journal article·2019-02

Grain size dependence of the radiation tolerances of nano-amorphous Ti-Si-N composite coatings

Q. Wan, B. Yang, Y.M. Chen, H.D. Liu, F. Ren

Publisher page

Abstract

Abstract Materials with large fractions of interfaces (e.g. nanocrystalline materials and multilayered nanofilms) have attracted attention because of their significantly enhanced ability to tolerate severe irradiation environments. In this paper, the microstructure and nanohardness evolutions of Ti-Si-N nano-amorphous composite coatings with grain sizes from 5 nm to 12 nm were investigated using 50 keV He+ ion bombardment at room temperature. All samples contained amorphous layers that caused decreases in hardness. The amorphous layer thickness and hardness decrement first decreased with the grain size and then increased. Results suggested that the nano/amorphous interfaces in Ti-Si-N coatings can effectively promote defect annihilation during irradiation. However, radiation tolerance was optimized in materials with 9 nm grains due to the competition between the increase in free energy and the energy stored in defects (Esto). In addition, this paper proposed a mechanism that explained the associated decrease in hardness. These results provided the theoretical underpinnings for an understanding of nano-composite material radiation behavior under irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Ion-surface interactions and analysis · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Looking ahead at reactor development10.1016/j.pnucene.2017.07.001 ↗
2. A thermodynamic approach for advanced fuels of gas-cooled reactors10.1016/j.jnucmat.2005.04.041 ↗
3. Xenon migration behaviour in titanium nitride10.1016/j.jnucmat.2007.01.239 ↗
4. Xenon behavior in TiN: a coupled XAS/TEM study10.1016/j.jnucmat.2012.10.046 ↗
5. Nitrides as a nuclear fuel option10.1016/j.jeurceramsoc.2005.03.181 ↗
6. Coated particle fuel to improve safety, design, economics in water-cooled and gas-cooled reactors
7. Preparation and characterization of PuN pellets containing ZrN and TiN10.1016/S0022-3115(00)00393-7 ↗
8. Radiation effects in SiC for nuclear structural applications10.1016/j.cossms.2012.03.005 ↗
9. Materials science. How does radiation damage materials?10.1126/science.1150394 ↗
10. Observation of the one-dimensional diffusion of nanometer-sized dislocation loops10.1126/science.1145386 ↗
11. Radiation-induced amorphization resistance and radiation tolerance in structurally related oxides.10.1038/nmat1842 ↗
12. Ion-irradiation-induced amorphization of La2 Zr2O7 pyrochlore10.1103/PhysRevB.66.054108 ↗
13. In situ TEM study of the stability of nano-oxides in ODS steels under ion-irradiation10.1016/j.jnucmat.2011.12.009 ↗
14. Micro-structure and micro-hardness of ODS steels after ion irradiation10.1016/j.jnucmat.2011.01.067 ↗
15. Grain size effect on radiation tolerance of nanocrystalline Mo10.1016/j.scriptamat.2016.06.007 ↗
16. Enhanced radiation resistance of nanocrystalline pyrochlore Gd2(Ti0.65Zr0.35)2O710.1063/1.3155855 ↗
17. Ion irradiation effects in nanocrystalline TiN coatings10.1016/j.nimb.2007.04.248 ↗
18. Radiation tolerant nanocrystalline ZrN films under high dose heavy-ion irradiations10.1063/1.4917381 ↗
19. Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten10.1016/j.actamat.2016.10.007 ↗
20. The influence of grain boundaries on radiation-induced point defect production in materials: a review of atomistic studies10.1007/s11837-012-0544-5 ↗
21. Role of atomic structure on grain boundary-defect interactions in Cu10.1103/PhysRevB.85.214103 ↗
22. Efficient annealing of radiation damage near grain boundaries via interstitial emission10.1126/science.1183723 ↗
23. Mechanism for recombination of radiation-induced point defects at interphase boundaries
24. Interface structure and radiation damage resistance in Cu-Nb multilayer nanocomposites10.1103/PhysRevLett.100.136102 ↗
25. Enhanced radiation tolerance of ultrafine grained Fe–Cr–Ni alloy10.1016/j.jnucmat.2011.10.001 ↗
26. Enhanced ion irradiation resistance of bulk nanocrystalline TiNi alloy10.1016/j.scriptamat.2008.06.051 ↗
27. Effects of ion irradiation on structural and mechanical properties of crystalline Fe/amorphous SiOC nanolaminates10.1016/j.actamat.2017.08.031 ↗
28. Ion irradiation tolerance of Ti-Si-N nanocomposite coating10.1016/j.surfcoat.2016.08.044 ↗
29. Nanocrystalline zirconia can be amorphized by ion irradiation.
30. A formation mechanism for the macroparticles in arc ion-plated TiN films10.1016/S0040-6090(00)01918-0 ↗
31. Composition demixing effect on cathodic arc ion plating
32. Corrosion behaviors of TiN and Ti- Si -N (with 2.9 at.% and 5.0 at.%Si) coatings by electrochemical impedance spectroscopy10.1016/j.tsf.2016.08.005 ↗
33. Cathodic arc deposited (Cr, Six)N coatings: from solid solution to nanocomposite structure10.1016/j.surfcoat.2012.10.032 ↗
34. Influence of bias voltages on the structure and wear properties of Ti-Si-N coating synthesized by cathodic arc plasma evaporation10.1016/j.tsf.2007.07.087 ↗
35. Effect of bias voltage on the structure and hardness of Ti-Si-N composite coatings synthesized by cathodic arc assisted middle-frequency magnetron sputtering10.1016/j.jallcom.2008.06.003 ↗
36. Electron irradiation-induced nanocrystallization of amorphous FeB alloy: evidence for athermal nature10.1016/j.actamat.2008.11.009 ↗
37. Electron or ion irradiation-induced phase-change mechanism between amorphous and crystalline state10.1016/j.actamat.2010.12.025 ↗
38. Models and mechanisms of irradiation-induced amorphization in ceramics10.1016/S0168-583X(99)00643-6 ↗
39. Grain size threshold for enhanced irradiation resistance in nanocrystalline and ultrafine tungsten10.1080/21663831.2017.1292326 ↗
40. Radiation tolerance in a nanostructure: is smaller better?10.1016/j.nimb.2008.01.039 ↗
41. Design of radiation tolerant materials via interface engineering.10.1002/adma.201303400 ↗
42. Instability of irradiation induced defects in nanostructured materials10.1016/S0168-583X(96)00863-4 ↗
43. Enhanced radiation tolerance in nanocrystalline MgGa2O410.1063/1.2753098 ↗
44. Radiation damage effects in zirconia10.1016/S0022-3115(99)00041-0 ↗
45. Superhard nanocrystalline composite materials: the TiN/Si3N4 system10.1063/1.113110 ↗
46. Effect of negative substrate bias on the microstructure and mechanical properties of Ti–Si–N films deposited by a hybrid filtered cathodic arc and ion beam sputtering technique10.1016/j.apsusc.2012.03.127 ↗
47. Size-dependent radiation tolerance in ion irradiated TiN/AlN nanolayer films10.1016/j.jnucmat.2013.05.035 ↗
48. Unusual room-temperature compressive plasticity in nanocrystal-toughened bulk copper-zirconium glass10.1080/09500830500197724 ↗
49. Unusual room temperature ductility of a Zr-based bulk metallic glass containing nanoparticles10.1063/1.2746071 ↗
50. Plasticity of bulk metallic glasses improved by controlling the solidification condition10.1557/jmr.2008.0127 ↗
51. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗