Influence of laser remelting on the microstructure and phases constitution of plasma sprayed hydroxyapatite coatings
Source abstract
Abstract
In this paper, the plasma sprayed coatings were treated by laser remelting. The morphologies, elements analysis and phases of both sprayed and remelted coatings were studied by means of electron probe microanalysis (EPMA), X-ray diffraction (XRD) and so on. The results show that the structure of the sprayed coatings is coarse, the amorphization of HA is tremendous, and the bonding state between the coating and the substrate is mechanical combination. After the sprayed coatings were treated by laser remelting in a proper conditions, the properties of the coatings are improved greatly. The microstructure of remelted coatings is columnar and cellular dendritic crystal which is homogeneous and compact, and the coating consists of HA, α-TCP and CaO phases, the Ca/P ratio of transition layer is close to 1.67, but the Ca/P ratio of surface layer is higher than that of HA because of the loss of P.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. High-pressure plasma spraying of hydroxyapatite powders10.1016/S0921-5093(01)01414-9 ↗
2. Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo10.1016/j.biomaterials.2003.11.053 ↗
3. Further studies on the effect of stand-off distance on characteristics of plasma sprayed hydroxyapatite coating10.1016/S0257-8972(02)00166-4 ↗
4. Effect of spark plasma sintering on the microstructure and in vitro behavior of plasma sprayed HA coatings10.1016/S0142-9612(03)00082-6 ↗
5. Properties of titanium biomaterial fabricated by sinter-bonding of titanium/hydroxyapatite composite surface-coated layer to pure bulk titanium10.1016/S0921-5093(02)00003-5 ↗
6. Transformation of monetite to hydroxyapatite in bioactive coatings on titanium10.1016/S0257-8972(00)01125-7 ↗
7. Influence of thickness on the properties of hydroxyapatite coatings deposited by KrF laser ablation10.1016/S0142-9612(00)00408-7 ↗
8. A study on hybrid bioceramic coatings of HA/poly(vinyl acetate)co-deposited electrochemically on Ti–6Al–4V alloy surface10.1016/S0928-4931(02)00035-8 ↗
9. Dissolution/reprecipitation of calcium phosphate thin films produced by ion beam sputter deposition technique10.1016/S0142-9612(98)00190-2 ↗
10. A novel sol-gel technique for hydroxyapatite preparation10.1016/S0254-0584(02)00392-9 ↗
11. Phase, structural and microstructural investigations of plasma sprayed hydroxyapatite coatings10.1016/S0921-5093(03)00439-8 ↗
12. Hydroxyapatite thin films grown by pulsed laser deposition and radiofrequency magnetron sputtering: comparative study10.1016/j.apsusc.2004.01.029 ↗
13. The process of electrochemical deposited hydroxyapatite coatings on biomedical titanium at room temperature10.1016/S0928-4931(02)00026-7 ↗
14. Ion-beam-assisted deposition (IBAD) of hydroxyapatite coating layer on Ti-based metal substrate10.1016/S0142-9612(99)00186-6 ↗
15. Fluor-hydroxyapatite sol-gel coating on titanium substrate for hard tissue implants10.1016/j.biomaterials.2003.09.104 ↗
16. Immersion behavior of plasma-sprayed modified hydroxyapatite coatings after heat treatment10.1016/S0257-8972(02)00745-4 ↗
17. Microstructural characterizations of plasma sprayed hydroxyapatite coatings10.1016/S0257-8972(02)00855-1 ↗
18. XPS, EDX and FTIR analysis of pulsed laser deposited calcium phosphate bioceramic coatings: the effects of various process parameters10.1016/S0142-9612(99)00128-3 ↗
19. Study of the Ca/P atomic ratio of the amorphous phase in plasma-sprayed hydroxyapatite coatings10.1016/S0022-4596(02)00085-3 ↗
20. Phase purity of sol–gel-derived hydroxyapatite ceramic10.1016/S0142-9612(00)00448-8 ↗
21. Chemical modification of titanium surface: effect on apatite deposition10.4028/www.scientific.net/KEM.240-242.461 ↗