Effect of cold work on surface reactivity and nano-hardness of alloy 800 in corroding environments
Source abstract
Abstract
Abstract In this paper, in situ scanning electrochemical microscopy (SECM) was used to investigate effect of cold work on surface reactivity of UNS N08800 alloy, and in situ nanoindentation technique was employed to measure corrosion-induced degradation of resistance to plastic deformation in surface layer. The SECM measurements indicated that cold work would cause an increase of surface reactivity, especially on surface area around non-inclusions. According to in situ nanoindentation measurements, anodic dissolution would reduce the surface hardness. This effect was enhanced by cold work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Kilian · 2007
2. Influence of cold working on the pitting corrosion resistance of stainless steels10.1016/j.corsci.2006.08.021 ↗
3. Effect of cold-working in the passive behavior of 304 stainless steel in sulfate media10.1149/1.1516774 ↗
4. Influence of cold work on pitting corrosion behavior of a high nitrogen stainless steel10.1149/1.2939213 ↗
5. The effect of prior cold-work on the deformation behaviour of neutron irradiated AISI 304 austenitic stainless steel10.1016/j.jnucmat.2010.01.029 ↗
6. Assessment of the effects of cold work on crack initiation in a light water environment using the small-punch test10.1007/s11661-008-9492-7 ↗
7. Why stainless steel corrodes?10.1038/415770a ↗
8. Visualisation of the local electrochemical activity of thermal sprayed anti-corrosion coatings using scanning electrochemical microscopy10.1016/j.electacta.2009.03.057 ↗
9. Enhancing image quality of scanning electrochemical microscopy by improved probe fabrication and displacement10.1139/v05-189 ↗
10. Quantitative prediction of environmentally assisted cracking10.5006/1.3292125 ↗
11. Effects of applied stresses on the isothermal and cyclic high-temperature oxidation behavior of superalloys10.1016/j.msea.2010.03.050 ↗
12. Effect of applied potential and surface dissolution on the creep behavior of copper10.1016/0001-6160(74)90159-X ↗
13. Correlation between film rupture ductility and PbSCC susceptibility of alloy 80010.1016/j.electacta.2007.12.070 ↗
14. Response of surface mechanical properties to electrochemical reaction determined by in-situ nano-indentation technique10.1016/j.elecom.2006.04.020 ↗
15. Bard · 2001 · 1
16. Measurement of hardness and elastic modulus by instrumented indentation: advanced in understanding and refinements to methodology10.1557/JMR.1992.1564 ↗
17. Correlating surface microstructures with reactivity on commercially pure zirconium using scanning electrochemical microscopy and scanning electron microscopy10.1016/j.elecom.2009.04.008 ↗
18. Insights into grain structures and their reactivity on grade-2 Ti alloy surfaces by scanning electrochemical microscopy10.1021/cm070023d ↗
19. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
20. Interfaces with strain gradient plasticity: theory and experiments10.1016/j.actamat.2006.06.040 ↗
21. A gradient elasticity approach to the indentation size effect at very small depth10.1515/JMBM.2011.005 ↗
22. Synergism of electrochemical and mechanical factors in erosion–corrosion10.1021/jp051985f ↗
23. Recent developments in the study of hydrogen embrittlement: hydrogen effect on dislocation nucleation10.1016/j.actamat.2010.05.057 ↗
24. Gutman · 1998
25. Crack growth model of pipelines exposed to concentrated carbonate–bicarbonate solution with high pH10.1016/j.corsci.2010.08.023 ↗