journal article·2014-08

Controlled crystalline orientation of SrTiO3 thin films grown on Pt(111)/Ti/α-Al2O3(0001) substrates: Effect of growth temperature and Ti layer thickness

Gasidit Panomsuwan, Osamu Takai, Nagahiro Saito

Publisher page

Abstract

Abstract SrTiO 3 (STO) thin films were grown on Pt(1 1 1)/Ti/ α -Al 2 O 3 (0 0 0 1) substrates by ion beam sputter deposition. Growth temperature was varied between 600 and 750 °C, while Ti layer thickness was adjusted from 3 to 36 nm. Experimental results demonstrate that both the crystalline orientation and surface morphology are significantly dependent on change in the growth temperature and Ti layer thickness. From X-ray structural analysis, the STO thin films grown at 600 °C are perfectly (1 1 0)-oriented in spite of the change in Ti layer thickness. The STO thin films with a perfect (1 1 1) orientation are achievable at a sufficiently high growth temperature (≥700 °C) and a thin Ti layer (3–6 nm). Each crystalline orientation of STO thin films has a specific in-plane orientation relationship with respect to the Pt(1 1 1) layer. Flat-, rod-, and triangle-shaped grains are clearly observed from atomic force microscopy investigation, which are associated with the (1 1 0)-, (1 0 0)-, and (1 1 1)-oriented grains, respectively. Their grain orientations also show a good correlation with the X-ray structural analysis. The growth mechanism of each crystalline orientation can be described in term of surface diffusion, surface energy anisotropy, electrostatic, and role of TiO x seeds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Reversible resistive switching of SrTiOx thin films for non-volatile memory applications10.1063/1.2178405 ↗
2. Enhanced memory window of Au/BaTiO3/SrTiO3/Si(001) MFIS structure with high c-axis orientation for non-volatile memory applications10.1007/s00339-012-7011-6 ↗
3. SrTiO3 thin film capacitors on silicon substrates with insignificant interfacial passive layers10.1063/1.3495990 ↗
4. Enhanced electrical properties of SrTiO3 thin films grown by atomic layer deposition at high temperature for dynamic random access memory applications10.1063/1.2939102 ↗
5. Enhanced dielectric properties of SrTiO3 epitaxial thin film for tunable microwave devices10.1063/1.1428411 ↗
6. Room-temperature tunable microwave properties of strained SrTiO3 films10.1063/1.1813641 ↗
7. High-resolution X-ray reflectivity study of thin layered Pt-electrodes for integrated ferroelectric devices10.1088/0022-3727/34/10A/336 ↗
8. Thermal stability of Pt bottom electrodes for ferroelectric capacitors10.1143/JJAP.37.L465 ↗
9. Orientation dependent microwave dielectric properties of ferroelectric Ba1−xSrxTiO3 thin films10.1063/1.1609658 ↗
10. Microstructure and dielectric properties of textured SrTiO3 thin films10.1111/j.1551-2916.2005.00195.x ↗
11. Laser molecular beam epitaxy growth and properties of SrTiO3 thin films for microelectronic applications10.1016/j.tsf.2005.12.297 ↗
12. Effects of ultrathin TiOx seeding layer on crystalline orientation and electrical properties of sputtered (Ba, Sr)TiO3 thin films10.1111/j.1551-2916.2010.03677.x ↗
13. Growth of highly (110)- and (111)-textured SrTiO3 thin films on Pt(111)/α-Al2O3(0001) substrates by ECR ion beam sputter deposition10.1016/j.ssc.2012.12.026 ↗
14. Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba0.5Sr0.5TiO3 thin films10.1063/1.3256160 ↗
15. Microwave properties of epitaxial (111)-oriented Ba0.6Sr0.4TiO3 thin films on Al2O3(0001) up to 40GHz10.1063/1.3478015 ↗
16. X-ray combined analysis of fiber-textured and epitaxial Ba(Sr,Ti)O3 thin films deposited by radio frequency sputtering10.1063/1.3592282 ↗
17. Tunable dielectric characteristic of (111)-oriented barium strontium titanate thin films deposited on platinised Si substrates10.1007/s13391-012-2078-y ↗
18. SrTiO3 films on platinized (0001) Al2O3: characterization of texture and nonstoichiometry accommodation10.1557/JMR.2004.0197 ↗
19. The structural and electrical properties of oriented SrTiO3 films prepared by metal organic deposition method10.1016/j.ssc.2010.06.035 ↗
20. Phase transition in textured SrTiO3 thin films on epitaxial Pt electrodes10.1063/1.2171786 ↗
21. Bipolar and unipolar resistive switching behaviors of sol–gel-derived SrTiO3 thin films with different compliance currents10.1088/0268-1242/26/7/075019 ↗
22. Microstructure of epitaxial SrTiO3/Pt/Ti/sapphire heterostructures10.1557/jmr.2005.0282 ↗
23. Fabrication, dielectric and ferroelectric properties Ba0.6Sr0.4TiO3 film with preferred orientation10.1007/s10854-010-0255-z ↗
24. On the formation of an interface amorphous layer in nanostructured ferroelectric Ba0.8Sr0.2TiO3 thin films integrated on Pt-Si and its effect on the electrical properties10.1016/j.apsusc.2012.11.161 ↗
25. Effects of titanium buffer layer on lead–zirconate–titanate crystallization processes in sol-gel deposition technique10.1143/JJAP.34.192 ↗
26. Texture control of PbTiO3 and Pb(Zr, Ti)O3 thin films with TiO2 seeding10.1063/1.366614 ↗
27. Influence of the microstructure of Pt/Si substrates on textured growth of barium titanate thin films prepared by pulsed laser deposition10.1557/JMR.1998.0049 ↗
28. Orientation control of textured PZT thin films sputtered on silicon substrate with TiOx seeding10.1016/S0025-5408(00)00354-8 ↗
29. Contributions to the dielectric losses of textured SrTiO3 thin films with Pt electrodes10.1063/1.2034649 ↗
30. Atomic structure of (111) SrTiO3/Pt interfaces10.1063/1.2191410 ↗
31. Role of Ti out-diffusion from Pt/Ti bi-layer on the crystalline growth of (Ba,Sr)TiO3: a transmission electron microscopy investigation10.1016/j.tsf.2006.03.012 ↗
32. Epitaxial growth of (111)-oriented BaTiO3/SrTiO3 perovskite superlattices on Pt(111)/Ti/Al2O3(0001) substrates10.1063/1.4820780 ↗
33. Orientation control of textured SrTiO3 thin films on platinized α-Al2O3(0001) by an ion beam sputter deposition method10.1088/0022-3727/45/49/494003 ↗
34. Investigation of Pt/Ti bilayer metallization on silicon for ferroelectric thin film integration10.1063/1.355889 ↗
35. Investigation of Pt/Ti bottom electrodes for Pb(Zr,Ti)O3 films10.1143/JJAP.36.294 ↗
36. Characterization of (Ba1−x,Srx)TiO3 thin films deposited on Pt/Ti/SiO2/Si substrates with different Ti buffer layer thicknesses10.1116/1.590889 ↗
37. Titanium diffusion and residual stress of platinum thin films on Ti/SiO2/Si substrate10.1063/1.1949715 ↗
38. Microstrain in Al0.22Ga0.78N/GaN heterostructure studied by X-ray diffraction and scattering10.1016/j.jallcom.2004.11.072 ↗
39. Strain distribution in epitaxial SrTiO3 thin films10.1063/1.2424282 ↗
40. Dislocation density and strain distribution in SrTiO3 film grown on (110)DyScO3 substrate10.1088/0022-3727/42/10/105307 ↗
41. Platinum − a thermal expansion reference material10.1007/BF00534223 ↗
42. Dobrovinskaya · 2009
43. Growth of Ti thin film on sapphire substrate10.1557/JMR.1997.0255 ↗
44. Structure of α-Al2O3 (0001) surface and Ti deposited on α-Al2O3 (0001) substrate; CAICSS and RHEED study10.1016/S0039-6028(99)00706-2 ↗
45. Structure and growth of titanium buffer layers on Al2O3(0001)10.1016/j.susc.2004.03.072 ↗
46. Atomic-scale characterization of SrTiO3 Σ3 (112¯) [1¯10] grain boundary10.1103/PhysRevB.81.134109 ↗
47. Density functional of the Σ3 (111) [1¯10] symmetrical tilt grain boundary in SrTiO3
48. Ab initio study of SrTiO3 surfaces10.1016/S0039-6028(98)00670-0 ↗
49. Surface energy anisotropy of SrTiO3 at 1400°C in air10.1111/j.1151-2916.2003.tb03584.x ↗
50. Shape evolution of SrTiO3 crystals during coarsening in a titania-rich liquid10.1111/j.1551-2916.2005.00185.x ↗