X-ray photoelectron spectroscopic analysis of oxidized Fe–16Cr–16Ni–2Mn–1Mo–2Si austenitic stainless steel
Source abstract
Abstract
Depth profile analysis (argon ion etching/X-ray photoelectron spectroscopy) was conducted on a series of Fe–16Cr–16Ni–2Mn–1Mo–2Si austenitic stainless steel samples oxidized at 973 and 1073 K with exposure times of 25, 100, 193, 436 and 700 h. Surface and near surface rearrangement following oxidation resulted in a region of high Cr concentration on all oxidized samples. Temperature and time dependence to O2 penetration depth was observed. In general, O2 penetration depth was found to increase with increasing exposure up to 436 h. No increase in depth was observed between 436 and 700 h exposure time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Alman · 2002
2. Influence of Yttrium -Alloying Addition on the Oxidation of Alumina Formers at 1173K10.1023/A:1020511304401 ↗
3. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
4. Lustman · 1948 · 223
5. Fuller · 1948
6. 1948
7. E.A. Schoeffer, Corrosion Resistant Castings, pp. 549–553.
8. O.K. Parmiter, Wrought Stainless Steels, pp. 553–556.
9. W.O. Binder, The Resistance of Wrought Stainless Steels to Corrosion, pp. 557–562.
10. The influence of implanted yttrium on the cyclic oxidation behavior of 304-stainless steel10.1016/j.apsusc.2005.05.054 ↗
11. High temperature corrosion of nanoceria coated 9Cr–1Mo ferritic steel in air and steam10.1016/j.surfcoat.2006.02.007 ↗
12. Characterization of iron based alloy interconnects for reduced temperature solid oxide fuel cells10.1016/S0167-2738(99)00329-X ↗
13. Influence of silicon and aluminum additions on the oxidation resistance of a lean chromium stainless steel10.1023/A:1015344220073 ↗
14. 1948
15. J.M. Hodges, E.C. Bain, Functions of the Alloying Elements in Steel, pp. 453–458.
16. W. Craftsw, Chromium in Steel, pp. 458–462.
17. C.E. Sims, Manganese in Steel, pp. 465–468.
18. A.J. Herzig, Molybdenum in Steel, pp. 468–473.
19. J.W. Sands, Nickel in Steel, pp. 473–476.
20. E.S. Greiner, Silicon in Steel, pp. 476–478.
21. Effect of alloy grain size and silicon content on the oxidation of austenitic Fe–Cr–Ni–Mn–Si alloys in pure O210.1007/BF00662967 ↗
22. C. Johnson, R. Gemmen, J.A. Poston Jr., C. Schaeffer, N. Orlovskaya, L. Fegely, C. Rawn, Perovskite based protective coatings for solid oxide fuel cell metallic interconnects, solid oxide fuel cells IX (SOFC-IX) vol. 2, In: S.C. Singhal, J. Mizusaki, Proceedings of the International Symposium, vol. 2005–2007, The Electrochemical Society Inc., Pennington, NJ, pp. 842–1850.
23. High temperature corrosion behavior of siliconized 310 stainless steel10.1016/S0254-0584(99)00264-3 ↗
24. Effects of silicon on the oxidation resistance of 9% Cr steels10.1016/S0169-4332(02)01505-2 ↗
25. Oxidation behavior at 900°C of austenitic, ferritic and duplex stainless steels manufactured by powder metallurgy10.1023/A:1023000329514 ↗
26. Chromium depletion of vacuum annealed stainless steel surfaces10.1116/1.1317712 ↗
27. The effects of oxygen adsorption on the positive secondary ion yield of stainless steel10.1116/1.1318090 ↗
28. Preferential Sputtering in oxides as metals and revealed by X-ray photoelectron spectroscopy10.1116/1.570090 ↗
29. A review of the stainless steel surface10.1116/1.572301 ↗
30. Sputtering of multicomponent materials10.1116/1.571911 ↗
31. Characterization of high temperature oxide films on stainless steels by electrochemical-impedance spectroscopy10.1023/A:1018856808917 ↗
32. Moulder · 1995
33. NIST Reference Standard 2533. U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD.
34. Analysis of the air-formed oxide film on a series of iron–chromium alloys by ion scattering spectroscopy10.1149/1.2132783 ↗
35. Calibration of argon ion sputter rates using nuclear microanalysis and auger spectroscopy10.1002/sia.740070209 ↗
36. The Effect of the oxidation atmosphere on the initial oxidation of the type 430 stainless Steel at 1273K10.1016/S0010-938X(97)00113-3 ↗
37. XPS, LEED, and STM study of thin oxide films formed on Cr(110)10.1016/S0039-6028(00)00439-8 ↗
38. Zangwill · 1988
39. Redhead · 1993
40. Relation between 2p X-ray photoelectron and K X-ray emission spectra of Manganese and iron oxides10.1016/S0368-2048(98)00293-X ↗
41. XPS and SEM studies of chromium oxide films chemically formed on stainless steel 316L10.1016/S0254-0584(00)00249-2 ↗
42. Formation and electrical properties of oxide and sulphide films of Co, Ni and Mo studied by XPS10.1016/S0368-2048(98)00292-8 ↗
43. Correlation between the surface chemistry of annealed IF steels and the growth of a galvanneal coating10.1016/j.actamat.2005.03.003 ↗
44. The effect of manganese additions on the reactive evaporation of chromium in Ni–Cr alloys10.1016/j.scriptamat.2006.01.026 ↗
45. 1979 · D45
46. M.W. Chase Jr., C.A. Davies, J.R. Downey Jr., D.J. Frurip, R.A. McDonald, A.N. Syverud, JANAF thermochemical tables, 3rd ed., Part II, Cr–Zr, J. Phys. Chem. Reference Data, 14, Suppl. 1, 1985, pp 940, 1189, 1201, 1203, 1516, 1521.
47. Thermodynamic properties for bunsenite, NiO, magnetite, Fe3O4, and hematite, Fe2O3 with comments on selected oxygen buffer reactions
48. Fan, Liang-0Shih Mechanism of CaO reaction with H2S: diffusionthrough CaS product layer10.1016/S0009-2509(98)00339-X ↗