journal article·2019-06

Completely aqueous route for metallization of structural polymeric materials in micro-electro-mechanical systems

Xuan Tuan Le, Jean-Sébastien Poirier, Sébastien Michel

Publisher page

Abstract

Recent developments in the fabrication of micro-electro-mechanical systems (MEMS) are moving away from the deposition/mask/etch paradigm and instead exploiting useful properties of polymers. Many polymeric insulating materials, such as Parylene, PMMA, HSQ, SU-8 and KMPR, have attracted attention in microfabrication lately, because of their low cost and significantly easy processing procedures [1,2]. Metallization of these polymers is required for their integration in MEMS technology. While conventional microfabrication methods for preparing metallic thin films on insulating substrates are limited to vapor deposition techniques, it has recently demonstrated that electroless deposition can be considered as an alternative and efficient approach [3,4]. Presently used process of electroless plating onto plastics requires a pretreatment based on chromic acid etching for oxidizing the surface. This pretreatment increases the surface energy and wettability for the subsequent step of surface activation with noble metal catalysts. Thus, the development of simple, cost-effective and environment friendly strategies, such as avoiding chromic acid etching and/or minimizing the gravimetric use of noble metal, to metallize the surface of insulating substrates is of huge interest. Here, we report a simple one step covalent amination of the surface of commercial structural polymers employing diazonium-based aqueous chemistry. These amine-terminated functionalities allow minimizing the quantity of palladium cations used as catalyst for the subsequent electroless nickel deposition, as well as offer excellent adhesion between the polymer substrate and the nickel film. X-ray photoelectron spectroscopy is carried out to elucidate the mechanism of surface functionalization with amine groups. We then focus our attention on the comprehensive characterization of the metallic thin film through scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy techniques. Keywords: Metallization of plastics, diazonium chemistry, covalent grafting, environment plating process, MEMS fabrication Reference W. Dai et al., Sensors and Actuators A 135 (2007) 300–307. Y. Liu et al., Progress in Polymer Science 52 (2016) 79–106. Y. Shacham-Diamand et al. Microelectron. Eng. 132 (2015) 35–45. G. Zeb et al., Applied Surface Science 407 (2017) 518–525.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Molecular Junctions and Nanostructures · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Selective metallization of cured SU-8 microstructures using electroless plating method10.1016/j.sna.2006.07.015 ↗
2. “2D or not 2D”: shape-programming polymer sheets10.1016/j.progpolymsci.2015.09.001 ↗
3. 30 years of electroless plating for semiconductor and polymer micro-systems10.1016/j.mee.2014.09.003 ↗
4. Chemical metallization of KMPR photoresist polymer in aqueous solutions10.1016/j.apsusc.2017.02.231 ↗
5. Electroless nickel plating onto Plexiglas® through simple covalent grafting of vinylpyridine seed layer10.1016/j.matdes.2018.02.027 ↗
6. Adhesion enhancement between electroless nickel and polyester fabric by a palladium-free process10.1016/j.apsusc.2010.10.129 ↗
7. Electroless plating of PVC plastic through new surface modification method applying a semi-IPN hydrogel film10.1016/j.apsusc.2013.04.035 ↗
8. Surface modification of an epoxy resin with polyamines and polydopamine: adhesion toward electroless deposited copper10.1016/j.apsusc.2015.06.114 ↗
9. Durable electroless Ni and Ni-P-B plating on aromatic polysulfonamide (PSA) fibers with different performances via chlorine-aided silver activation strategy10.1016/j.surfcoat.2016.05.087 ↗
10. Heat-resistant organic molecular layer as a joint interface for metal reduction on plastics surfaces10.1016/j.apsusc.2016.01.235 ↗
11. On the chemical grafting of titanium nitride by the diazonium chemistry10.1039/C5RA07875J ↗
12. An application of diazonium-induced anchoring process in the fabrication of micro-electro-mechanical systems10.1002/admt.201700159 ↗
13. Moisture resistance of SU-8 and KMPR as structural material10.1016/j.mee.2008.12.076 ↗
14. Variation of thermal and mechanical properties of KMPR due to processing parameters10.1088/0960-1317/22/12/125023 ↗
15. Fabrication and characterization of aluminum thin film heaters and temperature sensors on a photopolymer for lab-on-chip systems10.1016/j.sna.2013.01.035 ↗
16. Diazonium induced anchoring process: an application to improve the monovalent selectivity of cation exchange membranes10.1039/b918915g ↗
17. Plasma treatment process for palladium chemisorption onto polymers before electroless deposition10.1149/1.1836467 ↗
18. XPS studies of nitrogen-containing conjugated polymers–palladium systems10.1016/S0039-6028(02)01372-9 ↗
19. Palladium (+2) reduction: a key step for the electroless Ni metallization of insulating substrates by a tin-free process10.1016/j.tsf.2006.05.032 ↗
20. Noncovalent mechanism for the conformal metallization of nanostructured parylene films10.1021/la9034529 ↗
21. Mallory · 1990
22. New interpretations of XPS spectra of nickel metal and oxides10.1016/j.susc.2006.01.041 ↗
23. Electroless plated Ni–Bx films as highly active electrocatalysts for hydrogen production from water over a wide pH range10.1016/j.nanoen.2015.11.020 ↗
24. Increase of boron content in electroless nickel-boron coating by modification of plating conditions10.1016/j.surfcoat.2017.01.009 ↗
25. Electrical characteristics of poly(3-hexylthiophene) organic thin film transistor with electroplated metal gate electrodes on polyimide10.1016/j.tsf.2006.10.018 ↗
26. Shape evolution of electrodeposited bumps with shallow and deep cavities10.1149/1.3232014 ↗
27. Method for patterning various nanomaterials: electrochemical deposition of patterned Ni thin films and their utilization as a strippable mask10.1021/am200325b ↗
28. Pd–Ni–P metallic glass pattern with controllable microstructure fabricated by electroless alloy plating10.1016/j.mee.2011.02.081 ↗
29. Single-joint shear strength of micro cu pillar solder bumps with different amounts of intermetallics10.1016/j.microrel.2012.06.116 ↗
30. Fabrication and characterization of thin film nickel hydroxide electrodes for micropower applications10.1021/acsami.5b01962 ↗
31. All-wet fabrication process for ULSI interconnect technologies10.1016/j.electacta.2005.04.069 ↗
32. Electroplating of copper conductive layer on the electroless-plating copper seed layer10.1149/1.1527410 ↗