Effect of substitution of cobalt with iron on electrochemical behavior and solid electrolyte interface of LiNi0.8Co0.15Al0.05O2
Source abstract
Abstract
Abstract Partial substitution of Co with Fe in LiNi0.8Co0.15Al0.05O2 is carried out via ball-milling followed by a two-step solid reaction. The LiNi0.8Co0.15-yFeyAl0.05O2 (0 ≤ y ≤ 0.15) samples exhibit significantly improved cyclic stability compared to pristine LiNi0.8Co0.15Al0.05O2, although the specific capacity decreases with increasing of the Fe content. In particular, the LiNi0.8Co0.075Fe0.075Al0.05O2 material exhibits high capacity retention of 88.4% at 1 C after 350 cycles, relative to that of 55.7% for the pristine LiNi0.8Co0.15Al0.05O2. This phenomenon is more obvious at high rate and elevated temperature. The electrochemical impedance spectra and X-ray photoelectron spectra analysis demonstrate that less solid electrolyte interface film is formed on LiNi0.8Co0.075Fe0.075Al0.05O2 than LiNi0.8Co0.15Al0.05O2. The significantly improved cyclability is mainly attributed to the effect of the FeO6 octahedron on the edge-shared NiO6 octahedra via enhanced electron localization. As a result, the tendency to generate reactive oxygen species at the interface could be reduced, leading to suppression of the oxidation of the electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Local-probe studies of degradation of composite LiNi0.8Co 0.15Al0.05O2 cathodes in high-power lithium-ion cells10.1149/1.1793771 ↗
2. Advanced cathode materials for high-power applications10.1016/j.jpowsour.2005.03.227 ↗
3. Influence of morphology on the stability of LiNiO210.1016/S0378-7753(96)02566-9 ↗
4. Soft chemistry synthesis and characterization of layered Li1−xNi1−yCoyO2−δ (0 ≤ x ≤ 1 and 0 ≤ y ≤ 1)10.1021/cm0102537 ↗
5. Effect of aluminium doping on cathodic behaviour of LiNi0.7Co0.3O210.1016/S0378-7753(00)00559-0 ↗
6. Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature10.1016/S0378-7753(02)00363-4 ↗
7. Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power10.1016/j.jpowsour.2004.02.030 ↗
8. Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells10.1016/S1388-2481(02)00388-0 ↗
9. Effects of cation mixing on the electrochemical lithium intercalation reaction into porous Li1−δNi1−yCoyO2 electrodes10.1016/0167-2738(96)00269-X ↗
10. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
11. Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO210.1016/j.jpowsour.2007.04.083 ↗
12. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗
13. A review on electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2006.07.074 ↗
14. Enhanced electrochemical performance and thermal stability of LiNi0.80Co0.15Al0.05O2 via nano-sized LiMnPO4 coating10.1016/j.electacta.2016.10.158 ↗
15. Synthesis of Mg-doped LiNi0.8Co0.15Al0.05O2 oxide and its electrochemical behavior in high-voltage lithium-ion batteries10.1016/j.ceramint.2014.05.029 ↗
16. Effect of Mg-doping on the degradation of LiNiO2-based cathode materials by combined spectroscopic methods10.1016/j.jpowsour.2012.01.071 ↗
17. Effect of metal (Mn, Ti) doping on NCA cathode materials for lithium Iion batteries10.1155/2018/8082502 ↗
18. The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material10.1016/j.jpowsour.2017.11.020 ↗
19. Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15A10.05O210.1016/j.electacta.2015.06.099 ↗
20. Effects of iron doping at 55 °C on LiNi0.85Co0.10Al0.05O210.3938/jkps.65.243 ↗
21. Structural analysis of iron-doped LiNi0.85Co0.10Al0.05O2 cathode materials for lithium-ion batteries10.1166/jnn.2016.13212 ↗
22. Effects of iron substitution for nickel on electrochemical properties of LiNi0.8Co0.2O2 for lithium rechargeable batteries10.1016/S0378-7753(01)00780-7 ↗
23. Synthesis and characterization of layered Li1−x (Ni0.5Co0.5)1−y FeyO2 (0 ≤ (1 − x) ≤ 1 and 0 ≤ y ≤ 0.2) cathodes10.1016/j.ssi.2006.02.020 ↗
24. Electrochemical characterizations of Fe-substituted LiNiO2 synthesized in air by the combustion method10.1016/j.ceramint.2010.01.008 ↗
25. A high performance layered transition metal oxide cathode material obtained by simultaneous aluminum and iron cationic substitution10.1016/j.jpowsour.2014.06.048 ↗
26. A comparative study on structural changes of LiCo1/3Ni1/3Mn1/3O2 and LiNi0.8Co0.15Al0.05O2 during first charge using in situ XRD10.1016/j.elecom.2006.06.005 ↗
27. Na-doped LiNi0.8Co0.15Al0.05O2 with excellent stability of both capacity and potential as cathode materials for Li-ion batteries10.1021/acsaem.8b00630 ↗
28. Lithium-ion conductors of the system LiCo1−xFexO2: a first electrochemical investigation10.1016/S0013-4686(00)00683-6 ↗
29. Structure and electrochemistry of LixFeyNi1−yO210.1016/0167-2738(93)90401-N ↗
30. Mixed cobalt and iron substituted lithium nickelate: a structural and electrochemical study10.1016/S0167-2738(00)00767-0 ↗
31. Nickel-rich layered microspheres cathodes: lithium/nickel disordering and electrochemical performance10.1021/am5030726 ↗
32. Synthesis of LiNi0.8Co0.15Al0.05O2 with 5-sulfosalicylic acid as a chelating agent and its electrochemical properties10.1039/C5TA05266A ↗
33. In situ X-ray diffraction and electrochemical studies of Li1−xNiO210.1016/0167-2738(93)90317-V ↗
34. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
35. Synthesis and electrochemical properties of LiNi0.80(Co0.20−xAlx)O2 (x = 0.0 and 0.05) cathodes for Li ion rechargeable batteries10.1016/j.jpowsour.2005.03.186 ↗
36. Factors influencing the chemical lithium extraction rate from layered LiNi1−y−zCoyMnzO2 cathodes10.1016/j.elecom.2004.06.004 ↗
37. High-energy layered oxide cathodes with thin shells for improved surface stability10.1021/cm502774u ↗
38. Enhanced elevated-temperature performance of LiNi0.8Co0.15Al0.05O2 electrodes coated with Li2O-2B2O3 glass10.1016/j.electacta.2014.05.056 ↗
39. XPS study on Al2O3- and AlPO4-coated LiCoO2 cathode material for high-capacity Li ion batteries10.1149/1.2789299 ↗
40. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
41. Large polarization of Li4Ti5O12 lithiated to 0 V at large charge/discharge rates10.1021/acsami.6b04239 ↗
42. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases10.1002/aenm.201800297 ↗
43. Electronically conductive Sb-doped SnO2 nanoparticles coated LiNi0.8Co0.15Al0.05O2 cathode material with enhanced electrochemical properties for Li-ion batteries10.1016/j.electacta.2017.03.215 ↗
44. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo1/3Ni1/3Mn1/3O210.1021/ja108588y ↗
45. Influence of cationic substitutions on the first charge and reversible capacities of lithium-rich layered oxide cathodes10.1039/c3ta11703k ↗
46. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
47. Electrode–electrolyte Interface in Li-ion batteries: current understanding and new insights10.1021/acs.jpclett.5b01727 ↗
48. Chemical, structural, and transport properties of Na1−xCoO210.1103/PhysRevB.68.075108 ↗
49. Dean · 1998