journal article·2012-02

Interaction of platelets, fibrinogen and endothelial cells with plasma deposited PEO-like films

Zhilu Yang, Jin Wang, Xin Li, Qiufen Tu, Hong Sun, Nan Huang

Applied Surface Science· Volume 258· Issue 8
Publisher page

Abstract

Abstract For blood-contacting biomedical implants like retrievable vena cava filters, surface-based diagnostic devices or in vivo sensors, limiting thrombosis and cell adhesion is paramount, due to a decrease even failure in performance. Plasma deposited PEO-like films were investigated as surface modifications. In this work, mixed gas composed of tetraethylene glycol dimethyl ether (tetraglyme) vapor and oxygen was used as precursor. It was revealed that plasma polymerization under high ratio of oxygen/tetraglyme led to deposition of the films that had high content of ether groups. This kind of PEO-like films had good stability in phosphate buffer solution. In vitro hemocompatibility and endothelial cell (EC) adhesion revealed low platelet adhesion, platelet activation, fibrinogen adhesion, EC adhesion and proliferation on such plasma deposited PEO-like films. This made it a potential candidate for the applications in anti-fouling surfaces of blood-contacting biomedical devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Surface Interaction Studies · Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Ultralow-fouling, functionalizable, and hydrolyzable zwitterionic materials and their derivatives for biological applications10.1002/adma.200901407 ↗
2. Harris · 1992
3. PEO-like plasma polymerized tetraglyme surface interactions with leukocytes and proteins: in vitro and in vivo studies10.1163/156856202320253910 ↗
4. Plasma-deposited tetraglyme surfaces greatly reduce total blood protein adsorption, contact activation, platelet adhesion, platelet procoagulant activity, and in vitro thrombus deposition
5. Poly(ethylene oxide)-like plasma polymers produced by plasma-assisted vacuum evaporation10.1002/ppap.200900153 ↗
6. Effect of polysaccharide structure on protein adsorption10.1016/S0927-7765(99)00086-7 ↗
7. Self-assembled monolayers of alkanethiolates presenting mannitol groups are inert to protein adsorption and cell attachment10.1021/la0004653 ↗
8. Polymeric thin films that resist the adsorption of proteins and the adhesion of bacteria10.1021/la001222d ↗
9. Protein-functionalized polymer brushes10.1021/bm050016n ↗
10. Peptide-based SAMs that resist the adsorption of proteins10.1021/ja8065754 ↗
11. Functionalizable and ultra stable nanoparticles coated with zwitterionic poly(carboxybetaine) in undiluted blood serum10.1016/j.biomaterials.2009.06.036 ↗
12. Functionalizable and ultra-low fouling zwitterionic surfaces via adhesive mussel mimetic linkages10.1016/j.biomaterials.2009.11.025 ↗
13. Zwitterionic polymers exhibiting high resistance to nonspecific protein adsorption from human serum and plasma10.1021/bm701301s ↗
14. Advanced substrate fabrication for cell microarrays10.1021/bm801217n ↗
15. Functionalized poly(ethylene glycol)-grafted polysiloxane monolayers for control of protein binding10.1021/la011423x ↗
16. Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility10.1016/j.biomaterials.2004.09.032 ↗
17. Protein adsorption to oligo(ethylene glycol) self-assembled monolayers: experiments with fibrinogen, heparinized plasma, and serum10.1163/156856201316883421 ↗
18. Adsorption of proteins onto surfaces containing end-attached oligo(ethylene oxide): a model system using self-assembled monolayers10.1021/ja00076a032 ↗
19. Surface chemical analysis of plasma-deposited copolymer films prepared from feed gas mixtures of ethylene or styrene with allyl alcohol10.1002/ppap.200600215 ↗
20. Allylamine plasma polymer coatings of interior surfaces in small trench structures10.1002/ppap.200700104 ↗
21. Some important aspects of plasma polymerization10.1002/ppap.200400071 ↗
22. A novel technique toward bipolar films containing alternating nano-layers of allylamine and acrylic acid plasma polymers for biomedical application10.1002/ppap.201000111 ↗
23. The covalent immobilization of heparin to pulsed-plasma polymeric allylamine films on 316L stainless steel and the resulting effects on hemocompatibility10.1016/j.biomaterials.2009.11.091 ↗
24. Plasma deposition and surface characterization of oligoglyme, dioxane, and crown ether nonfouling films10.1021/la036274s ↗
25. Super water-repellent surfaces resulting from fractal structure10.1021/jp9616728 ↗
26. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
27. Resistance of solid surfaces10.1021/ie50320a024 ↗
28. Wettability of porous surfaces10.1039/tf9444000546 ↗
29. Application of enzyme immunoassays for testing haemocompatibility of biomedical polymers10.1016/0142-9612(95)94909-5 ↗
30. Human plasma fibrinogen adsorption and platelet adhesion to polystyrene10.1002/(SICI)1097-4636(199902)44:2<130::AID-JBM2>3.0.CO;2-9 ↗
31. Fluid mechanics of vascular systems, diseases, and thrombosis10.1146/annurev.bioeng.1.1.299 ↗
32. Basic mechanisms in blood coagulation10.1146/annurev.bi.44.070175.004055 ↗
33. Effect of heparin-PVA hydrogel on platelets in a chronic canine arterio-venous shunt10.1002/jbm.820230404 ↗
34. Blood-compatibility-water-content relationships for radiation-grafted hydrogels