Enhanced cracking conversion of supercritical fuel over stabilized Pt nanoparticles supported SiO2-Al2O3 catalyst coating
Source abstract
Abstract
Abstract Catalytic cracking of fuel is an effective method to solve the thermal barrier of hypersonic aerocraft, but requires catalysts that are durable and highly active under high temperature. In this contribution, Pt nanoparticles loaded SiO2-Al2O3 catalyst (PSA-re) was synthesized through modified colloid deposition method (CDM), aiming to improve the stability and dispersion of Pt in the reaction. PSA-re exhibited high cracking activity that heat sink of above 3.9 MJ/kg at 750 °C and stand for 30 min without obvious activity decreasing. Characterizations with Py-FTIR, H2-TPR, CO chemisorption, XPS, XRD, STEM and CO-DRIFTS techniques on the catalysts revealed that the Pt nanoparticles were dispersed on the PSA-re uniformly and PSA-re have smaller particle size as well as higher Pt dispersion compared with catalyst (PSA-im) that prepared by incipient wetness impregnation method (IWIM). The high activity of PSA-re is strongly associated with abundant accessible Pt metal sites and appropriate acid sites distribution on the surface. Meantime, the outstanding stability is mainly due to anti-sintering ability of Pt particles and alleviated carbon deposition to reduce the loss of Pt metal sites and acid sites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysis and Oxidation Reactions · Heat transfer and supercritical fluids · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A century of ramjet propulsion technology evolution10.2514/1.9178 ↗
2. Endothermic fuels for hypersonic vehicles10.2514/3.44255 ↗
3. Thermal management method of fuel in advanced aeroengines10.1016/j.energy.2012.10.050 ↗
4. Heat transfer and thermal cracking behavior of hydrocarbon fuel10.1016/j.fuel.2012.09.021 ↗
5. Thermal cracking of JP-10: Kinetics and product distribution10.1016/j.jaap.2005.10.003 ↗
6. An innovative self-adaptive method for improving heat sink utilization efficiency of hydrocarbon fuel in regenerative thermal protection system of combined cycle engine10.1016/j.enconman.2018.10.038 ↗
7. Ignition characteristics of cracked JP-7 fuel10.1016/j.combustflame.2005.06.001 ↗
8. Combustion and ignition of thermally cracked kerosene in supersonic model combustors10.2514/1.26402 ↗
9. Coke suppression of kerosene by wall catalytic steam reforming
10. Thermal/catalytic cracking of liquid hydrocarbons for the production of olefins: A state-of-the-art review II: Catalytic cracking review10.1016/j.fuel.2016.01.047 ↗
11. Molecular interaction of heterogeneous catalyst in catalytic cracking process of vegetable oils: Chromatographic and biofuel performance investigation10.1016/j.apcatb.2018.07.070 ↗
12. Reaction pathways of n-pentane cracking on the fresh and regenerated Sr, Zr and La-loaded ZSM-5 zeolites10.1016/j.cej.2018.05.026 ↗
13. Hydrogen transfer, coke formation, and catalyst decay and their role in the chain mechanism of catalytic cracking10.1080/01614949608006455 ↗
14. The mechanism of paraffin reactions on HY zeolite10.1016/0021-9517(89)90002-X ↗
15. Impact of acidity in ZrO2-TiO2-Al2O3 composite oxides on the catalytic activity and coking behaviors during n-decane cracking10.1016/j.fuel.2018.06.011 ↗
16. Creation of Al-enriched mesoporous ZSM-5 nanoboxes with high catalytic activity: converting tetrahedral extra-framework Al into framework sites by post treatment10.1002/anie.202002416 ↗
17. Characterization of the surface acidity of MFI zeolite nanosheets by 31P NMR of adsorbed phosphine oxides and catalytic cracking of decalin10.1021/cs300824e ↗
18. Role of acidity in catalytic cracking of n-decane over supported Pt-based catalysts10.1016/j.apsusc.2019.145113 ↗
19. Synthesis of a high-stability nanosized Pt-loaded MgAl2O4 catalyst for n-decane cracking with enhanced activity and durability10.1021/acs.iecr.9b06515 ↗
20. Thiotolerant Ir/SiO2-Al2O3 bifunctional catalysts: effect of metal-acid site balance on tetralin hydroconversion10.1016/j.jcat.2010.12.008 ↗
21. The performance of Rh/SiO2-Al2O3 catalysts in methycyclohexane cracking reaction10.1016/j.jaap.2017.02.012 ↗
22. Effect of Pt and Gd on coke formation and regeneration during JP-8 cracking over ZSM-5 catalysts10.1016/j.apcatb.2014.12.027 ↗
23. Catalytic cracking of n-decane over monometallic and bimetallic Pt-Ni/MoO3/La-Al2O3 catalysts: Correlations of surface properties and catalytic behaviors10.1021/acs.iecr.8b04712 ↗
24. Propane dehydrogenation over Pt/TiO2-Al2O3 catalysts10.1021/cs501279v ↗
25. New strategy for high-performance integrated catalysts for cracking hydrocarbon fuels10.1021/acsami.9b14285 ↗
26. Comparative study of propane dehydrogenation over V-, Cr-, and Pt-based catalysts: Time on-stream behavior and origins of deactivation10.1016/j.jcat.2012.06.005 ↗
27. Preparations and remarkable catalytic cracking performances of Pt@FGS/JP-10 nanofluids10.1016/j.fuel.2019.04.119 ↗
28. Pt/Cu single-atom alloys as coke-resistant catalysts for efficient C-H activation10.1038/nchem.2915 ↗
29. Propane dehydrogenation over Pt clusters localized at the Sn single-site in zeolite framework10.1021/acscatal.9b03527 ↗
30. Size effect of Pt nanoparticles on the catalytic oxidation of Ttoluene over Pt/CeO2 catalysts10.1016/j.apcatb.2017.07.048 ↗
31. Importance of platinum particle size for complete oxidation of toluene over Pt/ZSM-5 catalysts10.1039/C4CC09383F ↗
32. Platinum and N-doped carbon nanostructures as catalysts in hydrodechlorination reactions10.1016/j.apcatb.2018.07.054 ↗
33. Catalytic dehydrogenation of light alkanes on metals and metal oxides10.1021/cr5002436 ↗
34. Carbon nanotubes supported Pt catalysts for phenylacetylene hydrogenation: Effects of oxygen containing surface groups on Pt dispersion and catalytic performance10.1016/j.cattod.2011.09.005 ↗
35. Uniform Pt/Pd bimetallic nanocrystals demonstrate platinum effect on palladium methane combustion activiy and stability10.1021/acscatal.7b00393 ↗
36. Enhancement of SCR activity and SO2 resistance on VOx /TiO2 catalyst by addition of molybdenum10.1016/j.cej.2015.08.152 ↗
37. High hydrogen delectivity and anti-carbon ability by cracking of RP-3 jet fuel over Pt/ZrO2-TiO2-Al2O3 catalyst modified by MxOy (M=Ba, Sr and Ce) promoters10.1016/j.ijhydene.2017.03.075 ↗
38. Quantitative determination of acid sites on silica-alumina10.1016/j.apcata.2010.10.001 ↗
39. Enhanced surface acidity in mixed alumina-silicas: a low-temperature FTIR study10.1016/S0926-860X(99)00474-3 ↗
40. Formation of acid sites in amorphous silica-alumina10.1016/j.jcat.2009.11.008 ↗
41. Methane combustion activity of Pd-PdOx-Pt/Al2O3 catalyst: The role of platinum promoter10.1016/j.molcata.2011.12.023 ↗
42. Promotional effects of ethylenediamine on the low-temperature catalytic activity of selective catalytic oxidation of ammonia over Pt/SiAlOx: states and particle sizes of Pt10.1016/j.apsusc.2019.03.199 ↗
43. Dehydrogenation of methylcyclohexane over Pt/TiO2 Catalyst10.1007/s10562-015-1623-3 ↗
44. Origin of electronic modification of platinum in a Pt3V alloy and its consequences for propane dehydrogenation catalysis10.1021/acsaem.9b01373 ↗
45. Role of boron in enhancing the catalytic performance of supported platinum catalysts for the nonoxidative dehydrogenation of n-butane10.1021/acscatal.9b04689 ↗
46. Effect of particle size and composition on CO-tolerance at Pt-Ru/C catalysts analyzed by in situ attenuated total reflection FTIR spectroscopy10.1021/cs200550t ↗
47. Effect of valence state and particle size on NO oxidation in fresh and aged Pt-based diesel oxidation catalysts10.1016/j.apsusc.2018.03.032 ↗
48. The unique role of CaO in stabilizing the Pt/Al2O3 catalyst for the dehydrogenation of cyclohexane10.1002/cctc.201200067 ↗
49. Coordinatively unsaturated Al3+ centers as binding sites for active catalyst phases of platinum on γ-Al2O310.1126/science.1176745 ↗
50. Pd-based catalysts by colloid synthesis using different reducing reagents for complete oxidation of methane10.1007/s10562-019-02754-2 ↗
51. Dehydrogenation of light alkanes to mono-olefins
52. Preparation of Al2O3 coating on TiN coating by polymer-assisted deposition to improve oxidation resistance in coking inhibition applications10.1016/j.ceramint.2019.11.281 ↗
53. Atomic layer deposition of alumina passivation layers in high-aspect-ratio tubular reactors for coke suppression during thermal cracking of hydrocarbon fuels10.1021/ie5047818 ↗
54. Experimental study on effect of pressure on heat sink of n-decane10.1016/j.cej.2013.12.081 ↗
55. Thermal decomposition of C10–C14 normal alkanes in near-critical and supercritical regions: Product distributions and reaction mechanisms10.1021/ie960392b ↗
56. Chemical mechanisms of catalytic cracking over solid acidic catalysts: alkanes and alkenes10.1081/CR-100104387 ↗
57. Experimental and modeling study of thermal and catalytic cracking of n-decane10.1016/j.jaap.2014.10.021 ↗
58. β-Scission of olefins on acidic zeolites: a periodic PBE-D study in H-ZSM-510.1021/jp403504n ↗