Morphology of composite coatings formed on Mo1 substrate using hot-dip aluminising and micro-arc oxidation techniques
Source abstract
Abstract
Abstract A hot-dip aluminised layer was prepared on a Mo1 substrate and the obtained layer was oxidised in situ by a micro-arc oxidation (MAO) technique to form an oxide ceramic coating. The obtained hot-dip aluminised layer had a two-layer structure overall: the outer layer was a pure aluminium layer, and the inner layer was a diffusion layer. The hot-dip aluminising temperature directly influenced the structure and phase composition of the obtained diffusion layer. The diffusion layer of the hot-dip aluminised layer at 710 °C was divided into three layers. The inner, intermediate, and outer layers were mainly composed of Al8Mo3, Al4Mo, and Al12Mo phases, respectively. The diffusion layer of the hot-dip aluminised layer at 750 °C was divided into two layers: the inner layer was mainly composed of an Al8Mo3 phase, and the outer layer of Al4Mo. After the hot-dip aluminised layer was treated by MAO, a three-layer coating was obtained. The outer layer was a ceramic one obtained by MAO, which was mainly composed of Al2O3, mullite, and unoxidized aluminium. The middle one was pure aluminium obtained by hot-dip aluminising and without MAO. The inner layer was an Al–Mo diffusion layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Microstructural design and property optimization of Mo alloy with high performance
2. Studies on the development of protective coating on TZM alloy and its subsequent characterization10.1016/j.jmatprotec.2007.12.075 ↗
3. Characterization of molybdenum particles reinforced Al6082 aluminum matrix composites with improved ductility produced using friction stir processing10.1016/j.matchar.2017.01.016 ↗
4. A study of methods to enhance infrared emissivity of Molybdenum surfaces10.1016/j.fusengdes.2018.12.002 ↗
5. Corrosion of defective molybdenum insert in liquid glass as the main reason of accident at glass-melting furnace10.1016/j.engfailanal.2018.08.012 ↗
6. Development of silicide coating over molybdenum based refractory alloy and its characterization10.1016/j.jnucmat.2010.06.014 ↗
7. Dilution of molybdenum on aluminum during laser surface alloying10.1016/j.jallcom.2013.03.115 ↗
8. Formation of MoSi2–SiO2 coatings on molybdenum substrates by CVD/MOCVD10.1016/j.surfcoat.2005.02.212 ↗
9. The development and testing of emissivity enhancement coatings for themophotovoltaic (TPV) radiator applications10.1016/S0040-6090(99)00438-1 ↗
10. Deposition of alumina hard coatings by bipolar pulsed PECVD10.1016/S0257-8972(02)00482-6 ↗
11. Al2O3–ZrO2–SiO2 Ternary glasses for molybdenum oxidation barriers10.1111/j.1551-2916.2005.00189.x ↗
12. The correlation between the coating structure and the corrosion behavior of the plasma electrolytic oxidation coating on aluminum10.1016/j.surfcoat.2015.12.040 ↗
13. Fabrication and wear resistance of TiO2/Al2O3 coatings by micro-arc oxidation10.1016/S1875-5372(17)30071-1 ↗
14. Growth kinetics and morphology of plasma electrolytic oxidation coating on aluminum10.1016/j.matchemphys.2016.10.019 ↗
15. A mechanism for the growth of a plasma electrolytic oxide coating on Al10.1016/j.electacta.2016.04.186 ↗
16. Plasma electrolytic oxidation of titanium in a phosphate/silicate electrolyte and tribological performance of the coatings10.1016/j.apsusc.2014.08.037 ↗
17. Aluminizing and oxidation treatment of 1Cr18Ni9 stainless steel10.1016/j.apsusc.2003.11.076 ↗
18. Microstructure and oxidation of hot-dip aluminized titanium at high temperature10.1016/j.apsusc.2005.01.002 ↗
19. Growth and surface morphology of hot-dip Al–Si on 9Cr-1Mo steel10.1016/j.matchar.2008.08.003 ↗
20. High-temperature oxidation behavior of hot-dipped aluminide mild steel with various silicon contents10.1016/j.apsusc.2013.03.030 ↗
21. Comparative research on dry sliding wear of hot-dip aluminized and uncoated AISI H13 steel10.1016/j.wear.2015.10.017 ↗
22. TEM analysis and wear resistance of the ceramic coatings on Q235 steel prepared by hybrid method of hot-dipping aluminum and plasma electrolytic oxidation10.1016/j.jallcom.2011.08.103 ↗
23. Influence of duty cycle on the growth behavior and wear resistance of microarc oxidation coatings on hot dip aluminized cast iron10.1016/j.surfcoat.2017.12.064 ↗
24. Thermodynamic assessment of the Al-Mo system and of the Ti-Al-Mo System from 0 to 20 at.% Ti10.1016/j.intermet.2010.03.010 ↗
25. Formation of Al-Mo intermetallic particle-strengthened aluminum alloys by friction stir processing10.1016/j.intermet.2012.11.018 ↗
26. High-temperature phase equilibria with the bcc-type β (AlMo) phase in the binary Al-Mo system10.1016/j.intermet.2016.12.004 ↗
27. Laser surface alloying of molybdenum on aluminum for enhanced wear resistance10.1016/j.surfcoat.2014.08.074 ↗
28. Thermal stability of Al-Mo thin film alloys10.1016/j.jallcom.2015.06.022 ↗
29. Solid solution or amorphous phase formation in Al-Mo alloyed films and their mechanical properties10.1016/j.jallcom.2018.02.230 ↗
30. A ceramic coating on carbon steel and its superhydrophobicity10.1016/j.apsusc.2019.04.235 ↗