journal article·2018-02

Ohmic contact mechanism for RF superimposed DC sputtered-ITO transparent p-electrodes with a variety of Sn2O3 content for GaN-based light-emitting diodes

Tae Kyoung Kim, Yeo Jin Yoon, Seung Kyu Oh, Yu Lim Lee, Yu-Jung Cha, Joon Seop Kwak

Publisher page

Abstract

Abstract The dependence of the electrical and optical properties of radio frequency (RF) superimposed direct current (DC) sputtered–indium tin oxide (ITO) on the tin oxide (Sn2O3) content of the ITO is investigated, in order to elucidate an ohmic contact mechanism for the sputtered-ITO transparent electrodes on p-type gallium nitride (p-GaN). Contact resistivity of the RF superimposed DC sputtered-ITO on p-GaN in LEDs decreased when Sn2O3 content was increased from 3 wt% to 7 wt% because of the reduced sheet resistance of the sputtered-ITO with the increasing Sn2O3 content. Further increases in Sn2O3 content from 7 wt% to 15 wt% resulted in deterioration of the contact resistivity, which can be attributed to reduction of the work function of the ITO with increasing Sn2O3 content, followed by increasing Schottky barrier height at the sputtered ITO/p-GaN interface. Temperature-dependent contact resistivity of the sputtered-ITO on p-GaN also revealed that the ITO contacts with 7 wt% Sn2O3 yielded the lowest effective barrier height of 0.039 eV. Based on these results, we devised sputtered-ITO transparent p-electrodes having dual compositions of Sn2O3 content (7/10 wt%). The radiant intensity of LEDs having sputtered-ITO transparent p-electrodes with the dual compositions (7/10 wt%) was enhanced by 13% compared to LEDs having ITO with Sn2O3 content of 7 wt% only.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · ZnO doping and properties · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Integrated high resolution LED light sources in an AFS/ADB headlamp
2. LED lighting in horticulture10.21273/HORTSCI.43.7.1947 ↗
3. Thermal module design and analysis of a 230W LED illumination lamp under three incline angles10.1016/j.mejo.2014.01.016 ↗
4. Improvement of the luminous intensity of light-emitting diodes by using highly transparent Ag-indium tin oxide p-type ohmic contacts10.1109/LPT.2004.839783 ↗
5. In/ITO p-type electrode for high-brightness GaN-based light emitting diodes10.1149/1.2750442 ↗
6. Electron beam irradiated ITO films as highly transparent p-type electrodes for GaN-based LEDs10.1166/jnn.2013.7071 ↗
7. Structural optical, and electrical properties of E-beam and sputter-deposited ITO films for LED applications10.1007/s13391-011-0610-0 ↗
8. Indium tin oxide contacts to gallium nitride optoelectronic devices10.1063/1.124227 ↗
9. A study of transparent indium tin oxide (ITO) contact to p-GaN10.1016/S0040-6090(01)01368-2 ↗
10. Lee · 2014
11. Temperature-dependent contact resistivity of radio frequency superimposed direct current sputtered indiumtin oxide ohmic contact to p-type gallium nitride10.1016/j.tsf.2015.04.067 ↗
12. Properties of ITO films deposited by RF superimposed DC magnetron sputtering10.1016/j.cap.2009.01.031 ↗
13. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
14. Evaporated Sn-doped In2O3 films: basic optical properties and applications to energy-efficient windows10.1063/1.337534 ↗
15. Schroder · 1998
16. Temperature dependence of Al/Ti-based ohmic contact to GaN devices: HEMT and MOSFET10.1016/j.mee.2011.06.015 ↗
17. Carrier density dependence of optical band gap and work function in Sn-doped In2O3 films10.1143/APEX.3.061101 ↗
18. Temperature-dependent contact resistivity of the nonalloyed ohmic contacts to p-GaN10.1063/1.1691178 ↗
19. Carrier transport mechanism of Pd/Pt/Au ohmic contacts to p-GaN in InGaN laser diode10.1002/1521-396X(200212)194:2<587::AID-PSSA587>3.0.CO;2-O ↗
20. Abnormal dependence of contact resistivity on hole concentration in nonalloyed ohmic contacts to p-GaN10.1063/1.1478154 ↗
21. Conduction in non-crystalline materials: III. Localized states in a pseudogap and near extremities of conduction and valence bands10.1063/1.103345 ↗
22. Rate equation analysis of efficiency droop in InGaN light-emitting diodes10.1063/1.3216578 ↗