One way of surface alloying treatment on iron surface based on surface mechanical attrition treatment and heat treatment

Abstract A method of surface alloying treatment has been developed: Ni powders were welded into the surface of iron plates by Surface Mechanical Attrition Treatment (SMAT), followed by annealing at certain temperature for 30 min. A Ni–Fe alloy layer with thickness about 100 μm in the sample surface was fabricated on pure iron plate. Scanning electron microscope (SEM), glow discharge spectrum (GDS), and X-ray diffraction (XRD) methods were used to analyze the microstructure, the composition and the phases of the alloy layer. Studies on the interface microstructure indicated that there was significant atomic diffusion and formation of multilayer of intermetallic compound and solid solution in SMAT process. Subsequent annealing accelerates the alloying process. The corrosion test shows the sample by SMAT treated with Ni powders exhibit the best corrosion resistance.