journal article·2013-10

A comparative study of fibrinogen adsorption onto metal oxide thin films

P. Silva-Bermudez, S. Muhl, S.E. Rodil

Publisher page

Abstract

Abstract One of the first events occurring upon foreign material-biological medium contact is the adsorption of proteins, which evolution greatly determines the cells response to the material. Protein–surface interactions are a complex phenomenon driven by the physicochemical properties of the surface, protein(s) and liquid medium involve in the interaction. In this article the adsorption of fibrinogen (Fbg) onto Ta2O5, Nb2O5, TiO2 and ZrO2 thin films is reported. The adsorption kinetics and characteristics of the adsorbed fibrinogen layer were studied in situ using dynamic and spectroscopic ellipsometry. The films wettability, surface energy (γLW/AB) and roughness were characterized aiming to elucidate their correlations with Fbg adsorption. The adsorption rate changed accordingly to the film; the fastest adsorption rate and highest Fbg surface mass concentration (Γ) was observed on ZrO2. The hydrophobic/hydrophilic character of the oxide highly influenced Fbg adsorption. On Ta2O5, Nb2O5 and TiO2, which were either hydrophilic or in the breaking-point between hydrophilicity and hydrophobicity, Γ was correlated to the polar component of γLW/AB and roughness of the surface. On ZrO2, clearly hydrophobic, Γ increased significantly off the correlation observed for the other films. The results indicated different adsorption dynamics and orientations of the Fbg molecules dependent on the surface hydrophobic/hydrophilic character.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Surface Interaction Studies · Blood properties and coagulation · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. On the mechanisms of biocompatibility10.1016/j.biomaterials.2008.04.023 ↗
2. Biological surface science10.1016/S0039-6028(01)01809-X ↗
3. Water and the acute biological response to surfaces10.1163/156856299X00667 ↗
4. Ramsden · 2008
5. Mediation of biomaterial-cell interactions by adsorbed proteins: a review10.1089/ten.2005.11.1 ↗
6. Inorganic PVD and CVD coatings in medicine – a review of protein and cell adhesion on coated surfaces10.1163/016942409X12598231568023 ↗
7. Improving biocompatibitity of implantable metals by nanoscale modification of surfaces: an overview of strategies, fabrication methods, and challenges10.1002/smll.200801186 ↗
8. Understanding biophysicochemical interactions at the nano-bio interface10.1038/nmat2442 ↗
9. Protein-material interactions: from micro-to-nano scale10.1016/j.mseb.2008.06.007 ↗
10. Biocompatibility of beta-stabilizing elements of titanium alloys10.1016/j.biomaterials.2004.01.021 ↗
11. Statistical correlation between cell adhesion and proliferation on biocompatible metallic materials10.1002/jbm.a.30212 ↗
12. Niobium based coatings for dental implants10.1016/j.apsusc.2010.10.021 ↗
13. Porous TiNbZr alloy scaffolds for biomedical applications10.1016/j.actbio.2009.06.002 ↗
14. Surface analysis and biocorrosion properties of nanostructured surface sol-gel coatings on Ti6Al4V titanium alloy implants10.1002/jbm.b.30575 ↗
15. Adsorption of fibrinogen on tantalum oxide, titanium oxide and gold studied by the QCM-D technique10.1016/j.colsurfb.2005.04.007 ↗
16. The influence of surface energy on competitive protein adsorption on oxidized NiTi surfaces10.1016/j.biomaterials.2006.09.040 ↗
17. Enhancement of protein adsorption induced by surface roughness10.1021/la0621923 ↗
18. Influence of PEG architecture on protein adsorption and conformation10.1021/la051726h ↗
19. Poly(l-lysine)-γ-poly(ethylene glycol) layers on metal oxide surfaces: surface-analytical characterization and resistance to serum and fibrinogen adsorption10.1021/la000736+ ↗
20. Quantifying protein adsorption on combinatorially sputtered Al-, Nb-, Ta- and Ti-containing films with electron microprobe and spectroscopic ellipsometry10.1016/j.susc.2009.02.014 ↗
21. A high throughput approach to quantify protein adsorption on combinatorial metal/metal oxide surfaces using electron microprobe and spectroscopic ellipsometry10.1016/j.susc.2008.07.020 ↗
22. Current strategies towards hemocompatible coatings10.1039/b703416b ↗
23. Contact activation of the plasma coagulation cascade. III. Biophysical aspects of thrombin-binding anticoagulants10.1002/(SICI)1097-4636(199804)40:1<92::AID-JBM11>3.0.CO;2-M ↗
24. Osteoblast adhesion on biomaterials10.1016/S0142-9612(99)00242-2 ↗
25. Albumin adsorption on oxide thin films studied by spectroscopic ellipsometry10.1016/j.apsusc.2011.10.020 ↗
26. Application of ellipsometry techniques to biological materials10.1016/j.tsf.2010.11.082 ↗
27. Protein absorption and ellipsometry in biomaterial research10.1016/S0142-9612(97)00112-9 ↗
28. Ellipsometry in life science
29. A snake-based approach to accurate determination of both contact points and contact angles10.1016/j.colsurfa.2006.03.008 ↗
30. Additive and nonadditive surface-tension components and the interpretation of contact angles10.1021/la00082a018 ↗
31. Ellipsometry as a tool to study adsorption behavior of synthetic and biopolymers at air-water-interface10.1002/bip.1978.360170711 ↗
32. Buffer dependence of refractive index increments of protein solutions10.1002/(SICI)1097-0282(199812)46:7<489::AID-BIP6>3.0.CO;2-E ↗
33. A comparative study of protein adsorption on titanium oxide surfaces using in situ ellipsometry, optical waveguide lightmode spectroscopy, and quartz crystal microbalance/dissipation10.1016/S0927-7765(01)00236-3 ↗
34. Formation and cross-linking of fibrinogen layers monitored with in situ spectroscopic ellipsometry10.1016/j.colsurfb.2009.09.013 ↗
35. Optical properties of amorphous and polycrystalline tantalum oxide thin films measured by spectroscopic ellipsometry from 0.03 to 8.5 eV10.1016/S0040-6090(00)01881-2 ↗
36. Electrical and structural properties of zirconia thin films prepared by reactive magnetron sputtering10.1016/j.physb.2007.05.022 ↗
37. Optical constants of DC magnetron sputtered titanium dioxide thin films measured by spectroscopic ellipsometry10.1002/crat.200310094 ↗
38. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
39. Human plasma fibrinogen adsorption on ultraflat titanium oxide surfaces studied with atomic force microscopy10.1021/la000362k ↗
40. A model for fibrinogen – domains and sequence10.1126/science.4071058 ↗
41. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
42. The surface parameters modifications at nano scale for biomedical applications, 16 ISCMP: Progress in Solid State and Molecular Electronics, Ionics and Photonics, J. Phys. Conf. Ser.
43. Fibrinogen adsorption onto 316L stainless steel, Nitinol and titanium10.1016/j.susc.2009.01.040 ↗
44. The density and refractive index of adsorbing protein layers10.1529/biophysj.103.030072 ↗
45. I-125 labelling of human serum albumin and fibrinogen and a study of protein adsorption properties on the surface of titanium oxide film10.1016/S0969-8043(97)00262-5 ↗
46. Fibrinogen adsorption on biomaterials – a numerical study10.1002/mabi.201000120 ↗
47. Mechanisms of fibrinogen adsorption at solid substrates10.1021/la200798d ↗
48. Kinetics of fibrinogen adsorption on hydrophilic substrates10.1021/la101261f ↗
49. Measurement of interaction forces between fibrinogen coated probes and mica surface with the atomic force microscope: the pH and ionic strength effect10.1116/1.2840052 ↗
50. Volumetric interpretation of protein adsorption: Kinetic consequences of a slowly-concentrating interphase10.1016/j.biomaterials.2008.03.043 ↗
51. Volumetric interpretation of protein adsorption: partition coefficients, interphase volumes, and free energies of adsorption to hydrophobic surfaces10.1016/j.biomaterials.2006.07.038 ↗
52. Molecular packing of HSA, IgG, and fibrinogen adsorbed on silicon by AFM imaging10.1016/S0040-6090(98)00363-0 ↗
53. Log-normal distributions across the sciences: keys and clues10.1641/0006-3568(2001)051[0341:LNDATS]2.0.CO;2 ↗
54. Lawless · 2003
55. Ellipsometry on thin organic layers of biological interest: characterization and applications10.1016/S0040-6090(00)01385-7 ↗
56. Protein spreading kinetics at liquid-solid interfaces via an adsorption probe method10.1021/la051059s ↗
57. Effect of surface wettability on protein adsorption and lateral diffusion – analysis of data and a statistical model10.1016/0301-4622(93)E0090-R ↗
58. Simultaneous monitoring of protein adsorption at the solid-liquid interface from sessile solution droplets by ellipsometry and axisymmetric drop shape analysis by profile10.1016/S0927-7765(99)00091-0 ↗
59. SPM analysis of fibrinogen adsorption on solid surfaces10.1016/j.susc.2007.04.155 ↗
60. In-depth characterization and computational 3D reconstruction of flagellar filament protein layer structure based on in situ spectroscopic ellipsometry measurements10.1016/j.apsusc.2011.03.081 ↗
61. TiO2 type influences fibronectin adsorption10.1007/s10856-005-4725-4 ↗
62. Properties of competitively adsorbed BSA and fibrinogen from their mixture on mixed and hybrid surfaces10.1016/j.apsusc.2012.10.150 ↗
63. Differences of platelet adhesion and thrombus activation on amorphous silicon carbide, magnesium alloy, stainless steel, and cobalt chromium stent surfaces10.1002/ccd.21834 ↗