Evaluation of surface treatment on Li2Mg3SnO6 ceramic powders and the application of Li2Mg3SnO6 powders filled polytetrafluoroethylene composites
Source abstract
Abstract
Abstract In this paper, we studied the properties of polytetrafluoroethylene (PTFE) based and Li2Mg3SnO6 (LMS) filled composites. The LMS powders were synthesized by one synthetic process and modified by C14H19F13O3Si (F8261). The content of modified LMS changed from 26 to 66 wt%. XRD and TEM were employed to investigate the crystal phase of obtained LMS. The analysis of XPS and Contact Angle were conducted to study the surface characteristics of F8261 modified LMS. The morphology, microstructure, dielectric properties of PTFE based composites filled with untreated LMS and modified LMS were investigated in detail. Further, various theoretical models were put forward to discuss the dielectric constant of the composites. At last, the modified LMS filled PTFE composites exhibited reliable dielectric constant (er = 3.61), acceptable dielectric loss (tan δ = 0.002), stable frequency dependence of dielectric constant and low temperature coefficient of dielectric constant (τe = 9.42 ppm/°C) at filler loading of 46 wt% LMS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. MgTiO3 filled PTFE composites for microwave substrate applications10.1016/j.matchemphys.2013.04.043 ↗
2. Effect of coupling agents on the dielectric properties of CaCu3Ti4O12/PVDF composites10.1016/j.compositesb.2013.02.006 ↗
3. Novel water insoluble (NaxAg2-x)MoO4 (0 ≤ x≤ 2) microwave dielectric ceramics with spinel structure sintered at 410 degrees10.1039/C7TC01718A ↗
4. Structure, microwave dielectric properties, and low-temperature sintering of acceptor/donor codoped Li2Ti1−x(Al0.5Nb0.5)xO3 ceramics10.1111/jace.14055 ↗
5. Structure and microwave dielectric characteristics of lithium-excess Ca0.6Nd0.8/3TiO3/(Li0.5Nd0.5)TiO3 ceramics10.1016/j.materresbull.2013.07.025 ↗
6. Temperature stable low loss PTFE/rutile composites using secondary polymer10.1007/s00339-010-6088-z ↗
7. Effects of silane coatings in aqueous and non-aqueous media on the properties of magnesia filled PTFE laminates10.1016/j.matchemphys.2010.03.014 ↗
8. Microstructure and microwave dielectric properties of Na1/2 Sm1/2 TiO3 filled PTFE, an environmental friendly composites
9. Influence of silane coupling agent on morphology and dielectric property in BaTiO3/polyvinylidene fluoride composites10.1063/1.2338529 ↗
10. Mechanical, thermal and microwave dielectric properties of Mg2SiO4 filled Polyteterafluoroethylene composites10.1016/j.ceramint.2016.01.162 ↗
11. Effect of coupling agent on the thermal and dielectric properties of PTFE/Sm2Si2O7 composites10.1016/j.compositesa.2010.04.013 ↗
12. Effect of silane as coupling agent on the dielectric properties of BaTiO3-epoxy composites10.1016/j.compositesa.2007.04.003 ↗
13. Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent10.1016/j.compositesb.2016.11.050 ↗
14. The use of tetraethyl orthosilicate silane (TEOS) for surface-treatment of hardened cement-based materials: a comparison study with normal treatment agents10.1016/j.conbuildmat.2016.05.028 ↗
15. Temperature stable and high-Q microwave dielectric ceramics in the Li2Mg3−xCaxTiO6 system (x = 0.00–0.18)10.1016/j.ceramint.2016.08.055 ↗
16. Phase evolution, structure and microwave dielectric properties of Li2+xMg3SnO6 (x = 0.00–0.12) ceramics10.1016/j.ceramint.2017.07.074 ↗
17. Low temperature sintering of high permittivity Ca-Li-Nd-Ti microwave dielectric ceramics with BaCu (B2O5) additives10.1016/j.jallcom.2016.09.292 ↗
18. Effects of (Cr0.5Ta0.5)4+ on structure and microwave dielectric properties of Ca0.61Nd0.26TiO3 ceramics10.1016/j.ceramint.2018.01.207 ↗
19. Structure–property relationships of perovskite-structured Ca0.61Nd0.26Ti1-x(Cr0.5Nb0.5)xO3 ceramics10.1016/j.ceramint.2017.12.186 ↗
20. Co2O3 substitution effects on the structure and microwave dielectric properties of low-firing (Zn0.9Mg0.1)TiO3 ceramics10.1016/j.ceramint.2017.12.097 ↗
21. The effects of TiO2 particle size on the properties of PTFE/TiO2 composites
22. Effects of CaTiO3 loading on the properties of PTFE/TiO2 composites
23. High dielectric constant and low dielectric loss hybrid nanocomposites fabricated with ferroelectric polymer matrix and BaTiO3 nanofibers modified with perfluoroalkylsilane10.1016/j.apsusc.2014.03.131 ↗
24. Dielectric constant and loss tangent measurement using a stripline fixture10.1109/96.730430 ↗
25. Structure, microwave dielectric properties, and novel low-temperature sintering of xSrTiO3–(1−x)LaAlO3 ceramics with LTCC application10.1111/jace.14548 ↗
26. Order-disorder transition in the(1-x)Li2TiO3-xMgO system (0 [less-than-or-equal] x [less-than-or-equal] 0.510.1039/C1RA00677K ↗
27. Evaluation of the surface properties of PTFE foam coating filter media using XPS and contact angle measurements10.1016/j.apsusc.2010.11.116 ↗
28. ARXPS study of a plasma-treated polymer surface: an example of Case II diffusion?10.1016/j.elspec.2005.09.011 ↗
29. Plasma-modified polymer surfaces: characterization using XPS10.1016/j.elspec.2009.12.003 ↗
30. Comparison of split post dielectric resonator and ferrite disc resonator techniques for microwave permittivity measurements of polycrystalline yttrium iron garnet10.1088/0957-0233/10/11/305 ↗
31. Effective permittivity of dielectric mixtures10.1109/36.3045 ↗
32. Influence of interphase and moisture on the dielectric spectroscopy of epoxy/silica composites10.1016/j.polymer.2005.01.041 ↗