journal article·2014-10

Fe–0.4wt.%C–6.5wt.%Cr hardfacing coating: Microstructures and wear resistance with La2O3 additive

Xiaoru Hou, Bin Zhao, Jian Yang, Xiaolei Xing, Yefei Zhou, Yulin Yang, Qingxiang Yang

Publisher page

Abstract

Abstract Flux-cored wires with different La 2 O 3 additives were developed. The microstructures of the hardfacing coatings were observed by optical microscopy (OM) and field emission scanning electron microscope (FESEM). The phase structures were determined by X-ray diffraction (XRD). The hardness, wear resistance and friction coefficient of the hardfacing coatings were measured by Rockwell hardness tester, unilateral abrasive belt wear testing machine and CETR reciprocating wear testing machine, respectively. At last, the worn morphologies of the hardfacing coatings were observed by FESEM. The results indicate that, the microstructures of the hardfacing coatings consist of needle-like martensite, high alloy matensite and retained austenite. With the increase of La 2 O 3 additive, the high alloy matensite dissolves in the matrix gradually and the amount of retained austenite is not changed basically after it is increased firstly. When La 2 O 3 addition is 0.70 wt.%, the grain size of the hardfacing coating is the smallest, which is 18 μm and the average hardness is the highest. Unidirectional abrasive belt wear test shows that the high alloy martensite can be as wear-resistance phase during the wear process of the hardfacing coatings. When the La 2 O 3 addition is 0.35 wt.%, the unidirectional wear resistance of the hardfacing coating is the highest. Reciprocating wear test shows that with the increase of the La 2 O 3 additives, the friction coefficient is decreased and the reciprocating wear resistance is increased. When La 2 O 3 addition is 0.70 wt.% the reciprocating wear resistance is the highest.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Strain hardening of austenite in Fe–Cr–C–V alloys under repeated impact10.1016/j.wear.2011.02.006 ↗
2. Microstructure and wear properties of Fe–15Cr–2.5Ti–2C–xB wt% hardfacing alloys10.1016/j.apsusc.2013.01.169 ↗
3. A comparison of the abrasive wear behavior of iron–chromium based hardfaced coatings deposited by SMAW and electric arc spraying10.1016/j.wear.2007.04.008 ↗
4. Optimisation of multiple quality characteristics of hardfacing using grey-based Taguchi method10.1016/j.matdes.2011.04.050 ↗
5. Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium Fe–Cr–C hardfacing alloys10.1016/j.surfcoat.2006.01.010 ↗
6. Wear behavior of ceramic powder cladding on an S50C steel surface10.1016/S0301-679X(02)00094-4 ↗
7. The effect of microstructure on abrasive wear of hardfacing alloys10.1016/j.wear.2005.03.002 ↗
8. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
9. Microstructure and abrasive wear properties of Fe–Cr–C hardfacing alloy cladding manufactured by gas tungsten arc welding (GTAW)
10. Effect of rare earth elements on microstructure and oxidation behaviour in TIG weldments of AISI 316L stainless steel10.1016/j.msea.2006.05.063 ↗
11. New study concerning development of application of rare earth metals in steels10.1016/j.jallcom.2005.04.090 ↗
12. Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements modification10.1016/j.msea.2006.08.113 ↗
13. A study of the microstructures and properties of Fe–V–W–Mo alloy modified by rare earth10.1016/j.msea.2004.12.029 ↗
14. Influence of rare earth elements on solidification behavior of a high speed steel for roll using differential scanning calorimetry10.1016/S1002-0721(10)60604-7 ↗
15. Comparison of corrosion modes of oxidation and sulphidation of weld metal with rare earth oxides10.1179/174329308X271706 ↗
16. Effect of rare earth oxides on the morphology of carbides in hardfacing metal of high chromium cast iron10.1016/S1002-0721(10)60425-5 ↗
17. Effect of Ti additive on (Cr, Fe)7C3 carbide in arc surfacing layer and its refined mechanism10.1016/j.apsusc.2012.03.101 ↗
18. First-principles calculations on LaAlO3 as the heterogeneous nucleus of the austenite10.1016/j.comptc.2013.12.023 ↗
19. Microstructure and wear resistance of the hypereutectic Fe–Cr–C alloy hardfacing metals with different La2O3 additives10.1016/j.apsusc.2013.10.186 ↗
20. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
21. Variation of hardness of metals with grain size10.1038/173948b0 ↗
22. Normal Hall–Petch behavior of mild steel with submicron grains10.1016/S0167-577X(02)01377-0 ↗
23. The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni–P coatings10.1016/S1359-6462(02)00633-4 ↗