journal article·2012-09

Structural, optical and magnetic resonance properties of TiO2 fibres grown by laser floating zone technique

J. Rodrigues, M. Peres, A.J.S. Fernandes, M.P.F. Graça, N.A. Sobolev, F.M. Costa, T. Monteiro

Applied Surface Science· Volume 258· Issue 23
Publisher page

Abstract

TiO2 fibres grown by the laser floating zone technique show the rutile crystalline phase as identified by X-ray diffraction and Raman spectroscopy. Scanning electron microscopy evidences a uniform surface, free of inclusions and without low-angle grain boundaries and bubbles. At low temperatures, the fibres luminescence is dominated by a richly structured optical centre with two well-defined zero-phonon lines at 1.579 eV and 1.574 eV followed by an intense vibronic sideband with a maximum close to 1.47 eV. Electron paramagnetic resonance revealed that substitutional chromium and iron ions are present as contaminants in the grown fibres, alongside with Ti3+ interstitials and other structural defects. The chemical nature of the defect responsible for the structured near-infrared luminescence is discussed. Highlights ► TiO2 fibres grown by the laser floating zone technique for the first time. ► Magnetic, optical and structural characterization was performed. ► Structured luminescence with two zero-phonon lines followed by a phonon sideband. ► Fe3+ and Cr3+ present as substitutional impurities alongside with Ti3+ interstitials. ► A discussion of the chemical nature of the defect responsible for the luminescence is performed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Glass properties and applications · Luminescence Properties of Advanced Materials · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
2. Unprecedented ultra-high hydrogen gas sensitivity in undoped titania nanotubes10.1088/0957-4484/17/2/009 ↗
3. A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties, and solar energy applications10.1016/j.solmat.2006.04.007 ↗
4. Photonic crystal structures in titanium dioxide (TiO2) and their optimal design10.1364/OPEX.13.001486 ↗
5. High-speed float zone growth of rutile single crystals inclined at 48° to the c-axis10.1016/j.jcrysgro.2004.04.117 ↗
6. Oxygen vacancy origin of the surface band-gap state of TiO2 (110)10.1103/PhysRevLett.104.036806 ↗
7. The role of interstitial sites in the Ti3d defect state in the band gap of titania10.1126/science.1159846 ↗
8. Photoinduced electron paramagnetic resonance study of electron traps in TiO2 crystals: oxygen vacancies and Ti3+ ions10.1063/1.3124656 ↗
9. Identification of two light-induced charge states of the oxygen vacancy in single-crystalline rutile TiO210.1103/PhysRevB.80.235204 ↗
10. Fluorine donors and Ti3+ ions in TiO2 crystals10.1103/PhysRevB.81.035204 ↗
11. Growth of rutile single crystals by floating zone method10.1016/0022-0248(91)90310-2 ↗
12. Floating zone growth and characterization of aluminum-doped rutile single crystals10.1016/0022-0248(95)00972-8 ↗
13. Floating-zone growth of rutile single crystals inclined at 48° to the c-axis10.1016/S0022-0248(99)00446-7 ↗
14. Some observations on the growth of rutile single crystals using the optical floating zone method10.1016/j.jcrysgro.2005.04.110 ↗
15. Characteristics of rutile single crystals grown under two different oxygen partial pressures10.1016/j.jcrysgro.2004.04.105 ↗
16. Growth of TiO2 single crystals and bicrystals by the laser-heated floating-zone method10.1111/j.1151-2916.1998.tb02378.x ↗
17. Electronic and optical properties of three phases of titanium dioxide: rutile, anatase, and brookite10.1103/PhysRevB.51.13023 ↗
18. Raman spectra of TiO2, MgF2, ZnF2, FeF2, and MnF210.1103/PhysRev.154.522 ↗
19. Resolved quadrupolar transition in TiO210.1103/PhysRevLett.39.1490 ↗
20. Fine structure in the intrinsic absorption edge of TiO210.1103/PhysRevB.18.5606 ↗
21. Red-orange photoluminescence in TiO2: W10.1063/1.1653218 ↗
22. Photoluminescence in TiO2 anatase single crystals10.1016/0038-1098(93)90427-O ↗
23. Time-resolved study of photoluminescence in anatase TiO210.1016/S0022-2313(99)00525-6 ↗
24. Near-infrared photoluminescence in titania: evidence for phonon-replica effect10.1063/1.1586961 ↗
25. No-phonon 4T2g–4A2g transitions of Cr3+ in TiO210.1103/PhysRevB.2.590 ↗
26. Thermally stimulated currents and luminescence in rutile (TiO2)10.1063/1.1651872 ↗
27. Fe in III–V and II–VI semiconductors10.1002/pssb.200743315 ↗
28. Zeeman effect of no-phonon 4A2g–4T2g Transition of Cr3+ in TiO210.1103/PhysRevB.8.1032 ↗
29. Temperature dependences of Cr+3 radiative and nonradiative transitions in ruby and emerald10.1103/PhysRevB.11.3251 ↗
30. Photoconductivity and Photoluminescence kinetics associated with the luminescence center in rutile (TiO2)10.1103/PhysRevB.8.4842 ↗
31. Relation between absorption and emission in the region of the R lines of ruby10.1103/PhysRev.137.A1117 ↗
32. Chromium-doped titania as a maser material10.1063/1.1735894 ↗
33. F- and X-band spectroscopy on Fe3+ in rutile10.1103/PhysRev.184.381 ↗
34. Interaction and ordering of lattice defects in oxygen-deficient rutile TiO2−x10.1103/PhysRevB.48.12406 ↗