Evaluating the role of precursor concentration in facile conformal coating of sub-micrometer thick Cu2ZnSnS4 films using non-toxic ethanol based solutions
Source abstract
Abstract
Abstract Although non-toxic solution processing offers a scalable approach for growth of Cu2ZnSnS4 (CZTS) thin films, it must suppress the formation of secondary phases and yield facile conformal large grained films with minimum process steps. While growing CZTS films from environment-friendly ethanol based solutions, here we demonstrate how precursor concentration and post sulfurization critically affect the reaction pathway and morphology of the films. Deposition from lower ionic concentration precursor solution and sulfurization with nominal sulfur amount yielded phase-pure films. However, the thickness and grain size of these films were far lower than that desired for solar cell application, thus necessitating overlay depositions to achieve desired thickness and grain size. This issue was alleviated by increasing the ionic concentration in the precursor solution and the sulfur amount during sulfurization. It was found that coating from 1 M Cu-solution in just two dipping cycles followed by sulfurization at 500 °C yielded phase pure kesterite CZTS films of ~850 nm thickness. In addition, differently with the reported bilayered structure, the films exhibit a uniform microstructure with reasonably large grains. The resulting films showed the bandgap of 1.42 eV and very high photosensitivity upon illumination of white light.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Scheer · 2011
2. Adachi · 2015
3. Kodigala · 2013
4. Cu2 ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
5. Electronic structure and stability of quaternary chalcogenide semiconductors derived from cation cross-substitution of II-VI and I-III-VI2 compounds10.1103/PhysRevB.79.165211 ↗
6. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
7. Structure flexibility of the Cu2ZnSnS4 absorber in low-cost photovoltaic cells: from the stoichiometric to the copper-poor compounds10.1021/ic202569q ↗
8. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
9. Large-grained Cu2ZnSnS4 layers sintered from Sn-rich solution-deposited precursors10.1002/pssa.201431147 ↗
10. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
11. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
12. Human health perspective on environmental exposure to hydrazines: a review10.1016/S0045-6535(98)00088-5 ↗
13. Carcinogenicity of hydrazine and 1, 1-dimethylhydrazine for mouse lung10.1038/216375a0 ↗
14. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
15. 8% efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
16. Aqueous synthesis of high-quality Cu2ZnSnS4 nanocrystals and their thermal annealing characteristics10.1021/acs.langmuir.7b03885 ↗
17. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route10.1039/C3TA13533K ↗
18. Cu2ZnSn(S1−XSex)4 thin film solar cells prepared by water-based solution process10.1002/pssr.201308215 ↗
19. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
20. Evolution of morphology and composition during annealing and selenization in solution-processed Cu2ZnSn(S,Se)410.1021/acs.chemmater.7b03313 ↗
21. High-efficiency Cu2ZnSn(S,Se)4 solar cells fabricated through a low-cost solution process and a two-step heat treatment10.1002/pip.2810 ↗
22. Fine-tuning the Sn content in CZTSSe thin films to achieve 10.8% solar cell efficiency from spray-deposited water-ethanol-based colloidal inks10.1002/aenm.201501404 ↗
23. A non-toxic, solution-processed, earth abundant absorbing layer for thin-film solar cells10.1039/C1EE02314D ↗
24. All solution-processed chalcogenide solar cells-from single functional layers towards a 13.8% efficient CIGS device10.1002/adfm.201402288 ↗
25. Novel solution processing of high-efficiency earth-abundant Cu2ZnSn(S,Se)4 solar cells10.1002/adma.201201785 ↗
26. Hodes · 2003
27. Cu2ZnSnS4 thin films grown by dip-coating: effects of annealing10.1016/j.jallcom.2015.11.233 ↗
28. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
29. Reaction routes for the formation of a Cu2ZnSnS4 absorber material from homogenous ethanol-based solution10.1039/c3ra42746c ↗
30. Ethylene glycol-based dip coating route for the synthesis of Cu2ZnSnS4 thin film10.1016/j.matlet.2012.10.120 ↗
31. One-step deposition of Cu2ZnSnS4 thin films for solar cells10.1016/j.solmat.2013.05.039 ↗
32. A water-and sulfurization-free solution route to Cu2−XZn1+XSnS410.1007/s10971-014-3462-x ↗
33. Non-vacuum processed Cu2ZnSnS4 thin films: influence of copper precursor on structural, optical and morphological properties10.1016/j.jallcom.2014.05.140 ↗
34. Synthesis of Cu2ZnSnS4 thin films by dip-coating method without sulphurization10.1007/s10971-013-3006-9 ↗
35. Annealing induced shape transformation of CZTS nanorods based thin films10.1021/acs.langmuir.7b01433 ↗
36. Growth control of molybdenum thin films with simultaneously improved adhesion and conductivity via sputtering for thin film solar cell application10.1016/j.vacuum.2018.12.050 ↗
37. Pauling · 1970
38. Solid-state NMR and Raman spectroscopy to address the local structure of defects and the tricky issue of the Cu/Zn disorder in cu-poor, Zn-rich CZTS materials10.1021/ic5012346 ↗
39. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
40. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments
41. Phase-selective synthesis of Cu2ZnSnS4 nanocrystals using different sulfur precursors10.1021/ic500956n ↗
42. Nanoparticle ligands and pyrolized graphitic carbon in CZTSSe photovoltaic devices10.1021/acs.chemmater.5b03426 ↗
43. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
44. On the Interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗
45. Fabrication of CZTS thin films by dip coating technique for solar cell applications10.1016/j.materresbull.2016.10.033 ↗
46. Synthesis of Cu2ZnSnS4 thin film absorbers by sulfurizing dip-coated precursors
47. A low temperature order-disorder transition in Cu2ZnSnS4 thin films
48. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS4
49. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
50. Direct liquid coating of chalcopyrite light-absorbing layers for photovoltaic devices10.1002/ejic.200900837 ↗
51. Investigation of Cu2ZnSnS4 formation from metal salts and thioacetamide10.1021/cm100058q ↗
52. Cu2ZnSnS4 thin film solar cells prepared by non-vacuum processing10.1016/j.solmat.2008.12.009 ↗
53. Tuning bandgap of p-type Cu2Zn(Sn,Ge)(S,Se)4 semiconductor thin films via aqueous polymer-assisted deposition10.1021/acsami.6b13683 ↗
54. Versatile and low-toxic solution approach to binary, ternary, and quaternary metal sulfide thin films and its application in Cu2ZnSn(S,Se)4 solar cells10.1021/cm5002412 ↗
55. Output properties of C60 field-effect transistors with Au electrodes modified by 1-alkanethiols10.1021/jp0708751 ↗
56. Nanowire piezo-phototronic photodetector: theory and experimental design10.1002/adma.201104333 ↗
57. Back-to-back Schottky diodes: the generalization of the diode theory in analysis and extraction of electrical parameters of nanodevices10.1088/0953-8984/24/22/225303 ↗
58. 2008 · 12
59. Reconstructing the energy band electronic structure of pulsed laser deposited CZTS thin films intended for solar cell absorber applications10.1016/j.apsusc.2016.11.210 ↗