Fabrication of grating structures by simultaneous multi-spot fs laser writing

Abstract Two-photon polymerisation is an established technique for the fabrication of three-dimensional microstructures. To date structures have mostly been developed using single beam serial writing. A novel approach to simultaneous multi-spot two-photon polymerisation, that uses a SiO 2 on glass Fraunhofer diffractive optical element to generate an array of beamlets, is described. A Ti:sapphire laser, with wavelength 790 nm, 80 MHz repetition rate, 100 fs pulse duration and an average power of 25 mW, was used to initiate two-photon polymerisation. The DOE, in combination with a high power microscope objective, efficiently transforms the laser beam into a linear array of four spots of equal intensity. The fabrication of a periodic transmission grating, using parallel processing with these four spots, is shown. The grating was written in a Zr-loaded resin prepared on a glass substrate using dip coating deposition of a Zr/PMMA hybrid prepared by the sol–gel method. The operation of the diffractive element and the performance of the diffraction grating are also discussed.