generating the plasma discharge and for beam neutralization. These cathodes contain porous tungsten emitters impregnated with BaO material to achieve a lower surface work function and are operated with xenon propellant. Oxygen contaminants in the xenon plasma can poison the emitter surface, resulting in a higher work function and increased operating temperature. This could lead directly to cathode failure by preventing discharge ignition or could accelerate evaporation of the BaO material. Exposures over hundreds of hours to very high levels of oxygen can result in increased temperatures, oxidation of the tungsten substrate, and the formation of surface layers of barium tungstates. In this work, we present results of a cathode test in which impregnated tungsten and tungsten-iridium emitters were operated with 100 ppm of oxygen in the xenon plasma for several hundred hours. The chemical and morphological changes were studied using scanning electron microscopy, energy dispersive spectroscopy, and laser profilometry. The results provide strong evidence that high concentrations of oxygen accelerate the formation of tungstate layers in both types of emitters, a phenomenon not inherent to normal cathode operation. Deposits of pure tungsten were observed on the W-Ir emitter, indicating that tungsten is preferentially removed from the surface and transported in the insert plasma. A W-Ir cathode surface will therefore evolve to a pure W composition, eliminating the work function benefit of W-Ir. However, the W-Ir emitter exhibited less erosion and redeposition at the upstream end than the pure W emitter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Catalytic Processes in Materials Science · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Experimental study of impregnated-cathode behavior, emission, and life10.1063/1.327959 ↗
2. Modern dispenser cathodes
3. Rapid turn-on of shelf-stored tubes: an update10.1109/16.88506 ↗
4. Microanalysis of extended-test xenon hollow cathodes
5. Destructive evaluation of a xenon hollow cathode after a 28,000h life test
6. A 5000h xenon hollow cathode life test
7. Suitch · 1987
8. The results of an 8200h wear test of the NSTAR ion thruster
9. Destructive physical analysis of hollow cathodes from the deep space 1 flight spare ion engine 30,000hr life test
10. Tungsten and barium transport in the internal plasma of hollow cathodes10.1063/1.3111970 ↗
11. Barium source material development for reservoir hollow cathodes
12. The effect of reactive gases on hollow cathode operation
13. Characterization of hollow cathode performance and thermal behavior
14. Long and short term effects of oxygen exposure on hollow cathode operation
15. Scanning optical pyrometer for measuring temperatures in hollow cathodes10.1063/1.2774828 ↗
16. Scenario for hollow cathode end-of-life
17. Hollow cathode and keeper-region plasma measurements