journal article·2021-01

High temperature nanomechanical and nanotribological behavior of sub-5 nm nitrogen-doped carbon overcoat films

Ahmad Shakil, Ahmad Amiri, Huan Tang, Andreas A. Polycarpou

Publisher page

Abstract

Abstract Elevated temperature tribological properties of ultra-thin nitrogen-doped carbon overcoat (NCOC) protective film for magnetic disks were investigated. NCOC with three different thicknesses (2.5, 3.5, and 4.5 nm) were examined in terms of both chemical and mechanical properties at temperatures up to 300 °C. The chemical changes were traced by XPS, revealing that the configuration of both carbon and nitrogen elements change partially from sp3- to sp2-hybridizations with exposure of NCOC samples to annealing. The friction coefficient, wear rate, and deformation of the NCOC films were measured using nanoscratch/wear experiments. Three sets of mechanical experiments verified the operating temperature and thickness dependence of the tribological behavior of the NCOC films. The NCOC samples show that the average wear depth is acceptably small after exposure to annealing, thus offering durable films for high temperature applications. Noteworthy, the permanent reduction in mechanical properties associated with annealing reduces in the presence of N dopants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
2. Tribology of diamond-like carbon films: recent progress and future prospects10.1088/0022-3727/39/18/R01 ↗
3. Analysis of microwear experiments on thin DLC coatings: friction, wear and plastic deformation10.1016/S0043-1648(03)00188-1 ↗
4. Structural stability of hydrogenated amorphous carbon overcoats used in heat-assisted magnetic recording investigated by rapid thermal annealing10.1063/1.4792521 ↗
5. Requirements of ultrathin carbon coatings for magnetic storage technology10.1016/S0301-679X(02)00216-5 ↗
6. High temperature nanotribology of ultra-thin hydrogenated amorphous carbon coatings10.1016/j.carbon.2017.07.047 ↗
7. R. Wäsche, R. Ehrke, R. Kramer, A.R. Jayachandran, G. Brandt, Influence of temperature on tribological behaviour of DLC coatings under lubricated conditions up to 250 °C, 2018, pp. 253–254.
8. Thermal stability of ultrathin amorphous carbon films for energy-assisted magnetic recording10.1109/TMAG.2011.2139221 ↗
9. Carbon overcoat oxidation in heat-assisted magnetic recording10.1109/TMAG.2012.2236645 ↗
10. Effect of carbon overcoat on heat-assisted magnetic recording performance
11. Nitrogen-induced modifications in microstructure and wear durability of ultrathin amorphous-carbon films10.1063/1.367009 ↗
12. Structural characterization of nitrogen doped diamond-like carbon films deposited by arc ion plating10.1016/j.apsusc.2004.07.043 ↗
13. Role of nitrogen in the formation of hard and elastic (formula presented) thin films by reactive magnetron sputtering10.1103/PhysRevB.59.5162 ↗
14. Nanomechanical and nanotribological properties of carbon-based thin films: a review10.1016/j.ijrmhm.2009.08.003 ↗
15. Spectroscopy of π bonding in hard graphitic carbon nitride films: superstructure of basal planes and hardening mechanisms10.1103/PhysRevB.62.4261 ↗
16. Hard and elastic amorphous carbon nitride thin films studied by (formula presented) nuclear magnetic resonance spectroscopy10.1103/PhysRevB.66.153402 ↗
17. Tribological and mechanical properties of carbon nitride thin coating prepared by ion-beam-assisted deposition10.1007/BF00182544 ↗
18. Interpretation of infrared and Raman spectra of amorphous carbon nitrides10.1103/PhysRevB.67.155306 ↗
19. Influence of nitrogen and temperature on the deposition of tetrahedrally bonded amorphous carbon10.1063/1.373790 ↗
20. Structural, mechanical and tribological properties of plasma-assisted chemically vapour deposited hydrogenated CxN1−x: H films10.1016/0257-8972(94)90227-5 ↗
21. Media roughness and head-media spacing in heat-assisted magnetic recording10.1109/TMAG.2013.2291684 ↗
22. Head-disk interface materials issues in heat-assisted magnetic recording10.1109/TMAG.2013.2283068 ↗
23. AFM observation of diamond indenters after oxidation at elevated temperatures10.1016/j.diamond.2010.07.004 ↗
24. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
25. High-temperature oxidation behaviors of CVD diamond films10.1016/j.apsusc.2009.08.042 ↗
26. Determination of hardness from nanoscratch experiments: corrections for interfacial shear stress and elastic recovery10.1557/JMR.2003.0301 ↗
27. Nanomechanical property and nanowear measurements for sub-10-nm thick films in magnetic storage10.1007/s11340-006-9393-x ↗
28. Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis10.1557/JMR.2008.0279 ↗
29. Direct evaluation of the sp3 content in diamond-like-carbon films by XPS10.1016/S0169-4332(98)00319-5 ↗
30. Toughness and strength of nanocrystalline graphene10.1038/ncomms10546 ↗
31. Review on recent progress in nitrogen-doped graphene: synthesis, characterization, and its potential applications10.1021/cs200652y ↗
32. Synthesis of nitrogen-doped graphene films for lithium battery application10.1021/nn101926g ↗
33. Charge transfer and electronic doping in nitrogen-doped graphene10.1038/srep14564 ↗
34. Connecting dopant bond type with electronic structure in N-doped graphene10.1021/nl301409h ↗
35. Controlled synthesis of nitrogen-doped graphene on ruthenium from azafullerene10.1021/acs.nanolett.7b00038 ↗
36. Study of structure, tribological properties and growth mechanism of DLC and nitrogen-doped DLC films deposited by electrochemical technique10.1016/j.apsusc.2004.05.005 ↗
37. Chemical, mechanical and tribological characterization of ultra-thin and hard amorphous carbon coatings as thin as 3.5 nm: recent developments10.1016/S0925-9635(99)00158-2 ↗
38. Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks10.1557/PROC-383-447 ↗
39. Probing the low-friction mechanism of diamond-like carbon by varying of sliding velocity and vacuum pressure10.1016/j.carbon.2013.08.065 ↗
40. Friction, lubrication and wear: a survey of work during the last decade10.1088/0508-3443/17/12/301 ↗
41. Static friction coefficient model for metallic rough surfaces10.1115/1.3261575 ↗
42. Molecular-scale tribology of amorphous carbon coatings: effects of film thickness, adhesion, and long-range interactions10.1021/ja0178618 ↗
43. Mechanical property measurements of thin-film carbon overcoat on recording media towards 1Tbit∕in210.1063/1.2166595 ↗
44. Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques10.1016/j.wear.2009.11.001 ↗
45. Nanometre scale mechanical properties of extremely thin diamond-like carbon films10.1179/175158309X12586382418535 ↗
46. Nanowear of hafnium diboride thin films10.1080/10402001003753341 ↗
47. Complete characterization by Raman spectroscopy of the structural properties of thin hydrogenated diamond-like carbon films exposed to rapid thermal annealing10.1063/1.4896838 ↗